How many kilometers can a motorcycle travel in one hour at 60 mph?

Can I Add 95 Octane Gasoline Before the 92 Octane is Completely Burned?

You should not add 95 octane gasoline before the 92 octane is completely burned. Here are the hazards of mixing different grades of gasoline: Abnormal exhaust pipe smoke: This may manifest as black smoke or blue smoke. After mixing, the gasoline may become thinner, making it easier to ignite in the cylinder, causing the engine to emit blue smoke. Mixing may also lead to poor cylinder sealing, resulting in black smoke from the engine. Accelerated sludge formation: Some sludge exists in the form of solid particles, which may accelerate engine wear or clog the oil filter and oil passages. This can lead to poor oil circulation and cause serious consequences. Discoloration of pistons: Mixed gasoline may alter its sealing properties, causing discoloration or damage to the piston rods or piston rings. Long-term use may severely wear the piston rods or piston rings, affecting the engine's lifespan.

19

1

Share

Should You Release the Handbrake or Shift Gears First in an Automatic Car?

In an automatic car, you should shift gears first and then release the handbrake. Below is the sequence for shifting gears and operating the handbrake in different situations: When starting: You should shift gears first and then release the handbrake, mainly for safety reasons. When starting, if the ground is sloped, releasing the handbrake first will leave the car in a neutral coasting state. At this point, the vehicle may roll in the direction of the slope without any braking, which can easily lead to a safety accident. When parking: The sequence when parking is the opposite of when starting. You should first engage the handbrake and then shift to neutral to ensure the vehicle does not move as much as possible. This is because many people are accustomed to releasing the clutch and brake after shifting to neutral. If the gear is not correctly shifted to neutral or the parking spot is on a slope, the vehicle may move. However, for automatic cars, you can directly shift to P (Park) and then engage the handbrake when parking.

1

2

Share

Does touching the line with the car body count as a failure in Subject 2?

Touching the line with the car body means the car body crosses the line. In the Subject 2 driving test, crossing the line with the car body results in a deduction of 100 points, making the test unsuccessful. In addition to crossing the line with the car body, other actions that deduct 100 points include failing to park properly in reverse, stopping midway, not following the prescribed route or sequence, and exceeding the allotted time. The full score for Subject 2 is 100 points, with evaluation criteria set for failure, deductions of 20 points, 10 points, and 5 points. The test is considered passed under the following conditions: ① For applicants of large passenger vehicles, trailers, city buses, medium-sized passenger vehicles, and large trucks, a score of 90 or above is required; ② For other vehicle types, a score of 80 or above is required. If a candidate fails the Subject 2 test, they are allowed one retake on the spot. If they choose not to retake or fail the retake, the test is terminated, and the applicant must reschedule the test after ten days. Within the validity period of the driving skill test permit, the number of rescheduling attempts for Subject 2 and Subject 3 road driving skill tests must not exceed five. If the fifth attempt is still unsuccessful, the results of any previously passed subjects will be invalidated.

14

2

Share

What is the Rear Suspension of a Car?

The rear suspension system of a car refers to all the force-transmitting connecting devices between the frame (or load-bearing body) and the axle (or wheels). It is one of the important parameters affecting the comfort of a car. The following is an introduction to the rear suspension of a car: Introduction to Car Suspension: The car suspension includes three parts: elastic elements, shock absorbers, and force-transmitting devices. These three parts respectively play the roles of buffering, vibration damping, and force transmission. For passenger cars, the elastic elements mostly refer to coil springs, which only bear vertical loads, cushion and suppress the impact of uneven road surfaces on the car body. They have the advantages of small space occupation, light weight, and no need for lubrication. However, since they have no friction themselves, they do not have a vibration damping effect. Introduction to Shock Absorbers: Shock absorbers refer to hydraulic shock absorbers, which are designed to accelerate the attenuation of body vibrations. They are the most precise and complex mechanical components in the suspension system. The force-transmitting devices refer to components such as the upper and lower control arms of the frame, steering knuckles, etc., which are used to transmit longitudinal forces, lateral forces, and moments, and ensure that the wheels have a certain relative motion law relative to the frame (or body).

5

Share

Can the Cruze PCV valve be replaced separately?

The PCV valve on the Cruze cannot be replaced separately as it is an integrated component that cannot be disassembled. If replacement is needed, the entire unit must be replaced. The PCV valve, also known as the oil separator or pressure control valve, is installed between the compressor outlet and the condenser inlet. Its separation function improves heat transfer efficiency in both the condenser and evaporator. Taking the Cruze 2018 Hatchback 320 Manual Pioneer Edition as an example: it is a compact 5-door, 5-seat hatchback under SAIC-GM Chevrolet, with dimensions of 4450mm in length, 1807mm in width, and 1459mm in height, a wheelbase of 2700mm, a top speed of 185 km/h, and equipped with a 6-speed manual transmission.

19

5

Share

Has the Nation Abolished the Biannual Vehicle Inspection?

Vehicle biannual inspections have not been abolished. Below are the specific details regarding annual vehicle inspections for different types of vehicles: Vehicles older than 6 years but less than 10 years: For non-operational small and mini passenger vehicles (excluding minivans) older than 6 years but less than 10 years, the inspection cycle has been relaxed from once a year to once every two years. This means private cars within 10 years only require two on-site inspections, at the 6th and 8th years. The annual inspection for vehicles aged 6-10 years has been abolished, adjusted to once every two years. Vehicles older than 15 years: Vehicles aged 15 years or older require inspections every six months. 7-9 seater vehicles: Non-operational small and mini passenger vehicles with 7-9 seats (excluding minivans) also enjoy a 6-year exemption from inspections, meaning they are inspected once every two years.

19

1

Share

How many kilometers can a motorcycle travel in one hour at 60 mph?

Can I Add 95 Octane Gasoline Before the 92 Octane is Completely Burned?

Should You Release the Handbrake or Shift Gears First in an Automatic Car?

Does touching the line with the car body count as a failure in Subject 2?

What is the Rear Suspension of a Car?

Can the Cruze PCV valve be replaced separately?

Has the Nation Abolished the Biannual Vehicle Inspection?

What is the general height of an SUV?

What is the displacement of the 320t engine?

What are the effects of a faulty purge pump?

What does a triangle with an exclamation mark in a vehicle mean?