How many kilometers can a Lynk & Co 03 travel on a full tank of gas?

3 Answers
OJackson
07/24/25 1:19pm
Lynk & Co 03 has a fuel consumption of 10.2 liters per 100 kilometers. Below is an introduction to the Lynk & Co 03: 1. Model: The Lynk & Co 03 is a high-performance car under the Lynk & Co brand. 2. Body dimensions: The car has a wheelbase of 2730mm, with length, width, and height measuring 4677mm, 1840mm, and 1461mm respectively. 3. Engine: The Lynk & Co 03 is equipped with a 2.0-liter turbocharged engine. Here is additional information on how to use the rearview mirror heating function: 1. Locate the button: Find the control area for the air conditioning, where there are two knobs on each side, each with a button underneath. 2. Press the switch: The button under the right knob is the defogging symbol for the rear windshield, which also serves as the rearview mirror heating switch. Press this button to activate the function.
Was this review help?
20
2
Share
DelBrandon
08/10/25 6:37am
The driving range of a full tank of fuel in the Lynk & Co 03 depends on the specific model and driving habits. This car comes with 1.5T and 2.0T versions, with a fuel tank capacity of around 50 liters. According to official data, the 1.5T model has a combined fuel consumption of 5 to 6 liters per 100 kilometers, while the 2.0T version is slightly higher at 7 to 8 liters. Calculated under ideal urban road conditions, the 1.5T version can travel over 800 kilometers on a full tank, and the 2.0T version can exceed 600 kilometers on the highway with steady driving. However, in real-world driving, frequent traffic jams or aggressive acceleration can cause fuel consumption to spike, potentially reducing the range to around 500 kilometers. I recommend regularly checking tire pressure and engine oil to maintain fuel efficiency. Use the economy mode while driving, avoid sudden acceleration, and avoid overloading the car with unnecessary items. Overall, the Lynk & Co 03 is designed for balance and offers good fuel efficiency, easily handling a week of daily commuting without refueling.
Was this review help?
17
0
Share
Expand All
MacMaria
09/25/25 5:58am
The range of the Lynk & Co 03 is affected by various factors. Based on my personal tests, a full tank typically provides a range between 500 to 800 kilometers. If you're stuck in city traffic with the air conditioning on daily, the range might drop to just over 450 kilometers. On long highway trips maintaining a steady speed, it easily exceeds 700 kilometers. There's a notable difference between models—the 1.5T version is more fuel-efficient, averaging around 6 liters per 100 kilometers, while the sportier 2.0T version consumes about 7.5 liters. Don't forget regular maintenance; a dirty air filter can increase fuel consumption. Personally, I find the car's fuel system quite reliable, with well-optimized electronic controls that, combined with moderate driving, can extend the range by an extra 100 kilometers. For long trips, carrying a spare can of fuel is an option, though usually unnecessary. All things considered, a new car achieving 600 kilometers is quite common.
Was this review help?
11
2
Share
Expand All
More Forum Discussions

What are the three types of routine vehicle maintenance?

Vehicle maintenance is divided into three types: primary maintenance, secondary maintenance, and tertiary maintenance. The purpose is to restore the vehicle's performance to its optimal condition, prevent minor issues from becoming major problems, ensure the vehicle's safety, and achieve better fuel efficiency and a longer service life. Primary maintenance focuses on tightening and lubrication, addressing certain weak points that may appear after the vehicle has traveled a certain mileage. This ensures the vehicle continues to meet the technical conditions for normal operation. The main tasks include tightening connecting parts, lubricating major components, and making necessary adjustments based on visual inspections. Secondary maintenance centers on inspection, adjustment, and lubrication, providing a more thorough and detailed comprehensive check and adjustment of the vehicle. The goal is to maintain the vehicle's good operational performance over a longer period. Key tasks include inspecting the condition of components, addressing any identified faults or potential issues, making necessary adjustments, and implementing seasonal measures (such as changing lubricants and addressing cooling or heating needs). Tertiary maintenance focuses on disassembling, cleaning, inspecting, adjusting, and eliminating potential issues within assemblies. It involves a deeper and more thorough consolidation of the vehicle's normal operational performance, ensuring the vehicle operates normally between two tertiary maintenance intervals.
2
0
Share

What do the symbols on the car dashboard mean?

