How Many Kilometers Can the Baojun 510 Run When the Fuel Gauge Light Comes On?

1 Answers
DeLukas
07/29/25 11:12pm
When the fuel gauge light of the Baojun 510 comes on, it can generally run for about 70 to 80 kilometers on the highway, and approximately 50 kilometers in urban areas. When the fuel gauge light turns yellow, the remaining fuel in the tank is roughly around 10%. However, it is advisable to avoid waiting until the fuel light comes on to refuel, as this can damage the fuel pump. Methods to save fuel: 1. When stopping for a short time, such as at a brief traffic light, simply pressing the brake pedal is sufficient. However, if the stop lasts longer than 2 minutes, it is recommended to shift into N (Neutral) gear to protect the transmission and prevent the transmission fluid from overheating. If the stop exceeds 5 minutes, it is best to shift into P (Park) gear, which is both environmentally friendly and fuel-efficient. 2. During acceleration from a standstill, avoid pressing the accelerator pedal all the way down. This only increases engine RPM, causing unnecessary engine noise and transmission wear, leading to fuel wastage. The correct approach is to gently press the accelerator pedal and utilize low-speed downshifting to increase torque for acceleration. Gradual and uniform acceleration, followed by further acceleration once speed is built up, provides a smoother driving experience for automatic transmission vehicles. 3. Skillfully utilize coasting. Coasting does not mean shifting into neutral but rather releasing the accelerator pedal to allow the vehicle to glide using its own momentum. 4. Regular maintenance is crucial. Frequently check the various fluids in the engine compartment, especially the automatic transmission fluid unique to automatic vehicles. Dirty transmission fluid increases resistance, thereby increasing fuel consumption.
Was this review help?
18
3
Share
More Forum Discussions

How to Adjust the Headlight Height of the Odyssey?

Odyssey headlight adjustment switch lever is located on the left side of the steering wheel back. The light adjustment lever can control the low beam, high beam, turn signal, width indicator light, and fog light of the headlights. The following is the Odyssey headlight adjustment method: 1. The Odyssey headlights are located at the lower edge of the front engine hood, with a long projection distance. 2. Enter the driver's compartment to see the headlight adjustment lever on the left back of the steering wheel. 3. The default state during the day is to turn off the headlights, that is, adjust the gear to the "OFF" position. 4. The AUTO gear is the automatic light adjustment gear, which can automatically adjust the headlights according to the light. 5. The next gear is the width indicator light gear, which is mainly used to let others see you. 6. The bottom one is the high beam gear switch, and the high beam should be used reasonably. Precautions for using car lights: 1. It is recommended to turn on the front and rear fog lights when driving in foggy or rainy days. 2. Use lights reasonably for lighting when driving at night.
4
5
Share

How to Identify the Letter for China 6 Vehicle Emission Standards?

In China's vehicle emission standards from China 1 to China 5, the corresponding characters are I, II, III, IV, and V respectively, while China 6 is represented as Ⅵ. The implementation of the China 6 emission standard will be divided into two phases: "China 6a" and "China 6b", with corresponding time points on July 1, 2020, and July 1, 2023. In fact, China 6a is only a transitional stage from China 5 to China 6, and by 2023, the China 6 emission standard will be fully implemented. Below are the requirements for the China 6 emission standard: 1. The China 6 standard: The China 6 standard is extremely high and is considered one of the strictest vehicle emission standards globally. Compared to the China 5 emission regulations, China 6 adds limits for nitrous oxide and particulate matter particle counts, and requires a 50% reduction in carbon monoxide content during cold start conditions, a 30% reduction in hydrocarbon content, and a 30% reduction in carbon monoxide content. 2. China 5 vehicles can still be driven after the implementation of China 6 standards: Even after the implementation of the China 6 standard, China 5 vehicles can still be driven on the road, although registration and licensing may become more difficult. For those China 5 vehicles in stock, they will definitely be sold at discounted prices, and the closer the date of China 6 implementation gets, the cheaper they will become.
13
0
Share

Should the AC be turned on when using the car's air conditioning?

