···
Log in / Register

How many kilometers can a GL8 run on a full tank of gas?

3 Answers
DiJessica
08/30/25 6:20am
GL8 can run about 785 kilometers on a full tank of gas, and the fuel tank capacity is the maximum safe capacity of the fuel tank announced by the manufacturer. The fuel tank volume (L) refers to the size of the fuel tank volume, which measures the ability of a car to carry fuel. The fuel tank volume determines the driving range. For two cars with exactly the same engine, the larger the fuel tank, the farther the car can run. Driving habits are the most important factor in the power consumption of the vehicle's power system, and are closely related to throttle opening, discharge current, driving conditions, and speed. Pay attention to the discharge current and maintain a low and stable output of the discharge current, and the vehicle will be relatively energy-efficient. For example, gently and lightly press the accelerator pedal, use emergency brakes less, it is recommended to use ECO mode and make full use of the vehicle's energy recovery function, and use SPORT mode as little as possible. The heavy use of electrical equipment and the comfort of the air conditioning have a certain impact on the driving range, but when the customer uses power-consuming equipment, the total battery power and discharge capacity remain unchanged, so it is necessary to understand the power consumption of the discharge equipment and reduce the pure requirements for the driving range. When the vehicle is driven with AC or heating on, the driving range will be reduced. Usually, the power consumption of the air conditioning will account for 15% to 40% of the total battery power, depending on the usage time and the air conditioning gear. PTC heating is more power-consuming than AC. Vehicle load, the personnel in the vehicle or the heavy objects carried on the vehicle, or the low tire pressure will consume more power to overcome the resistance of the vehicle operation, resulting in increased power consumption during driving and shortening the driving range.
Was this review help?
6
5
Share
DeElaina
09/12/25 3:22am
I've driven the GL8 for quite a long time. A full tank is about 70 to 75 liters. Under normal city driving conditions, the fuel consumption is around 10 liters per 100 kilometers, so it's no problem to run 700 to 750 kilometers. If the road conditions are good, such as driving more on highways, the fuel consumption can drop below 8 liters, and the range can exceed 800 kilometers. But in actual driving, like when I'm stuck in city traffic, the fuel consumption goes up. Additionally, increased load also affects the range, so I usually estimate around 700 kilometers before refueling to avoid the embarrassment of running out of gas halfway.
Was this review help?
8
3
Share
Expand All
Paislee
10/26/25 4:12am
My GL8 has a fuel tank capacity of 75 liters, and on a full tank, it can cover a range of 650 to 750 kilometers. I find this range quite realistic. Driving habits play a crucial role. For instance, I usually drive gently, avoiding sudden acceleration and braking, which keeps my fuel consumption stable at around 9 liters per 100 kilometers. However, during long-distance trips or extended drives, I make it a habit to check the fuel level every 500 kilometers. After all, road conditions can be unpredictable, and factors like using the heater in cold weather or the air conditioning in summer can increase fuel consumption. Refueling earlier ensures safety and reliability.
Was this review help?
11
0
Share
Expand All
More Forum Discussions

What are the steps for performing an automotive fuel system cleaning (commonly known as 'IV drip cleaning')?

Steps for automotive fuel system cleaning (IV drip cleaning): 1. Open the hood, remove the vehicle's fuel pump fuse, and add ultra-concentrated fuel injector cleaner to the no-disassembly fuel system cleaning equipment; 2. Add the cleaning solution and hang the pressurized equipment on the vehicle's front hood; 3. Place a cloth beneath the fuel line, slowly disconnect the fuel inlet pipe, connect it to the equipment's fuel line, and start the engine of the vehicle being cleaned after confirming everything is correct. IV drip cleaning is now a very common maintenance method, primarily used for cleaning the engine's intake tract and fuel system. The advantages of this method include convenience and speed, as it can thoroughly clean the engine without disassembly, achieving excellent results.
6
2
Share

How to Remove Formaldehyde in a Car?

