How many kilometers can the Baojun 310 travel on a full tank?

1 Answers
VanAubree
07/29/25 8:03pm
Baojun 310 can travel approximately 600 kilometers on a full tank. The following factors affect the vehicle's range: Fuel consumption factors: The fuel consumption of the car may also affect its range. If the car has higher fuel consumption, its range will be lower. Conversely, lower fuel consumption results in a higher range. Driver habits: The range of the car is related to the driver's driving habits. The actual driving distance varies from person to person. Road conditions: The driving range differs based on road conditions. If the car is mostly driven on highways, the range will be higher. If it is mostly driven in urban areas, fuel consumption will be higher, and the range will consequently be lower.
Was this review help?
18
5
Share
More Forum Discussions

What Causes Window Leakage?

Window leakage is generally caused by aging window waterproof strips or clogged door drainage holes. Therefore, it is necessary to check whether the window waterproof strips are aging or loose and replace them if necessary. Additionally, inspect whether the door drainage holes are blocked; if they are, they need to be cleared. Window maintenance tips: 1. Cleaning: For automatic windows, regularly clean the dust inside the window sealing strips. The rubber strip attached to the top of the window frame is designed to prevent rainwater from flowing into the car. This rubber strip is in constant contact with the window glass. If the window glass is too dirty, the friction with the rubber strip will increase, directly leading to the window's inability to open or close properly. 2. Application: Applying a maintenance agent to the rubber is very important. The rubber parts supporting both ends of the glass should be carefully inspected to ensure they are in good condition. If the sliding condition between the glass and the guide is poor, a rubber maintenance agent can be applied.
18
1
Share

Is the AE86 Front-Wheel Drive or Rear-Wheel Drive?

The AE86 adopts a front-engine, rear-wheel-drive layout, making it a rear-wheel-drive vehicle. Positioned as a sports car, the AE86 shares a sibling relationship with the Subaru BRZ. Here are key details about the AE86: 1. Exterior Design: The car retains Toyota's signature family styling. To accentuate its sporty character, the Toyota 86 offers seven color options: Ice Silver Metallic, Crystal White Pearl, Dark Gray Metallic, Quartz Black, Pure Red, Azure Blue, and Oceanic Blue. 2. Powertrain: Equipped with a 2.0L naturally aspirated horizontally opposed four-cylinder engine featuring D-4S dual injection technology, it delivers maximum power of 200 horsepower and peak torque of 205 Nm. 3. Transmission: The engine pairs with either a 6-speed manual or 6-speed automatic transmission.
3
0
Share

Is the actual range of the SAIC ER6 insufficient?

ER6's NEDC pure electric range for all models is 620 kilometers, which is considered the best in the pure electric vehicle market at the 200,000 yuan price point. Additionally, the official announcement includes a fast-charging feature that allows for 200 kilometers of driving after just 15 minutes of charging. More details about the ER6 are as follows: 1. Battery: The ER6 utilizes CATL's mature and stable NCM523 battery cells, with an energy density of 180Wh/kg, achieving performance comparable to NCM811 cells. However, unlike other automakers, SAIC only uses CATL's cells, while the battery modules and architecture are entirely developed in-house, giving it full autonomy over the overall structure. 2. Electric Drive: The ER6 is equipped with an industry-leading 8-layer Hair-pin motor with high power and high torque density. Combined with a compact and innovative coaxial layout, it integrates the best-in-class electric drive system, with power density surpassing existing products in the same category. This contributes significantly to the vehicle's extended range and provides users with a smoother, more efficient, and more energy-saving driving experience.
5
4
Share

What are the symptoms of water entering a diesel engine?

Possible symptoms of water entering the engine cylinder block include cracks in the cylinder liner, water spraying from the radiator, white smoke emitting from the exhaust pipe when the engine is running, reduced power output, and in severe cases, failure to start. Below is relevant information about the engine cylinder block: 1. The engine consists of two main parts: the cylinder block and the cylinder head, which are connected to each other by bolts. 2. The cylinder block material should have sufficient strength, good casting and machining properties, and be low-cost. Therefore, commonly used materials for cylinder blocks are cast iron and alloy cast iron. However, aluminum alloy cylinder blocks are becoming increasingly popular because they are lightweight, have excellent thermal conductivity, allow for reduced coolant capacity, quickly reach operating temperature after startup, and have the same thermal expansion coefficient as aluminum pistons. This results in minimal clearance changes when heated, reducing impact noise and oil consumption. Additionally, aluminum alloy cylinder blocks have the same thermal expansion as aluminum alloy cylinder heads, which helps reduce thermal stress caused by thermal shocks during operation.
5
5
Share

What's the deal with gasoline cars not being able to use diesel?

Diesel fuel lacks the power to start gasoline-powered vehicles. Even if it could start the engine, the car would stall after just a few steps because diesel cannot properly power a gasoline engine. The consequences of continuing to operate a gasoline car after adding diesel are as follows: 1. Carbon buildup: When diesel is added to a gasoline car and the engine is started, the insufficient pressure from the fuel injectors means the diesel can only partially atomize, entering the cylinder in liquid form. This leads to incomplete combustion, causing carbon buildup and potentially clogging the fuel injectors. 2. Engine knocking: After adding diesel to a gasoline engine, the high-pressure air-fuel mixture reaches its auto-ignition temperature before the spark plug fires, leading to violent combustion. This causes abnormal pressure in the combustion chamber, commonly known as knocking, which can damage the engine. In severe cases, it may result in cylinder scoring. 3. Immediate tank cleaning required: If the wrong fuel is added but discovered before starting the engine, immediately call for a tow truck to take the vehicle to a repair shop to drain and clean the fuel tank.
12
4
Share

What changes occur after converting the Haval H6 to CNG?

After converting the Haval H6 to CNG, there will be a noticeable decrease in power. Here are the specific details: 1. Configuration: The H6's headlights adopt an integrated LED light source for high/low beams, paired with LED daytime running lights, ensuring enhanced driving safety both day and night. The side profile features a dual waistline design, which not only appears more streamlined but also challenges the stamping process. The rear design is very rounded, devoid of excessive chrome trim, giving a minimalist impression. The taillights, also full LED, echo the headlights. 2. Powertrain: The new Haval H6 is equipped with two powertrain options: a 2.0T and a 1.5T engine. The 2.0T engine delivers a maximum output of 145 kW and a peak torque of 345 Nm, while the 1.5T engine produces a maximum power of 124 kW and a peak torque of 285 Nm. Both powertrains are paired with a 7-speed wet dual-clutch transmission.
20
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.