How many kilometers can a sedan run before being scrapped?

1 Answers
JuneLynn
07/29/25 7:44pm
For household 5-seat sedans and 7-seat SUVs, non-commercial small and mini vehicles have no usage lifespan. When the normal mileage reaches 600,000 kilometers, the state will guide them to be scrapped. In addition to the above vehicles, small and mini non-commercial passenger vehicles, large non-commercial sedans, and wheeled special machinery vehicles also have no usage lifespan restrictions. Commercial vehicles have scrapping lifespans as follows: Small and mini taxi passenger vehicles have a scrapping lifespan of 8 years, medium taxi passenger vehicles 10 years, and large taxi passenger vehicles 12 years. Public transport passenger vehicles have a scrapping lifespan of 13 years, other small and mini commercial passenger vehicles 10 years, and large and medium commercial passenger vehicles 15 years. Mini commercial trucks have a scrapping lifespan of 8 years, light and large commercial trucks 10 years. The vehicle scrapping process is as follows: The car owner applying for scrapping and renewal must fill out an "Application Form for Vehicle Modification, Transfer, Alteration, Suspension, or Scrapping" and stamp it with the owner's seal. The registration office accepts the application and issues a "Vehicle Scrapping Notice" for vehicles that have reached the scrapping lifespan. For vehicles that have not reached the scrapping lifespan, after inspection and confirmation by the vehicle inspection office, if they meet the scrapping standards, a "Vehicle Scrapping Notice" will be issued. The owner can choose a qualified recycling company to dismantle the vehicle with the "Notice". The recycling company will dismantle the vehicle and take photos after verifying the "Notice". The engine must be separated from the vehicle, the engine block must be broken, and the frame (chassis) must be cut. The owner must submit the "Modification Form", "XX Province Vehicle Renewal Technical Appraisal Form", "Scrapped Vehicle Recycling Certificate", and photos of the dismantled vehicle to the vehicle inspection office for verification and signature. The license plates will be reclaimed, and the scrapping registration will be processed according to regulations. Special Notes: According to Article 30 of the "Motor Vehicle Registration Regulations", if the vehicle is damaged and cannot be driven back to the place of registration, the owner can sell the scrapped vehicle to a local motor vehicle recycling company. Commercial vehicles converted to non-commercial use must be scrapped according to the original commercial vehicle's scrapping time. According to Article 43 of the "Motor Vehicle Registration Regulations", after completing the transfer or cancellation of motor vehicle registration, the original owner can apply to the vehicle management office to use the original license plate number when registering a newly purchased motor vehicle. The application to use the original license plate number must meet the following conditions: (1) The application must be submitted within six months after the transfer or cancellation of registration; (2) The owner must have owned the original vehicle for more than three years.
Was this review help?
5
5
Share
More Forum Discussions

How to Transfer an Out-of-Town Driver's License to Local?

The procedure for transferring a driver's license back to your local area requires that the license must have been held for at least one year before it can be transferred, and you will need to retake the third subject test. After preparing the necessary materials: original and photocopy of ID card, original and photocopy of driver's license, recent one-inch bareheaded photo, motor vehicle driver's license application form, and physical examination form (to be filled out and tested at the vehicle management office), follow the steps below at the processing window of the vehicle management office to get a number and queue: 1. First, check if there are any traffic violations on the driver's license. 2. Go to the corresponding window to request the application form. 3. Submit the application form, physical examination report, and related materials to the staff. 4. After the staff verifies and reviews, go to the cashier to pay the fees.
11
3
Share

What is the suitable valve clearance for a scooter motorcycle?