The icons on the car dashboard refer to: 1. Routine indicator lights: Common ones include high/low beam indicator, seatbelt reminder, turn signal light, and parking brake indicator. Their function is to remind the driver of the status of various vehicle functions. 2. Warning indicator lights: Common ones include fuel indicator, engine oil indicator, and coolant indicator. Their purpose is to inform the driver about the vehicle's condition, usually indicating the fluid levels. 3. Fault indicator lights: Common ones include bulb failure indicator, cruise control indicator, gear shift indicator, and brake pad wear indicator. They are used to alert the driver about current vehicle malfunctions. When these indicators appear, the vehicle should be inspected at a repair shop promptly.
14
3
Share

What is the difference between a 260 and 240 speedometer in cars?

The differences between a 260 and 240 speedometer in cars are as follows: 1. Different maximum speeds: A car with a 240 speedometer has a maximum speed of 240 km/h, while a car with a 260 speedometer has a maximum speed of 260 km/h. The maximum speed of a car is one of the indicators used to measure its power performance, which is ultimately determined by the engine's power. 2. Different vehicles: Generally, most ordinary family cars have speedometers marked up to 220 or 240 km/h; cars with 260 km/h speedometers are mostly B-segment cars, such as the Magotan and Mercedes-Benz series. Here is some relevant information: 1. Determining factors: How fast a car can go depends on one hand on the manufacturer's electronic speed limiter program, and another important aspect is the car's design. If a car cannot withstand a speed of 260 km/h, even if the maximum number on the speedometer is 260, the car will not be able to reach that speed. 2. Speedometer base: The maximum scale on a car's speedometer is called the "speedometer base." Generally, the maximum speed indicated on a car's speedometer is based on the highest possible speed value at the engine's no-load maximum RPM. Therefore, cars with higher speedometer base values are often perceived as having better performance.
13
4
Share

What Causes Intermittent Cooling in Car Air Conditioning?

Car air conditioning intermittent cooling failure reasons are as follows: 1. Excessive refrigerant: Too much refrigerant can cause system pressure to frequently exceed the normal upper limit, triggering pressure protection and shutting off the air conditioning. 2. Poor condenser heat dissipation, leading to high pressure. 3. Evaporator: The evaporator temperature is too low, causing the system to automatically shut off the air conditioning. 4. Freezing: Freezing of the evaporator or expansion valve results in high pressure. Ice can block the air duct, preventing cold air from being blown out. 5. Low system pressure. 6. Poor contact in control circuits. 7. Adjustment of the air conditioning pressure plate gap.
2
1
Share

What are the intelligent connected vehicles?

Currently, intelligent connected vehicles represent the major trend of automotive and transportation intelligence and smart technology, with most automakers actively entering the era of intelligent vehicle networking. Below is a detailed introduction to the brands of intelligent connected vehicles: 1. National Team: Changan Automobile, FAW, Dongfeng Motor. 2. Domestic Brands: Great Wall Motors, BYD Auto, Zhonghua Auto, XPeng, NIO, Roewe, Geely Auto. 3. Imported Brands: Mercedes-Benz, BMW, Audi, Tesla, Ford, BMW X3, Infiniti, Chevrolet, and other vehicle brands.
15
2
Share

What brand is mattoon brake pads?

mattoon is the brake pad brand of the American brand Matton. Below are the replacement criteria for brake pads: 1. Mileage: Under normal driving conditions, the front brake pads should be replaced approximately every 30,000 to 50,000 kilometers, and the rear brake pads should be replaced every 60,000 to 100,000 kilometers. Once the brake pads are found to be severely worn, they should be replaced promptly. 2. Wear degree: Generally, new brake pads have a thickness of about 1.5 centimeters. If they wear down to one-third of their original thickness, it is recommended to replace them when the thickness is less than 5 millimeters; if a metal friction sound is heard when braking, this may indicate that the brake pads have worn down to the minimum thickness, and the limit indicators on both sides of the brake pads are touching and rubbing against the brake disc, producing abnormal noises, requiring immediate replacement; if the brake pedal feels lighter when pressed, or if braking feels laborious and the car cannot stop effectively, this indicates that the brake pads are severely worn and the thickness is insufficient, also necessitating prompt replacement.
18
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.