How many kilometers can a new car drive on the highway for a high-speed run?

1 Answers
McColeman
07/30/25 8:00am
New cars should avoid high-speed driving, long-distance driving, and fully loaded driving. Here are some relevant introductions about driving on the highway: 1. Introduction to highways: Highways refer to high-level speeds, compared to medium and low speeds. In an environment where low speed is the mainstream, low speed is the normal or regular speed, while in an environment where medium speed is the mainstream, medium speed is the normal or regular speed. 2. Precautions: When driving on the highway, it is necessary to maintain a safe distance from the vehicle in front. When the speed is above 100km/h, keep a distance of more than 100 meters. There are distance confirmation signs on the highway, and the distance can be confirmed through these signs. Stay away from trucks. When driving at high speed, do not drive side by side with trucks, nor follow behind them. Try to overtake them. Stay in the middle lane. The leftmost lane on the highway is the overtaking lane, and large trucks are generally in the rightmost lane.
Was this review help?
13
2
Share
More Forum Discussions

Can the motorcycle odometer be adjusted if it's inaccurate?

Motorcycle odometer can be adjusted if it's inaccurate. Precautions for motorcycle riding: Avoid racing with cars, drive safely according to traffic regulations, and yield to pedestrians. Do not follow too closely; maintain an appropriate distance by staying at the right rear corner of the vehicle in front. When overtaking, pass from the left side of the vehicle ahead; overtaking from the right or between two parallel vehicles is prohibited. Speed limits for motorcycles: On highways, motorcycles must not exceed 80 kilometers per hour. Exceeding this limit may result in penalties from traffic police. Additionally, riding without a helmet on highways will lead to being stopped and fined by the police, and carrying passengers on highways is strictly prohibited.
5
4
Share

Differences between the 488 and 488 Pista?

Here are the differences between the 488 and 488 Pista: 1. Difference one: Different horsepower. The 488's engine has 670 horsepower and a maximum torque of 760 Nm, while the 488 Pista's engine boasts 720 horsepower and 770 Nm of maximum torque. Additionally, the front section of the 488 Pista has undergone some special design, resulting in greater downforce compared to the standard 488. 2. Difference two: Different engines. Both feature a 3.9-liter twin-turbocharged V8 engine, but the 488 Pista's engine has upgraded exhaust systems, crankshaft, connecting rods, and pistons.
6
0
Share

What are the steps for testing engine cylinder pressure?

Engine cylinder pressure testing steps are: 1. Run the engine until it reaches normal operating temperature, with coolant temperature between 85-95°C. 2. Remove all spark plugs or fuel injectors, and ground the high-voltage wires. 3. Depress the accelerator pedal to fully open the throttle. 4. Press the conical rubber adapter of the cylinder pressure gauge firmly into the spark plug hole of the cylinder being tested, or screw the threaded adapter into the spark plug hole. 5. Crank the starter for 2-3 seconds, then read the stabilized gauge reading. 6. Main factors affecting engine cylinder pressure include: intake and exhaust valve wear, cylinder wear, piston ring wear, and wear between the crankshaft and connecting rods.
17
0
Share

What are the methods for detecting leaks in car air conditioning?

Methods for detecting leaks in car air conditioning include: 1. Checking for oil traces, as refrigerant and compressor oil are mutually soluble, so oil traces will appear at the leak site; 2. Soap bubble test, applying soapy water to potential leak areas, where bubbles will form if there is a leak; 3. Dye testing, adding a dye-mixed refrigerant to the system, which will leave visible colored traces at the leak site; 4. Halogen leak detector; 5. Electronic leak detector; 6. Fluorescent tracer test; 7. Water immersion test; 8. Positive pressure test; 9. Negative pressure test. Car air conditioning is an air regulation device installed in vehicles, capable of cooling, heating, ventilating, and purifying the air inside the cabin, providing a comfortable environment for passengers, reducing driver fatigue, and improving driving safety.
3
1
Share

Do I Need to Add Windshield Washer Fluid to a New Car Myself?

Generally, you need to add windshield washer fluid to a new car yourself, as it is already configured when the car leaves the factory. Cleaning Performance: Automotive windshield washer fluid is formulated with various surfactants and additives. Surfactants typically have functions such as wetting, penetrating, and solubilizing, thereby achieving the effect of cleaning and removing dirt. Anti-Freeze Performance: Automotive windshield washer fluid can significantly lower the freezing point of the liquid, thus providing an anti-freeze effect and quickly dissolving frost. Anti-Fog Performance: Windshield washer fluid can form a single-molecule protective layer on the glass surface. This protective film prevents the formation of fog droplets, ensuring the windshield remains clear and transparent, with a clear field of vision.
6
5
Share

Can a used car be transferred to a non-local person?

Used cars can be transferred to non-local individuals. The method for transferring a used car across regions is as follows: 1. Drive the vehicle directly to the transfer inspection area, where staff will conduct an inspection, take rubbings of the vehicle identification number, remove the license plates, and take photos. The vehicle photos will be obtained and pasted onto the inspection record form. 2. Upon entering the main hall, first check the vehicle information, pay the rubbing fee, and inquire about the status of any traffic violations. If any outstanding violations are found, they must be addressed at the vehicle management office. 3. At the transfer hall, present the required documents, obtain the used car sales contract, and both parties should fill out the necessary forms. After completing the forms, gather all materials and proceed to process the transfer application. 4. After obtaining a queue number, take all relevant documents and line up to pay the transfer fee.
1
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.