How many kilometers can a Malibu XL run on a full tank of gas?

3 Answers
MacIsabela
09/01/25 7:09am
The Malibu XL can travel approximately 600km on a full tank of gas, but this distance may vary as each driver's habits and road conditions differ. Overall, the Malibu's fuel consumption is not particularly high. Additional information: 1. Chevrolet Malibu XL: For the Chevrolet Malibu XL, driving normally with a full tank of gas can typically cover around 600km without issues, though actual performance depends on the vehicle's usage. 2. Fuel consumption: The Chevrolet Malibu 2.0t model has a combined fuel consumption of about 8-9 liters per 100km. Generally, with a full tank and an average consumption of around 8 liters per 100km, it can travel about 600km, though individual driving conditions may vary.
Was this review help?
2
3
Share
SpencerLee
09/14/25 2:58am
When driving the Malibu XL, I often get around 800 kilometers on a full tank, especially on the highway, where the average fuel consumption is just over 7 liters per 100 kilometers, allowing me to drive for 10 hours straight without refueling. I remember last year's road trip from Shanghai to Wuhan—I filled up the tank and drove the entire 600-plus kilometers with plenty of fuel to spare. However, in city traffic, fuel consumption spikes, reaching up to 10L/100km, reducing the range to just 600 kilometers on short trips. Factors like air resistance, vehicle weight, and passenger load also affect mileage. I recommend regularly checking tire pressure, avoiding aggressive acceleration, and adopting smooth driving habits to save fuel. Overall, its range is quite reliable, making it suitable for long trips or daily commutes, though results may vary depending on driving conditions.
Was this review help?
8
5
Share
Expand All
PresleyLynn
10/28/25 3:41am
As someone accustomed to analyzing engine data, I know the Malibu XL has a fuel tank capacity of approximately 65 liters, with an engine that features optimized fuel injection technology. Its combined fuel consumption averages 8-9L/100km, dropping to around 6.5L on highways and potentially reaching 10L in city driving. Theoretically, a full tank can cover 700-1000 kilometers, but actual driving habits and road conditions are crucial factors: aggressive acceleration, frequent braking, or excessive load can increase fuel consumption, while cold starts and air conditioning also consume additional fuel. For greater accuracy, I would recommend using an OBD tool to record real-time fuel consumption data to optimize trips. This approach not only extends the driving range but also enhances overall vehicle maintenance.
Was this review help?
10
3
Share
Expand All
More Forum Discussions

What is the normal value for car battery testing?

It is normal for a car battery test to show a lifespan above 40%, but it also needs to be judged based on the age of the battery. The lifespan of a car battery is typically around 3-5 years, and when it reaches this period, replacement should be considered. The following are methods for battery maintenance: Timely charging: When the ammeter pointer shows insufficient power, charge the battery promptly. Use special replenishing fluid when the battery is low: When the electrolyte is insufficient, add distilled water or a special fluid. Do not use drinking purified water as a substitute, as it contains various trace elements that can adversely affect the battery.
9
4
Share

Does a motor vehicle receive penalty points for violating a prohibition sign?

Yes, penalty points are given. If you see a prohibition sign while driving and still enter the area inside the outer ring road, it is called violating the instructions of the prohibition sign, resulting in a deduction of 3 points. Introduction to prohibition signs: Prohibition signs are signs that prohibit or restrict the traffic behavior of vehicles and pedestrians. Their shape is usually circular, with some being octagonal or equilateral triangles with the vertex pointing downward. Their color is usually white background, red circle, red diagonal bar, and black pattern. Function of prohibition signs: The sign prohibiting motor vehicle entry is one of the no-entry signs, indicating that all types of motor vehicles are prohibited from entering. This sign is placed at the entrance of the road section where motor vehicle traffic is prohibited.
19
3
Share

Can I Deduct Another 6 Points After Having 6 Points Deducted Through Traffic Law Study?

After having 6 points deducted through traffic law study, you cannot obtain additional point deductions through this method. Relevant regulations: According to the rules of point deduction through traffic law study, drivers can accumulate a maximum deduction of 6 points in the current scoring cycle. After deducting 6 points, you must wait until the next scoring cycle to reapply. Accumulating 12 points: According to platform rules, if a driver has two or more full-point records in the current or previous scoring cycle, or has accumulated 12 points, they cannot apply for point deduction through traffic law study. If a driver deducts 6 points through traffic law study and then gets another 6 points deducted, they cannot apply again in the next scoring cycle.
20
0
Share

What are the symptoms of a faulty clutch pump?

It may cause the clutch pedal to not disengage properly or become excessively heavy when pressed, especially during gear shifting. You may experience difficulty in shifting gears, incomplete disengagement, and occasional oil leakage from the slave cylinder. Once the clutch slave cylinder fails, it will most likely require replacement of the entire assembly. Introduction to the clutch pump: The clutch master cylinder and slave cylinder function as two hydraulic cylinders. Working principle of the clutch pump: The master cylinder has two oil pipes, while the slave cylinder has only one. When the clutch pedal is depressed, pressure from the master cylinder is transmitted to the slave cylinder, which then activates. The release fork separates the clutch pressure plate and disc from the flywheel, allowing gear shifting to occur. When the clutch pedal is released, the slave cylinder stops working, allowing the clutch pressure plate and disc to re-engage with the flywheel, thus continuing power transmission. The oil in the slave cylinder then flows back into the reservoir.
4
2
Share

Will Lead-Acid Batteries Reduce Mileage in Winter?

Lead-acid batteries will reduce mileage in winter. Lower temperatures in winter can affect the driving range, but the exact amount of mileage reduction depends on factors such as temperature and usage habits. Below are the relationship between range and temperature and the reasons for the range reduction: Relationship between range and temperature: Generally, for every degree drop in temperature, the battery's capacity decreases by about 1%, leading to a corresponding reduction in range. The specific mileage reduction can be calculated based on the data displayed by the vehicle's onboard computer. Reasons for reduced range in low temperatures: The lower the temperature, the harder it is for the electrolyte in the battery to diffuse, and the slower the chemical reaction rate of the active materials at both electrodes becomes, resulting in a drop in battery voltage.
17
0
Share

What is the correct procedure for jump-starting a car?

The correct procedure for jump-starting a car is: Park both vehicles facing each other and prepare two jumper cables. Open the hoods and connect the positive and negative terminals of both car batteries using the jumper cables—red to positive and black to negative. Start the rescue vehicle and let its engine idle. Attempt to start the stalled vehicle. If the battery is dead, the car should start quickly, and the alternator will begin charging the battery. Precautions for jump-starting: Before connecting the cables, ensure the engine is turned off. Follow the connection steps strictly: connect the positive terminal first, then the negative, and ensure the positive and negative terminals of both cars do not touch. The disconnection sequence is the reverse of the connection sequence—remove the negative cable first, then the positive. When purchasing jumper cables, choose genuine, quality-assured products. Opt for cables with an outer diameter of at least 10mm and a length of around 3 meters.
17
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.