···
Log in / Register

How many kilometers can a full tank of gas last for the Honda Fit?

3 Answers
NevaehAnn
07/29/25 10:58pm
If driving on the highway, a full tank of gas can last for 600 kilometers, while in urban areas, it can last for 500 kilometers. Here are some extended details: 1. Body Dimensions: The Fit is a compact car under Honda, with a length of 4109 millimeters, width of 1694 millimeters, height of 1537 millimeters, and a wheelbase of 2530 millimeters. 2. Powertrain: The Fit is equipped with a 1.5-liter naturally aspirated engine across all models, which is part of Honda's Earth Dreams series. The 1.5-liter naturally aspirated engine in the Fit has the model code L15BU, with a maximum power output of 96 kW and a maximum torque of 155 Nm. The engine reaches its maximum power at 6600 rpm and its maximum torque at 4600 rpm. This engine features i-VTEC technology and direct injection, and it uses an aluminum alloy cylinder head and block.
Was this review help?
9
5
Share
LeBrady
08/16/25 12:45am
I've been driving a Fit for several years. Filling up the 40-liter tank usually gets me around 700 kilometers. Of course, this isn't fixed—it depends on how you drive. If you're often stuck in city traffic with constant stop-and-go, fuel consumption can go up to 7 liters per 100 km, meaning a full tank might only last 570 km. But on the highway, maintaining a speed around 90 km/h can bring the fuel consumption down to just over 5 liters, stretching the range to 800 km—pretty surprising, right? I've also picked up some tricks, like avoiding aggressive acceleration, slowing down gradually, maintaining a steady speed, minimizing hard braking, and coasting in neutral more often, which can save you an extra few dozen kilometers. Air conditioning and weather play a role too—running the AC in summer burns more fuel, while winter is a bit better. Keeping up with maintenance, like changing the engine oil or air filter, can also boost efficiency. Overall, the Fit is quite fuel-efficient and a great daily commuter car.
Was this review help?
12
3
Share
Expand All
DiLayla
10/18/25 6:02am
From a technical perspective, how far a Fit can travel on a full tank of fuel primarily depends on fuel consumption and tank capacity. The official tank size is 40 liters, with an average fuel consumption of 5.5 liters per 100 kilometers, theoretically allowing for 727 kilometers. However, in practice, driving habits vary. For instance, with smoother driving, fuel consumption can drop to 5 liters, enabling a range of 800 kilometers. Conversely, aggressive acceleration can increase consumption to 6 liters, reducing the range to 670 kilometers. Engine design is also crucial; Honda's small-displacement engine with low wind resistance offers excellent fuel efficiency. Road conditions significantly impact performance, with noticeable differences between smooth highways and congested urban areas. Vehicle maintenance cannot be overlooked—insufficient tire pressure can increase fuel consumption by 1%, and using substandard gasoline may also reduce mileage. Overall, optimizing these factors makes the Fit's range quite reliable.
Was this review help?
16
1
Share
Expand All
More Forum Discussions

Where is the cigarette lighter fuse located in the BYD F0?

The cigarette lighter fuse in the BYD F0 is located beneath the car's dashboard. Taking the 2015 BYD F0 model as an example, it is a microcar with the following dimensions: length 3460mm, width 1618mm, height 1465mm, wheelbase 2340mm, minimum ground clearance 140mm, and a curb weight of 870kg. The 2015 BYD F0 features a MacPherson strut independent front suspension and a trailing arm with torsion beam rear suspension. It is equipped with a 1.0L naturally aspirated engine producing a maximum horsepower of 68PS, maximum torque of 90Nm, and maximum power of 50kW, paired with a 5-speed manual transmission.
3
0
Share

What are the consequences of not handling a red light violation?

