How many kilometers can a Honda Accord travel on a full tank of gas?

1 Answers
McWeston
07/30/25 2:57am
Honda Accord's fuel consumption is: 7.6-8.8L/km, and the fuel tank capacity is: 65L. A full tank can approximately travel 860 kilometers. The Accord is a brand under GAC Honda, featuring direct injection, Atkinson cycle with VTC (Variable Timing Control), and incorporates an EGR (Exhaust Gas Recirculation) system. It utilizes i-VTEC and an intelligent power management system that can automatically switch between 3-cylinder and 6-cylinder operation modes based on actual road conditions. Methods to improve fuel efficiency are as follows: 1. Maintain a steady speed: Control your speed while driving and avoid sudden braking; 2. Avoid opening windows at high speeds: Driving with windows open at higher speeds increases fuel consumption; 3. Regularly check tire pressure to ensure correct inflation: Both under-inflated and over-inflated tires can increase fuel consumption, so it's necessary to check tire pressure regularly; 4. Pay attention to transmission maintenance: Always use the correct transmission fluid specified for your vehicle. Transmission fluid not only lubricates but also plays a role in torque transmission, so it should be replaced periodically.
Was this review help?
12
4
Share
More Forum Discussions

Can a Manual Transmission Converted to Automatic Pass the Annual Inspection?

Manual transmission converted to automatic cannot pass the annual inspection. Converting from manual to automatic is considered illegal modification. Illegal modifications include alterations to the vehicle's appearance, power system, transmission system, and braking system that exceed the original design load capacity and functions permitted by national laws and manufacturer agreements. Whether replacing the manual transmission with an automatic one or installing an automatic clutch, these modifications to the vehicle's power and transmission systems are illegal without approval from relevant authorities. Converting from manual to automatic depends on the size and position of the engine compartment. If the same model has an automatic version, the conversion is relatively easy. However, after conversion, the vehicle will fail the annual inspection. Additionally, automatic transmissions consume more fuel than manual ones and significantly reduce power performance.
10
3
Share

Can the Car Battery Be Charged While the Engine Is Running?

Yes, the car battery can be charged while the engine is running. When the car is idling, the engine drives the alternator, which in turn charges the battery. However, the efficiency of charging the car battery by idling the engine is relatively low. If the battery is severely depleted, it is recommended to remove the battery and charge it using a dedicated charger. A car battery, also known as a storage battery, is a type of battery that converts chemical energy into electrical energy. Typically, the term "car battery" refers to a lead-acid battery, which mainly uses lead and its oxides as electrodes and a sulfuric acid solution as the electrolyte. In a standard lead-acid battery, the plates are composed of lead and lead oxides, and the electrolyte is an aqueous solution of sulfuric acid.
12
5
Share

What Are the Types of Automotive Batteries?

Automotive batteries come in several types: nickel-cadmium batteries, nickel-metal hydride batteries, lithium-ion batteries, lithium polymer batteries, and lead-acid batteries. The battery is an indispensable part of a vehicle and can be categorized into traditional lead-acid batteries and maintenance-free batteries. Due to the use of lead-calcium alloy grids, maintenance-free batteries offer advantages over traditional ones, such as no need to add any liquid, easy connection to terminals, and longer charge retention. A battery is a device that converts chemical energy into electrical energy, functioning as a DC power source. Its main roles include: 1. Providing a strong starting current to the starter when starting the engine; 2. Assisting the generator in supplying power to electrical devices when the generator is overloaded; 3. Supplying power to electrical devices when the engine is idling.
14
4
Share

What are the functions of the four buttons on a Changan car key?

Changan car key functions include: lock, unlock, open trunk, one-touch window control, double press the lock button to sound the horn twice and flash the hazard lights for vehicle locating. A remote key allows you to open and lock the doors from a distance without inserting the key into the lock. Key working principle: A weak radio wave is emitted from the owner's vicinity, received by the car's antenna. The electronic control unit (ECU) identifies the signal code, and the system's actuator (motor or electromagnetic solenoid) executes the lock/unlock action. This system mainly consists of a transmitter and receiver. How to open a Changan car key: On the side of the key, there is a trapezoidal block marked with "PUSH". Press the end with the letters. Pull out the silver-white strip-shaped key at the top with your hand. Insert the larger end of the key into the groove and rotate to separate the two halves of the case. Key loss matching method: You can go to a 4S shop or auto parts market to have a new key made. Generally, it requires replacing all locks including the ignition lock, four door locks, and trunk lock. Yuexiang 2019 model: Body dimensions: length 4390mm, width 1725mm, height 1490mm, wheelbase 2535mm, fuel tank capacity 40L. It's a 4-door 5-seater sedan with a 1.5L naturally aspirated engine producing 107hp, maximum power 78.5kW, and maximum torque 145Nm.
5
3
Share

What is the Difference Between Tiptronic and Automatic Transmission Cars?

Tiptronic and automatic transmission cars differ in the following aspects: 1. Different functions: Tiptronic has two modes, one is automatic mode and the other is manual mode; automatic transmission only has automatic mode. 2. Different operations: Tiptronic requires gear shifting based on road conditions and driving situations; automatic transmission rarely requires gear shifting. When climbing a long and steep slope, you can switch to manual mode and then shift to 1st gear for climbing, which limits the vehicle to low gear driving, prevents frequent gear jumping, and makes the vehicle more powerful when climbing. When going down a long slope, manual mode should also be used, similarly limiting the transmission to low gear, which can restrain the speed and avoid overheating the brakes, thus affecting braking performance.
3
5
Share

How Many Degrees Do the Wheels Turn When the Steering Wheel Rotates One Full Turn?

The wheels turn approximately 25 degrees when the steering wheel rotates one full turn. Typically, the steering wheel can rotate about 540 to 630 degrees from the center position to one side, corresponding to a wheel turn of about 40 to 42 degrees. The steering mechanism in a car involves a reduction system, where the rotational motion of the steering wheel is converted into a linear motion that pushes the wheels to turn. This conversion means that the relationship between steering wheel rotation and wheel turn is not linear. Common steering mechanisms include rack and pinion, recirculating ball, and worm and sector types. The gear ratios in these systems can be adjusted, so the wheel angle corresponding to one full turn of the steering wheel can vary and is not fixed.
1
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.