How Many Kilometers Can a Full Tank of Gas Last for the Baojun 530?

What is the reason for abnormal display on the Honda CR-V dashboard screen?

Reasons for abnormal display on the Honda CR-V dashboard screen: Vehicle power supply voltage issues: Check the stability of the vehicle's power supply voltage to rule out the possibility of voltage instability. Car navigation cable problems: If the voltage is stable, then inspect the cables on the back of the device for any issues, which can be resolved by replacing the connections. Here is some related information about the Sonata 9: Design aspects: The ninth-generation Sonata adopts the Fluidic Sculpture 2.0 design concept, with streamlined contours advocating a "flattened" look, giving an overall more stable and grand feel, while also reducing the drag coefficient to some extent. Dimensions: The ninth-generation Sonata measures 4855/1865/1485 mm in length, width, and height, with a wheelbase of 2805 mm, which is 35 mm, 30 mm, and 10 mm larger than the current model respectively, and the wheelbase is extended by 10 mm.

2

3

Share

What is the fuel consumption of Honda 150?

The fuel consumption of Honda 150 is generally around 1.5~2 liters per 100 kilometers. Of course, the driving conditions and habits directly affect the fuel consumption, so it is important to maintain good driving habits. The main factors affecting fuel consumption are as follows: Insufficient tire pressure: Maintaining normal tire pressure is also a good way to reduce fuel consumption. If the tire pressure is insufficient, rolling resistance will increase significantly. According to tests, if the tire pressure is 2 psi (pounds per square inch) lower than the specified value, fuel consumption will increase by 1%. Additionally, misaligned or excessively worn tires may also increase fuel consumption. High speed in low gear: Driving at high speeds in low gear often occurs among beginner drivers or those who are easily distracted while driving. Tests have shown that driving long distances at high speeds in 3rd gear can increase fuel consumption by 10% compared to normal driving in 4th gear. Using 2nd gear instead of 3rd gear will further increase fuel consumption.

17

3

Share

What is the size of the crankshaft pulley bolt for the Volkswagen EA211?

Volkswagen EA211 crankshaft pulley bolt is 22mm. A 22-point star socket is used for this bolt. When removing this bolt, be cautious of timing misalignment, and special tools are required for installation. Marking position: Tighten with a torque wrench, which has markings; tighten to approximately the indicated position. Torque standard for crankshaft bearing cap bolts: For gasoline engines, it's about 100N, and for diesel engines, it's about 200N. Composition of the crankshaft: It consists of main journal, connecting rod journal, crankshaft arm, counterweight, front shaft end, and rear shaft end. One connecting rod journal, along with the two adjacent crankshaft arms and the front and rear main journals, forms a crank throw. There are two types: one-piece and assembled.

11

5

Share

What is the fuel consumption of the Geely Borui?

Geely Borui 1.8T has a fuel consumption of around 7 to 8 liters, and about 10 liters in pure urban driving. Automobile fuel consumption: Generally, the car's onboard computer will provide an average fuel consumption value, which is displayed on the dashboard, but it usually differs from the actual fuel consumption. Specific car fuel consumption can be calculated using a formula. Automobile fuel consumption precautions: Plan your route before driving, check the traffic conditions, and try to avoid roads that are prone to traffic jams. Try to maintain a steady speed while driving. Unstable driving speed will increase fuel consumption by about 6% in suburban areas and 2% in urban areas. Do not carry unnecessary items in the car to reduce the weight of the vehicle.

13

4

Share

What is the fuel consumption of the Lanyue Little Bear?

The fuel consumption of the Lanyue Little Bear is approximately 10L per 100 kilometers. The main factors affecting fuel consumption are as follows: Poor driving habits: Sudden acceleration and hard braking can increase fuel consumption by 5% to 30%. Gentle and reasonable driving is more fuel-efficient. Long-term idling is also not good for the engine and only increases fuel consumption. Poor driving habits are a key factor affecting a car's fuel consumption, so it is important to adopt the correct driving methods. Using poor-quality fuel: During the break-in period of a new car, the gasoline used should not be lower than the grade specified by the manufacturer. Do not add anti-wear oil additives to avoid insufficient break-in despite reaching the required mileage.

1

Share

Must the ETC device be attached to the windshield?

ETC can be used without being attached to the windshield. Installing the ETC on the upper part of the windshield is to minimize obstruction of the driver's view and to ensure better recognition by the equipment at highway toll stations. If you prefer not to install it on the windshield, place it in an open area where it can still be seen through the windshield. For small cars, the ETC is generally installed in the upper middle part of the front windshield, while for large vehicles like trucks and buses, it is installed in the lower middle part. The suitable installation position should be no lower than 1.2 meters and no higher than 2.5 meters, with an installation angle between 30 and 90 degrees. For vehicles with factory-installed or aftermarket anti-explosion films, which may affect microwave signal transmission, the ETC should be installed in the microwave window area. Here are some installation considerations for ETC: Do not obstruct the view; installing it behind the rearview mirror is ideal: Many car models have windshields with a significant backward tilt, which can reduce the driver's field of vision. Installing the ETC without considering this may increase blind spots. Installing it behind the rearview mirror on the right side can help avoid obstructing the view. Do not interfere with charging: The ETC electronic tag consumes power but generally does not require charging or battery replacement, as it has a built-in solar panel for self-charging. Therefore, avoid installing it on the blackened areas of the windshield or in positions that may block the solar panel. Do not remove it arbitrarily once installed: The button in the middle of the adhesive is an anti-tamper lever connected to a switch. Once the ETC is installed, the windshield will press the lever in. If removed arbitrarily, the lever will pop out, triggering the switch and locking the electronic tag, rendering it unusable. You will then need to visit an ETC service point to unlock it. This mechanism is designed to prevent multiple vehicles from sharing one device. When using ETC, note the following: The ETC transaction sensing range is 8 meters. To avoid issues caused by a malfunctioning ETC device in the vehicle ahead, maintain a distance of at least 10 meters to prevent automatic payment for the preceding vehicle. The ETC lane recognizes vehicles at speeds up to 20 km/h; exceeding this speed may result in failed transactions due to inability to read the device. If using a debit card linked to ETC, insufficient balance may also cause transaction failures.

20

2

Share

How Many Kilometers Can a Full Tank of Gas Last for the Baojun 530?

What is the reason for abnormal display on the Honda CR-V dashboard screen?

What is the fuel consumption of Honda 150?

What is the size of the crankshaft pulley bolt for the Volkswagen EA211?

What is the fuel consumption of the Geely Borui?

What is the fuel consumption of the Lanyue Little Bear?

Must the ETC device be attached to the windshield?

What is the fuel consumption of the Toyota IZOA?

Where are the reinforcement ribs located on a vehicle?

Where is the defogger switch on the Mazda 3 Axela?

What is the displacement of the Mercedes 450?