How many kilometers can a full tank of gas last for the CFMOTO 250SR?

3 Answers
StViolet
07/28/25 2:11pm
The CFMOTO 250SR has a fuel tank capacity of only 12 liters, with a fuel consumption of 4-5L per 100 kilometers. This means a full tank can last approximately 200-260 kilometers. The reasons for increasing fuel consumption in vehicles are as follows: 1. Impact of temperature on fuel consumption fluctuations: Generally, in winter when temperatures are low, fuel consumption tends to increase, almost comparable to fuel consumption when using air conditioning in summer. This is because lower temperatures cause the engine to dissipate more heat. 2. Lack of regular vehicle maintenance: Dirty engine oil and air filters can also lead to increased fuel consumption. Dirty oil results in poor lubrication, increasing resistance in the engine's moving parts and requiring more energy to overcome this resistance, thereby increasing fuel consumption. 3. Spark plugs need replacement: Spark plugs are often overlooked. Although they may still function, worn spark plugs can cause delayed ignition due to insufficient ignition energy, missing the optimal ignition timing.
Was this review help?
9
4
Share
CassidyAnn
08/11/25 6:44pm
How far can a full tank of gas take the CFMoto 250SR? As a frequent rider myself, mainly in urban areas with occasional highway runs, a full 12-liter tank typically lasts around 350 km. Fuel consumption largely depends on your riding style: gentle cruising in eco-mode can push it close to 400 km, while aggressive acceleration, high-speed runs, or hill climbs may drop the range below 300 km. Remember to check tire pressure and engine oil condition—they directly impact fuel efficiency. Shorter oil change intervals and proper engine maintenance can extend mileage. Avoid overloading; carrying passengers means more frequent refueling. This sporty bike delivers thrilling performance, but prioritize safety over speed. For long trips, plan fuel stops carefully to avoid running dry. After refueling, monitor the fuel gauge and keep simple records to track your actual range based on personal riding habits.
Was this review help?
12
4
Share
Expand All
LeJohn
09/29/25 3:10am
The CFMoto 250SR has a fuel tank capacity of 12 liters. With a standard fuel consumption of 3.5 liters per 100 kilometers, theoretically, a full tank can cover 340 kilometers. In practice, it varies by individual: driving conservatively on suburban roads, I can reach 360 kilometers, while in congested urban areas, it may drop to 300 kilometers. Multiple factors affect this, such as seasonal changes—winter heating consumes more fuel, and summer air conditioning also reduces range. Driving style is crucial; avoiding aggressive acceleration or sudden braking and maintaining smooth speed changes can save significant fuel costs. Vehicle maintenance shouldn’t be overlooked either—regularly cleaning spark plugs and air filters ensures combustion efficiency. Before long trips, check the fuel system; leaks would render everything pointless. For safety, don’t run the tank completely dry before refueling to avoid breakdowns. Overall, this bike is economical and ideal for beginners to practice fuel-saving techniques.
Was this review help?
17
4
Share
Expand All
More Forum Discussions

Does the Corolla have ISOFIX hard connectors?

The Corolla has ISOFIX connectors for child safety seats, and it is recommended to prioritize safety seats with ISOFIX connectors. When purchasing a child safety seat, choose one that matches the corresponding connectors. It is best to use fixed points for installation and securement, and it is not recommended to use seat belts for fixing. Additional information: 1. The advantage of ISOFIX is that it is particularly easy to install, with a very low error rate during installation, and a relatively high safety coefficient; 2. The disadvantage is that it is more expensive, and the prerequisite is that your car must have two ISOFIX connectors. Simply put, ISOFIX connectors are two fixed connectors at the base of the car seat that can directly connect to a child safety seat.
1
1
Share

When to Use High Beam and Low Beam Headlights?

High beam and low beam headlights are used in the following situations: 1. High beam: High beam headlights are generally suitable for driving at night on roads without streetlights or with poor lighting, such as on poorly lit national highways or expressways. When the vehicle speed is below 30 km/h, low beam should be used, while when the speed exceeds 30 km/h, high beam can be used to illuminate up to 150 meters ahead, ensuring driving safety. 2. Low beam: When an oncoming vehicle is within 150 meters, the high beam should be switched to low beam to avoid obstructing the oncoming driver's vision. If the other driver does not switch to low beam, immediately reduce speed and repeatedly alternate between high and low beams as a signal. If the other driver still does not switch, slow down and pull over to the right to yield, avoiding any aggressive use of high beams that could impair both drivers' vision and lead to an accident.
2
0
Share

Can Android Phones Use CarPlay?

Android phones cannot use CarPlay. Below are some differences between CarLife and CarPlay: 1. Developer: CarLife is China's first cross-platform car-phone connectivity system launched by Baidu's Internet of Vehicles, while CarPlay is a car-phone connectivity system released by Apple Inc. in the United States. 2. Compatibility: The CarLife vehicle terminal is compatible with Android, Linux, and QNX, while the user terminal supports both Android and Apple iOS operating systems, covering over 95% of smartphones. In contrast, CarPlay only supports iPhone. 3. Features: CarLife supports a wide range of third-party applications, whereas CarPlay began supporting third-party navigation on June 5, 2018.
5
2
Share

Where is the Car's Evaporator Located?

The evaporator of a car's air conditioning system is generally installed beneath the dashboard. Here is some information about the air conditioning system: 1. Definition: A car's air conditioning refers to the air conditioning device installed in a vehicle, which can cool, heat, ventilate, and purify the air inside the cabin, providing a comfortable environment for passengers, reducing driver fatigue, and enhancing driving safety. The air conditioning system has become one of the indicators of a car's comprehensive functionality. 2. Classification: Based on the driving method, it can be divided into: Independent type (uses a dedicated engine to drive the compressor, with large cooling capacity and stable operation, but high cost, large size and weight, mostly used in large and medium-sized buses) and Non-independent type (the air conditioning compressor is driven by the car's engine, with cooling performance significantly affected by the engine's operation, poor stability, mostly used in small buses and cars).
18
2
Share

What to Do If Reverse Gear Won't Stay Engaged?

Car reverse gear won't stay engaged mainly due to low vehicle temperature, incomplete lubrication of transmission oil, mismatch between vehicle speed and gear position, or lack of synchronizer between first gear and reverse gear. The main solutions are as follows: 1. Attempt to engage reverse gear when the vehicle is stationary: If the transmission makes a "clicking" gear collision sound during the process of engaging reverse gear, it indicates that the vehicle's clutch is not fully disengaged. After repairing the clutch, the fault can be eliminated. 2. Adjustment and repair: Go to a specialized repair shop to adjust the gear position and replace the transmission oil, and the fault can also be eliminated. For manual transmissions, when shifting at low speeds, the clutch must be able to fully disengage in order to smoothly engage the corresponding gear.
8
5
Share

What is the function of engine valve timing?

Engine valve timing mechanism serves to: timely open and close the intake and exhaust valves of each cylinder, allowing fresh combustible mixture (for gasoline engines) or air (for diesel engines) to enter the cylinder promptly, and exhaust gases to be expelled from the cylinder in a timely manner. Below is a partial introduction about engines: 1. Definition: An engine is a machine capable of converting other forms of energy into mechanical energy. 2. Classification: Internal combustion engines, external combustion engines (such as Stirling engines, steam engines, etc.), jet engines, electric motors, etc. 3. Composition: The engine block assembly mainly consists of components such as the cylinder block, cylinder liner, cylinder head, and cylinder gasket.
19
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.