How Many Kilometers Can a Motorcycle Travel on 1 Liter of Gasoline?

Should I Drive at High Speed First or Get the First Maintenance First?

Drive at high speed before the first maintenance. The break-in period for a new car is generally around 2,000 kilometers. Under normal circumstances, it is necessary to drive at high speed to allow the engine to fully operate, usually not exceeding two-thirds of the maximum speed, and maintain a steady speed for more than 10 minutes before coasting in neutral until the car stops. Before getting the first maintenance, pay attention to the following points: 1. Make an appointment in advance: It is best to make an appointment with the 4S shop first, otherwise, you might encounter situations where there are no available service bays or long waiting times. 2. Bring necessary documents: When going for the first maintenance, bring essential items such as the maintenance manual and vehicle registration. If unsure about which documents to bring, clarify this when making the appointment. 3. Record issues promptly: If you encounter any faults or questions while driving, note them down and inform the staff during the first maintenance registration so that the technician can inspect all issues during the first maintenance.

7

1

Share

What are the reasons for the weak air conditioning airflow in Geely Emgrand?

The reasons for the weak air conditioning airflow in Geely Emgrand are as follows: Airflow direction selection issue: Check if the car's air conditioning airflow direction is incorrectly set. If the airflow is directed towards the front windshield or side windows, it may feel like the airflow entering the cabin is weak. Blower motor malfunction: A faulty blower motor can result in reduced airflow from the air conditioning vents. If the blower motor experiences a short circuit or power loss, the air volume delivered by the car's air conditioning system will naturally decrease. If the issue lies with the blower motor, it is recommended to have it inspected and repaired by a professional service center, as this is not a problem that can be fixed by the owner. Air filter problem: A dirty air filter can obstruct the airflow from the air conditioning system. The air filter is designed to remove impurities from the air entering the cabin. If too many impurities accumulate, it will affect the airflow volume from the vents.

16

3

Share

Is the production capacity of BYD Qin Plus DMI high?

The production capacity is relatively low. The BYD Qin Plus will be officially launched on March 8th as a key model introduced in 2021. This new vehicle, equipped with the latest DMi "Super Hybrid" technology, has garnered significant market attention, with pre-sale orders reaching as high as 600,000 units in January. Relevant information about BYD is as follows: 1. Introduction: BYD is a Chinese automotive brand established in 1995, primarily producing commercial and household vehicles as well as batteries. Starting with a team of just over 20 people, BYD grew to become the world's second-largest rechargeable battery manufacturer by 2003 and established BYD Auto in the same year. 2. Logo Meaning: The new BYD logo will no longer use the original blue and white color scheme. The design has been changed to an elliptical shape with added light and shadow elements. Both the font arrangement and graphic colors have undergone significant changes, highlighting BYD Auto's innovation, technology, and corporate culture essence, infusing the BYD brand with new meaning and vitality.

14

0

Share

What is the reason for the high tire pressure in new cars when they leave the factory?

The reason for the high tire pressure in new cars when they leave the factory is to facilitate transportation and storage. The method to check the tire date on a new car is by looking at the production batch number on the outer edge of the tire. The production batch number is a set of numbers and letters that indicate the manufacturing year, month, and quantity of the tire. The functions of tires are: 1. To support the entire weight of the vehicle, bear the load of the car, and transmit forces and moments in other directions; 2. To work together with the car suspension to mitigate the shocks encountered during driving. Precautions for using a new car include: 1. Before starting a new car, it is necessary to warm it up first to give the engine a lubrication period, which is beneficial for both the car's motor and engine; 2. There are speed requirements for new cars during the break-in period, with domestic cars at 40 to 70 kilometers per hour and imported cars at 100 kilometers per hour.

18

5

Share

Does the Baojun 560 have a trailer hook at the rear?

Baojun 560 has a trailer hook at the rear, located between the exhaust pipe and the left fog light. Definition of a trailer hook: As the name suggests, it is used to tow vehicles. Trailer hooks can be installed at the front or rear of the car. Generally, SUVs, trucks, and pickup trucks install trailer hooks at the rear for towing other vehicles. However, not all vehicles can be equipped with trailer hooks; only models that comply with regulations can install them. Moreover, when installing a trailer hook, it must not protrude beyond the body of the vehicle; otherwise, it is not allowed. Illegal installation can result in fines. Classification of trailer hooks: Trailer hooks are divided into two types: exposed and hidden. Exposed trailer hooks are mostly located at the lower edge of the front and rear bumpers, commonly found in hardcore off-road vehicles. Hidden trailer hooks are often designed as split types, with the threaded hole for towing hidden in the body, while the hook is usually in the toolbox, commonly seen in sedans and SUVs.

10

4

Share

What is the fuel consumption of the Honda INSPIRE?

INSPIRE Sharp·Hybrid 2.0L is equipped with a naturally aspirated engine, and its power type is hybrid. The comprehensive fuel consumption under working conditions is 4.2-4.4L/100km; INSPIRE Sharp·Turbo 1.5L is equipped with a turbocharged engine, and its power type is gasoline engine. The comprehensive fuel consumption under working conditions is 6L/100km, urban working condition fuel consumption is 7.4L/100km, and suburban working condition fuel consumption is 5.1L/100km. Factors affecting fuel consumption: 1. Environmental factors: Low temperatures cause the car to spend more time warming up the engine, leading to higher fuel consumption; 2. Road driving conditions: Road conditions, slope size, sharpness of curves, and whether driving in urban or suburban areas also affect fuel consumption; 3. Number of passengers or weight of cargo: This has a significant impact on the car's fuel consumption; 4. Air conditioning: Turning on the air conditioning also increases fuel consumption; 5. Tires and tire pressure: Higher assistance leads to greater fuel consumption.

16

1

Share

How Many Kilometers Can a Motorcycle Travel on 1 Liter of Gasoline?

Should I Drive at High Speed First or Get the First Maintenance First?

What are the reasons for the weak air conditioning airflow in Geely Emgrand?

Is the production capacity of BYD Qin Plus DMI high?

What is the reason for the high tire pressure in new cars when they leave the factory?

Does the Baojun 560 have a trailer hook at the rear?

What is the fuel consumption of the Honda INSPIRE?

Is the Emgrand GS engine equipped with a belt or chain?

What is the fuel consumption of the Shanghai Volkswagen Lavida?

What is the method for testing engine cylinder pressure?

Is It Okay to Buy a Used Car?