How many kilometers can a new car drive on the highway?

1 Answers
GrantAnn
07/30/25 4:29am
New cars usually need to run 3,000 kilometers before driving at high speeds. This is actually to remove carbon deposits in the valves, and irregular high-speed driving can reduce engine carbon deposits. Acceleration is to make the engine operate at high speeds above 4,000 RPM, using its higher atmospheric pressure to impact the accumulated colloids in the cylinder valves, which can prevent and reduce the formation of engine carbon deposits. For new cars, please follow these five requirements: First, standardize fuel usage; second, perform initial maintenance; third, start in gear; fourth, shift gears in a timely manner; fifth, control speed. Additionally, avoid the following: first, do not drive at high speeds; second, do not overload; third, do not drive long distances; fourth, do not brake harshly; fifth, do not use the car for training purposes. The break-in period for a new car is between 2,500 and 3,000 kilometers. Of course, the break-in period can also be extended based on the vehicle's condition. The better the break-in period, the better it is for the car. The latest traffic regulations stipulate that new drivers have a 12-month probationary period, during which they cannot drive alone on highways and must be accompanied by someone with over three years of driving experience. Clearly, it is relatively difficult for new drivers to drive on highways, as highway speeds are high, and there are many things to pay attention to. The requirement for new drivers to be accompanied by experienced drivers is naturally based on safety considerations. However, implementing this regulation may be somewhat challenging, and more likely, it will rely on the self-discipline of new drivers.
Was this review help?
7
3
Share
More Forum Discussions

Why can't the Toyota AE86 be driven on the road?

Toyota AE86 cannot be driven on the road for the following reasons: 1. It is an FR model (front-engine, rear-wheel drive) with excellent front-rear body balance, a 50:50 weight distribution, and a lightweight body. The original AE86 weighs only 940 kg, with the GTV lightweight version being even lighter. Some modified AE86s weigh just over 800 kg. 2. With over 200 horsepower, the AE86 holds a special position in certain races, such as downhill and drift competitions. Even today, the AE86 remains one of the popular cars for drift competitions in Japan. 3. The AE86 was born in the 1980s, but its body and suspension design are products of the 1970s. Its chassis actually originates from a small pickup truck Toyota sold in North America, with specifications similar to the Liteace. The 4A-GEU engine was not manufactured by Toyota itself but was produced by Yamaha, indicating that Toyota placed significant emphasis on cost-effectiveness when producing the AE86.
14
3
Share

Why can't the Land Rover Evoque play songs from USB?

In this case, you need to check whether the song format in the USB drive is compatible with the Evoque's audio player. The 2012 model has an iPod connection cable, which can be directly connected, and you can select IPOD when playing music. Here is some extended information about the Land Rover Evoque: 1. Body dimensions: The length, width, and height are 4355mm, 1965mm, and 1605mm respectively, with a wheelbase of 2662mm. The Land Rover Evoque is a compact SUV under the Land Rover brand and is the production version of the Land Rover LRX concept car, available in three-door and five-door versions. 2. Engine: The Land Rover Evoque is equipped with a turbocharged 2.0TSi4 engine with direct injection technology, paired with an AWF21 six-speed automatic transmission. The Land Rover Evoque features a MagneRide adaptive dynamic suspension and full-time four-wheel drive, with the Terrain Response system ensuring top-notch off-road performance.
17
2
Share

Which Turn Signal to Use When Exiting the Highway?

Highways follow the left-entry and right-exit rule. When exiting the highway, you should activate the right turn signal. Below are the relevant details: 1. Entering the Highway: On the ramp, you need to quickly accelerate when merging onto the highway, but do not exceed the speed limit indicated by signs. Overtaking, making U-turns, stopping, and reversing are prohibited on the ramp. After entering the acceleration lane from the ramp, you may or may not turn on the left turn signal, but you must quickly increase your speed to at least 60 km/h while carefully observing the traffic flow in the lanes to choose the right moment to merge into the main traffic lane. 2. Exiting the Highway: When exiting the highway, pay attention to the exit warning signs, move your vehicle from the main lane into the deceleration lane to slow down, and then enter the general road via the ramp. Remember to activate the right turn signal when exiting the highway.
11
5
Share

Where can I renew my driver's license in Licang District?

In Licang District, you can renew your driver's license at the Vehicle Management Office. Here are the relevant details: 1. Overdue renewal: If your driver's license is overdue for renewal, the following applies: If it has been expired for less than one year, you can apply for renewal at the Vehicle Management Office; if it has been expired for more than one year but less than three years, you need to pass the subject one exam before you can renew it; if it has been expired for more than three years, the license will be canceled. 2. Definition of a motor vehicle driver's license: It is a legal document issued by the management department to individuals who have learned traffic regulations and driving skills, passed the required exams, and are legally permitted to drive certain types of motor vehicles. 3. Exam subjects: These include traffic regulations and related knowledge, field driving, and road driving (including safe and civilized driving).
9
2
Share

What is the ground clearance of the Audi Q2L?

The ground clearance of the Audi Q2L is 142 millimeters. Here is more information about the chassis of this vehicle: 1. The suspension setup consists of a front MacPherson strut independent suspension and a rear multi-link independent suspension, which is consistent with the Audi A3 that also uses the MQB platform. 2. The chassis is composed of four parts: the transmission system, the running gear, the steering system, and the braking system. It supports and mounts the car's engine and its various components and assemblies, forming the overall shape of the vehicle, bearing the engine's power, and ensuring normal operation. 3. Since the chassis is constantly exposed to very harsh working conditions, it suffers significant damage and corrosion. When driving in the rain, the chassis comes into direct contact with water; in snowy conditions, it directly interacts with cold snow; and on rough mountain roads, the chassis is subjected to the torment of gravel and other harsh environments. These special road conditions can cause considerable damage to the chassis. Therefore, regularly checking the chassis for rust is one of the essential measures to effectively protect it.
8
5
Share

What is the appropriate tire pressure for entering Tibet?

There is no need for any special gas; regular air will suffice. The normal tire pressure for cars generally ranges between 2.2 and 2.5 bar. However, car tire pressure is not fixed and should be adjusted appropriately based on factors such as season, load capacity, and driving routes. Standard tire pressure can usually be found in the following places: the vehicle's user manual, the label near the driver's door (close to the B-pillar), or the drawer next to the driver's seat. Additional relevant information is as follows: 1. Overinflated tires: This reduces the contact area between the tire and the ground, leading to a significant increase in pressure and wear per unit area. It can easily result in loss of braking control, blowouts when encountering bumps or potholes, damage to the vehicle's suspension system, and discomfort during rides. 2. Underinflated tires: This increases the contact area between the tire and the ground, causing abnormal temperature rises inside the tire while driving. Additionally, severe deformation of the tire sidewalls accelerates the aging of the steel cord layers, increasing the risk of blowouts, higher fuel consumption, and reduced tire lifespan.
10
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.