If a red light violation is not handled, the motor vehicle will not pass the annual inspection. If the vehicle fails to obtain a compliance mark three times in a row, it will be forcibly scrapped. For vehicle owners who suspect they may have run a red light but are unsure, they can check using the following methods: 1. Log in to the local traffic police website, click on the violation information query, enter the license plate number and engine identification code (also known as the VIN), some websites may require the engine number, and then enter the website verification code. Click confirm, and all violation information will be displayed. 2. Bring your ID card, driver's license, and vehicle registration certificate to the local violation handling office for inquiry. At the office, submit the documents to the staff, who will then retrieve the violation information. 3. Call the information hotline for inquiry.
20
3
Share

Is It Normal for the Engine Warning Light to Come On in Winter?

It is normal for the engine warning light to come on in winter. Here is a detailed explanation: 1. This situation may occur because the temperature is relatively low in winter. At this time, the internal temperature of the engine is also low, so when the car starts, the engine needs to reach a certain temperature to complete basic monitoring. 2. This fault will be detected, and the engine warning light will come on. When the engine temperature reaches a certain level, the fault will disappear, and naturally, the warning light will turn off. 3. If the warning light comes on in winter, don’t panic. Wait for the engine temperature to rise and see if the warning light turns off. If it does after the temperature rises, there is no problem, and you can drive normally. 4. If the warning light remains on when starting, it is likely due to excessive carbon deposits in the cylinders. Since carbon absorbs oil, the temperature in the cylinders may not reach a stable level. In this case, you still need to wait for the engine temperature to rise to ensure the issue is resolved.
4
4
Share

How to Adjust the Driver's Seat Properly?

Methods for adjusting the driver's seat: 1. Seat height adjustment: (1) Car seat adjustments are divided into manual and electric adjustments. Depending on the vehicle configuration, some models may have different seat adjustment functions. (2) After entering the car, the first step is to adjust the seat height. For most sedans and SUVs, there should be a distance of 1-2 fists between the top of your head and the roof (this may vary slightly for different models). Ensure that the height of your eye level is slightly above the center of the vertical distance of the front windshield. 2. Seat forward and backward adjustment: When adjusting, always remember the principle: your feet should be able to fully depress the clutch and brake pedals; when holding the steering wheel, your arms should be slightly bent. 3. Backrest angle adjustment: The backrest angle should also be adjusted properly. It should not be too reclined or too upright, as this reduces the distance between your body and the steering wheel, which may increase the risk of injury from the airbag in an emergency.
8
0
Share

What are the reasons for severe engine vibration in the Lingdong?

The reasons for severe engine vibration in the Lingdong are: 1. Low engine temperature; 2. Severe engine carbon buildup; 3. Engine misfire; 4. Spark plug failure. Taking the 2020 Lingdong as an example, it is a compact car with body dimensions of: length 4610mm, width 1800mm, height 1450mm, wheelbase of 2700mm, minimum ground clearance of 152mm, and a body weight of 1319kg. The 2020 Lingdong is equipped with a 1.4T turbocharged engine, delivering a maximum horsepower of 130PS, maximum torque of 211Nm, and maximum power of 95.6kW, paired with a 7-speed dual-clutch transmission.
19
0
Share

Can You Add Engine Oil Right After Turning Off the Car?

You can add engine oil right after turning off the car. The method for adding engine oil is as follows: 1. Pull out the oil dipstick, wipe it clean, and measure again to see how much oil is missing; 2. Open the oil cap to add oil, then close the cap and start the car for a few minutes. After the oil has circulated in the engine for a while, check the oil dipstick again. If the level has dropped, continue adding more. The main functions of engine oil are: 1. Lubrication; 2. Assisting in cooling; 3. Cleaning; 4. Sealing and preventing leaks; 5. Rust and corrosion prevention; 6. Shock absorption; 7. Anti-wear. The method for changing engine oil is: 1. Lift the car, remove the undercover, and place a container of about 10 liters under the oil drain plug; 2. Unscrew the oil drain plug, use an air gun to blow into the oil filler port for two minutes, then tighten the drain plug after draining and wipe it with a tissue to check for leaks; 3. Reinstall the undercover and lower the car, then use a funnel to add oil through the filler port.
13
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.