How many kilometers can a Toyota Levin travel on a full tank of gas?

1 Answers
LaJuniper
07/30/25 3:29am
The distance a Levin can travel on a full tank of gas depends on the specific model. Here are the parameters for different Toyota Levin models: 1. The 1.2t model can travel 900 kilometers; 2. The 1.8l model can travel 1040 kilometers. Below is an introduction to the Toyota Levin: Taking the 2021 Levin as an example, it is a compact car with the following dimensions: length 4640mm, width 1780mm, height 1455mm, wheelbase 2700mm, minimum ground clearance 105mm, and a body weight of 1350kg. The 2021 Levin is equipped with a 1.2t turbocharged engine, delivering a maximum horsepower of 116ps, maximum torque of 185nm, maximum power of 85kw, and is paired with a 10-speed continuously variable transmission.
Was this review help?
3
5
Share
More Forum Discussions

How to Adjust Car Mirrors Correctly?

Car mirror adjustment tutorial: 1. Adjust the horizon reflection in the center rearview mirror to the center of the mirror, and position the reflection of your right ear to the left edge of the mirror; 2. Adjust the horizon reflection in the side mirror to the center, with the reflection of the left side of your car occupying the right quarter of the mirror; 3. Since the driver's seat is on the left side, it's harder for the driver to see the right side of the car. Additionally, for roadside parking needs, the right side mirror should show more ground area when adjusting up and down positions, covering about two-thirds of the mirror surface; 4. For the left-right position, adjust so that the car body occupies one-quarter of the mirror surface.
9
5
Share

How to Adjust the Time on an Accord?

Tutorial for adjusting time on Accord: 1. Before adjusting the time, first locate the sound button on the air conditioning control panel; 2. After pressing the sound button, the time on the dashboard will blink, then press button 4 to adjust the hour and button 5 to adjust the minutes; 3. Once the correct time is set, press the sound button again to confirm. The Accord is a vehicle launched by GAC Honda, embodying Honda's innovative spirit and globally leading technology. Its body dimensions are 4756mm in length, 1804mm in width, and 1509mm in height, with a wheelbase of 2730mm.
13
5
Share

Where is the cruise control on the Audi A6?

Audi A6's cruise control is located at the lower left side of the steering wheel, below the turn signal. Cruise control, also known as speed control system or autonomous driving system, functions by automatically maintaining the vehicle's speed at the driver's desired setting without requiring constant pressure on the accelerator pedal, allowing the car to travel at a constant speed. The Audi A6 is a luxury vehicle produced by Audi, available in both sedan and station wagon variants. It incorporates Audi's cutting-edge proprietary technologies, further enriched with premium features and endowed with exceptional sporty characteristics, embodying luxury, dynamism, and sophistication.
19
3
Share

Which light to use when turning at a signal-controlled intersection?

When turning at a signal-controlled intersection, activate the left or right turn signal. If caught by traffic cameras without using the turn signal, the driver's license will be deducted 1 point according to regulations. Function of turn signals: As signal lights, turn signals primarily serve to alert surrounding vehicles during daily driving, indicating an upcoming turn and prompting other vehicles to yield to avoid collisions. Whenever a vehicle needs to steer away from its current lane, activating the turn signal in advance is a fundamental principle of safe driving. Precautions for using turn signals: Pay attention to traffic signals—proceed when the light is green, and be especially mindful that some intersections may have dedicated turn signals for right turns. When entering an intersection with marked turning lanes, activate the turn signal before entering the lane. Turning it on too early may give trailing vehicles the impression of a "forgotten turn signal," while turning it on too late may cause accidents due to insufficient reaction time for other drivers or pedestrians. The left turn signal should be activated in advance when making a left turn, changing lanes to the left, preparing to overtake, leaving a parking spot, or making a U-turn. The right turn signal should be activated in advance when making a right turn, changing lanes to the right, returning to the original lane after overtaking, or pulling over to park.
4
0
Share

Can You Drive with Low Car Coolant?

You should not drive with low car coolant and should replenish it promptly. The primary function of engine coolant is to maintain the operating engine within a normal temperature range, meaning it cools down the engine when it overheats. Additionally, engine coolant provides anti-freeze, anti-corrosion, and anti-scale benefits. If the engine coolant level is below the minimum mark but there is still some remaining in the reservoir, you can drive in this situation. Although the coolant level is low, there is still enough coolant circulating in the cooling system, which won't significantly impact the engine's heat dissipation. However, it is still advisable to replenish the coolant as soon as possible.
19
3
Share

Does a sedan need inspection after wading through water?

After a sedan wades through water, it needs inspection, focusing on whether the air filter is clogged, whether the exhaust pipe has water ingress, and whether the brake pads are stuck. Check if the air filter is clogged: After water enters the air filter, it can cause the air filter to clog, leading to insufficient engine air intake and resulting in weak acceleration. Remove the air filter and replace it with a new one. Check if the exhaust pipe has water ingress: If water submerges the exhaust pipe during wading, some water may remain inside, affecting engine exhaust flow and consequently reducing power. The engine power will return to normal once the exhaust expels the water. If it cannot expel the water on its own, it is necessary to visit a repair facility for cleaning. Check if the brake pads are stuck: After driving through water, the brake pads and brake discs may rust and become stuck, causing resistance during driving. If the situation is not severe, the rust can be removed by the high temperatures generated during driving. If the situation is severe, new brake pads and brake discs need to be replaced.
10
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.