When using the car's air conditioning, the AC should be turned on. The car's AC activates the air conditioning compressor. Pressing the AC button starts the compressor, which cools the hot and stuffy summer air, allowing cool air to be blown into the car. The car's air conditioning refrigeration system consists of components such as the compressor, condenser, receiver-drier, expansion valve, evaporator, and blower. Below are some tips for maintaining your car's air conditioning: 1. Comprehensive inspection of the air conditioning system. When using the air conditioning for the first time in summer, inspect the system thoroughly. Check the refrigerant level through the liquid storage tank, see if the air filter is too dirty, and ensure there are no foreign objects in the radiator. 2. Pay attention to cleaning the air conditioning. Regularly replace the air conditioning filter, as spring brings a lot of dust and willow catkins, which can accumulate on the filter and promote bacterial growth, leading to a musty smell in the air conditioning. Additionally, clean the condenser periodically, and for a thorough cleaning, remove the radiator. 3. Regularly run the air conditioning at high fan speed. The air conditioning system can accumulate a lot of dust during use. Running it at high speed periodically helps blow out loose dust from the air ducts, which is a simple way to keep the system clean. Also, use specialized duct cleaning solutions for disinfection, cleaning, and odor removal.
20
4
Share

How to Reset the Maintenance Light on Geely Emgrand GS?

For the manual transmission Geely Emgrand GS, depending on the model year and instrument configuration, there are several methods to manually reset the maintenance light: 1. First Method (1) With the ignition switch turned off, press and hold the trip reset button; (2) Insert the car key and turn it to the position where the instrument lights up, then release the trip reset button and wait for the maintenance light to turn off. 2. Second Method (1) There is a button on the dashboard for adjusting the mileage. Press and hold this button for 2-3 seconds while the engine is idling; (2) Once the maintenance reminder turns off, the maintenance reset is complete. 3. Third Method (1) Turn off the ignition switch; (2) Press and hold both arrow buttons simultaneously, then turn on the ignition switch; (3) After the ignition switch is on for about 3 seconds, release both arrow buttons; (4) The display will then show the maintenance menu, asking if you want to reset; (5) Press and hold the SET (reset) button for more than 3 seconds; (6) Press the MODE button; (7) Turn off the ignition switch to complete the reset.
4
2
Share

What are the exterior dimensions of the Land Cruiser?

The length, width, and height of the Land Cruiser are 5095/1975/1930mm respectively, with a wheelbase of 2850mm. More information about the Land Cruiser is as follows: 1. The Land Cruiser, whose full name is Land Cruiser, is an imported ORV off-road vehicle produced by Toyota. This model has a production history of over 60 years, featuring strong off-road capability and durability. 2. The Toyota Land Cruiser has multiple series models including the 20 series, 40 series, 55 long wheelbase series, 60 long wheelbase series, 70 series, 80 series, 90 series, and 100 series.
2
3
Share

Where is the cigarette lighter fuse located in the Cruze?

The cigarette lighter fuse in the Cruze is located in the engine compartment cover at the lower left corner of the driver's seat. The method for disassembling and assembling the cigarette lighter is as follows: 1. Unscrew the shell: For some vehicles, the cigarette lighter socket has a screwed-on shell at the back, which can be unscrewed by turning it counterclockwise and then reinstalled by turning it clockwise; 2. Remove screws: For some vehicles, the cigarette lighter socket is secured with screws at the back, and it can be removed by simply unscrewing the screws with a wrench; 3. Remove the panel: To remove the gear shift lever panel, simply pull one side up by hand or pry it open with a flathead screwdriver, and the entire panel can then be removed; 4. Remove panel screws: After removing the gear shift lever panel, press the cigarette lighter panel door to open it automatically, then remove it using an M4 hex wrench; 5. Remove the plastic box: Pull the cigarette lighter's plastic box out by hand. When it is pulled out about 10 cm, disconnect the connecting wires first; 6. Operate the inner and outer rings: The cigarette lighter consists of an outer ring and an inner ring. When using it, press the inner ring in. Once it reaches a certain temperature, the inner ring will automatically return to its original position. At this point, you can pull it out by pinching the outer ring.
15
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.