Methods to remove formaldehyde in a car: Thoroughly clean the car interior, use an air compressor to evenly spray photocatalyst inside the car, wait for the solvent to dry, then perform a second spray to ensure all interior components and corners are covered, and try to open windows frequently for ventilation to maintain air circulation inside the car. A car is a non-track vehicle powered by an engine, equipped with four or more wheels, primarily used for transporting passengers and goods, or towing vehicles that carry passengers and goods. Cars are divided into passenger vehicles and commercial vehicles. Passenger vehicles mainly include standard passenger cars, convertible cars, luxury cars, compact cars, roadsters, hatchbacks, station wagons, multi-purpose vehicles (MPVs), forward-control passenger cars, off-road vehicles, and special-purpose passenger cars. Commercial vehicles mainly consist of buses, semi-trailer tractors, and trucks.
18
0
Share

How to Maintain Car Batteries?

Car battery maintenance methods: 1. Avoid parking the car in open-air parking lots for extended periods. If long-term parking is necessary, remove and take the battery to prevent freezing damage; 2. Charge the car battery regularly. A battery left unused for long periods will self-discharge until it becomes unusable, so start the car periodically to charge the battery; 3. Car engines are harder to start in winter. Each attempt to start the engine should not exceed 5 seconds, with intervals of at least 15 seconds between attempts. If the engine fails to start after multiple attempts, check other aspects such as the electrical circuit, ignition coil, or fuel system; 4. Clean the battery terminals periodically and apply special grease to protect the wiring harness. Regularly inspect the battery's accessories and connecting wires.
16
4
Share

How to Determine if a Car Has a Three-Cylinder or Four-Cylinder Engine?

To determine whether a car has a three-cylinder or four-cylinder engine, open the engine hood and check the number of intake and exhaust manifolds. A three-cylinder engine has three intake and exhaust manifolds, while a four-cylinder engine has four. Three-cylinder engines are simpler in structure, more compact, lighter in weight, and easier to arrange. Four-cylinder engines are relatively more complex, with an additional cylinder, heavier weight, and more complicated layout. Engines use dynamic balancing technology to reduce vibrations. Due to inherent design, engines with four or more cylinders can balance vibrations mutually. The ignition phase angle of a three-cylinder engine is larger than that of a four-cylinder engine. Three-cylinder engines incorporate various vibration reduction mechanisms, such as pendulum-type dual-mass flywheels and crankshaft rubber damping technology.
4
2
Share

How to Install Car Snow Chains?

Installation method for car snow chains: 1. Park the car on a flat surface, use a jack to lift one of the drive wheels, and lay the snow chain flat under the lifted wheel; 2. Pull up one end of the snow chain from the fender side, then pull up the other end, and connect the inner steel cable of the snow chain; 3. Evenly spread the main body of the snow chain on the tire surface, then hook the upper and lower hooks, insert the three pins of the tensioner into the grooves of the limit lock buckle, and turn clockwise to lock the snow chain in place, completing the installation. After installing the snow chains, test drive the vehicle for about 200 meters to ensure the snow chains are fully engaged with the tires. Additionally, the maximum speed should not exceed 40 kilometers per hour, and avoid sudden acceleration or deceleration during driving.
18
1
Share

When is the best time to refuel a car?

It is best to refuel your car when the fuel warning light comes on. An excessively low fuel level can cause damage to the fuel pump. However, the remaining fuel should not be too high, as frequent refueling increases trips to the gas station, leading to waste. You can choose to refuel in the morning or evening, avoiding times when the sun is intense and temperatures are high at noon. This is because gasoline is charged by volume rather than weight, and volume is affected by temperature, expanding when hot and contracting when cold. When refueling at a gas station, the engine should be turned off, and you should avoid making phone calls, using mobile phones, or using open flames inside the station. For regular refueling, always choose gas stations with high-quality fuel. Avoid those with poor-quality fuel, as long-term use of low-quality gasoline can lead to increased carbon deposits in the engine.
12
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.