Scooter motorcycle valve clearance is suitable at 0.05 to 0.06mm. A motorcycle is a nimble and fast means of transportation, driven by a gasoline engine, and is a two-wheeled or three-wheeled vehicle that steers the front wheel via handlebars. It is lightweight, flexible, and fast, widely used for patrolling, passenger and cargo transportation, and as sports equipment. The daily maintenance methods for motorcycles are: 1. During the break-in period, control the motorcycle's idle speed at 100 rpm; 2. Match the motorcycle's gear with the corresponding speed; 3. When braking is needed due to an obstacle ahead, release the throttle, step on the rear brake with the right foot, and lightly apply the front brake with the right hand; 4. Regularly check the spark plug; 5. When installing a new spark plug, hand-tighten it until it can't be turned anymore, then use a spark plug socket to tighten it an additional quarter to half turn; 6. Regularly lubricate the chain.
4
0
Share

Is an Appointment Required for the Changchun Subject 4 Exam?

An appointment is required for the Changchun Subject 4 exam. Below is an introduction to Subject 4: Exam content: Requirements for safe and civilized driving, safe driving skills under complex conditions, and emergency handling in critical situations. Exam format: Depending on the type of driver's license being tested, 50 questions are randomly selected from the corresponding Subject 4 question bank in proportion. For small vehicle licenses, questions are drawn from a pool of 1,240, while for large vehicle licenses, they are drawn from a pool of 1,235. Each question is worth 2 points. The exam duration is 45 minutes, and if 12 points (6 questions) are incorrect during the exam, the session is terminated. The question types include true/false questions (1-20), single-choice questions (20-40), and multiple-choice questions (41-50). Exam questions include image-based questions, scenario recognition questions, and text-based questions.
9
5
Share

Should the speed be increased to over 60 after entering the ramp?

Vehicles must accelerate to over 60 on the ramp, and then turn on the left turn signal to enter the traffic lane under the premise of ensuring safety; if there are vehicles closely following on the traffic lane, you cannot directly enter the traffic lane. Relevant introductions are as follows: Increase speed: On the ramp (when entering), quickly increase the vehicle speed, but do not exceed the speed limit indicated by the signs. On the ramp, overtaking, U-turns, parking, and reversing are not allowed. Choose the right moment: After driving the vehicle from the ramp into the highway acceleration lane, turn on the left turn signal, increase the speed to over 60 kilometers per hour as soon as possible, and carefully observe the traffic conditions on the lane to choose the right moment to enter the traffic lane.
4
3
Share

What brand of engine does Maserati use?

Maserati's entire lineup is equipped with a 4.7-liter V8 naturally aspirated engine. Here is the relevant introduction of the 2021 Maserati Ghibli: 1. The Maserati GT is a grand tourer under the Maserati brand, with body dimensions of 4974mm in length, 1945mm in width, and 1484mm in height, a wheelbase of 2998mm, a fuel tank capacity of 80 liters, and a curb weight of 2020kg. 2. The 2021 Maserati Ghibli features a double-wishbone independent front suspension and a multi-link independent rear suspension. 3. The Maserati GT is powered by a 2.0T turbocharged engine, delivering a maximum horsepower of 330PS, a maximum power of 243kW, and a maximum torque of 450Nm, paired with an 8-speed automatic transmission.
14
5
Share

What Causes the Oil Light to Illuminate When There is Sufficient Engine Oil?

The reasons for the oil light illuminating when there is sufficient engine oil are: 1. Clogged oil passages; 2. Low oil viscosity; 3. Issues with the oil pump; 4. Problems with the oil sensor; 5. Electromagnetic interference. The functions of engine oil include: 1. Lubrication and friction reduction; 2. Assisting in cooling and temperature reduction; 3. Sealing and preventing leaks; 4. Rust and corrosion prevention; 5. Shock absorption and cushioning. The steps for changing engine oil are: 1. Lift the vehicle, remove the undercarriage shield, and place a container of about 10 liters beneath the oil drain plug; 2. Unscrew the oil drain plug, use an air gun to blow for two minutes at the oil filler port, then tighten the drain plug after draining and wipe it with a tissue to check for leaks; 3. Reinstall the undercarriage shield, lower the vehicle, and use a funnel to add oil through the filler port.
18
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.