How Many Kilometers Can Four Bars of Fuel Last?

2 Answers
DelEloise
07/30/25 12:37am
One bar equals 2.5 liters, so four bars equal 10 liters of fuel. In city driving with heavy traffic, assuming 10 liters per 100 kilometers, theoretically it can last 100 kilometers; in suburban driving with 8 liters per 100 kilometers, it can last 125 kilometers; on highways with 7 liters per 100 kilometers, it can last 143 kilometers. Relevant information about vehicle range is as follows: 1. Introduction: Vehicle range refers to the maximum distance that can be traveled with the remaining fuel in the tank at a fuel-efficient speed, mainly calculated by the car's computer based on the current fuel consumption. 2. Influencing Factors: The vehicle's range is affected by four factors: charging equipment, tire pressure, whether the vehicle overtakes, and whether it frequently makes sudden stops and starts.
Was this review help?
9
0
Share
CaliLynn
08/15/25 5:34am
As a frequent driver, I find it really hard to estimate how far four bars of fuel can take me. My car has a 50-liter fuel tank with an eight-bar gauge, each representing about 12.5% of the tank. Four bars mean 25% fuel left, roughly 12.5 liters. My average fuel consumption is 12L per 100 km in the city and 7L on the highway. On the highway, 12.5 liters can cover about 178 km, but in heavy city traffic, it's only around 104 km. Actual mileage also depends on driving habits: rapid acceleration, frequent braking, using AC, or carrying heavy loads all increase fuel consumption. I always refer to the remaining mileage display in my car, but don’t rely on it completely, as road conditions vary. I recommend developing a habit of noting the mileage when refueling to calculate real fuel consumption and avoid running out of fuel. For safety, it's best to find a gas station when the fuel drops below four bars.
Was this review help?
5
1
Share
Expand All
More Forum Discussions

What to Do When the Car is Too Close to the Left Side?

Straighten back a little, then drive forward to the right a bit, and straighten back again. Repeating this two or three times should do the trick. Depending on the size of the space, if you realize it's not suitable right after entering, you can try reversing out the same way and then re-entering. If the car isn't too close, you can make slight adjustments. If it's extremely close, you'll need to be very careful and move out bit by bit.
15
4
Share

How to adjust the low beam height of the 2021 Malibu XL?

Enter the driver's cabin and you can see the headlight height adjustment knob on the left side of the dashboard. Adjust according to the headlight height levels marked on the knob. When the highest light position is needed, turn the knob to the "0" position. To lower the light by one level, rotate the knob to the "1" position. The "2" position provides a relatively low light height. When the lowest light position is required, turn the knob to the "3" position.
6
2
Share

How to Deal with Speeding?

If the speed exceeds the speed limit by less than 10%, a warning will be issued. On roads with a speed limit below 50 km/h, if the speed exceeds the speed limit by 10% or more but less than 20%, a fine will be imposed. If the speed exceeds the speed limit by 20% or more but less than 50%, by 50% or more but less than 70%, or by 70% or more, a fine will be imposed. On roads with a speed limit between 50 km/h and 80 km/h, if the speed exceeds the speed limit by 10% or more but less than 20%, a fine will be imposed. If the speed exceeds the speed limit by 20% or more but less than 50%, by 50% or more but less than 70%, or by 70% or more, a fine will be imposed.
19
3
Share

How to Turn on the High Beam on a Mercedes-Benz?

There are two methods to turn on the high beam: The first method is to pull the left-hand stalk toward the driver to activate the high beam. Releasing the stalk will automatically reset it and turn off the high beam. The second method is to push the stalk away from the driver, which will keep the high beam on continuously. Below is an introduction to the high beam: 1. Vehicle lights adjust the intensity of light based on the distance of the filament: The high beam is focused at its focal point, emitting light that travels parallel, is more concentrated, and brighter, allowing it to illuminate distant and high objects. The low beam is positioned beyond its focal point (between 1x and 2x the focal length), emitting light in a divergent pattern to illuminate a larger area of nearby objects. 2. The difference between high beam and low beam: Both are used for nighttime illumination, but the high beam has a higher angle and longer range, while the low beam has a lower angle and shorter range. 3. It is generally advisable not to use the high beam when driving in the city: Urban areas typically have good lighting conditions. The high beam's elevated angle can easily dazzle oncoming drivers and pedestrians, impairing their vision and posing safety risks, as well as being considered impolite driving behavior. 4. Alternately switching the high beam on and off at night can serve as a substitute for the horn to alert nearby pedestrians and vehicles: This helps avoid excessive noise. On highways or in rural areas without streetlights, using the high beam can expand the field of vision. However, when encountering oncoming traffic, it is recommended to switch to the low beam for safety and courtesy considerations.
3
5
Share

How to activate one-touch window lift for the 2021 Excelle?

To activate the function, first start the vehicle. Press and hold the switch to lower the window completely for 5 seconds without releasing, then press and hold to raise the window to the top for 5 seconds before letting go. Once the learning process is completed, the feature will be enabled. After activating the auto-lock feature, the vehicle will automatically lock the doors while driving. This function typically activates when the speed exceeds 15 km/h. When the car is stationary, the gear lever is in position P, and the ignition is turned off, all doors and the trunk lid will automatically unlock.
16
3
Share

How to File an Insurance Claim for a Windshield Damaged by a Stone?

After the accident occurs, preserve the accident scene and immediately report the incident to the vehicle's insurance company. If the third-party loss involves road facilities or another vehicle, it is necessary to report the incident to the traffic police department. Insurance company personnel will arrive at the scene and issue an "Inspection Report," while the traffic police department will also arrive and issue an "Accident Determination Certificate" on-site.
14
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.