How many kilometers can a full tank of fuel run in the Lamando 280?

1 Answers
CorbinFitz
07/30/25 10:26am
Lamando 280 can run about 900 kilometers on a full tank of fuel. Fuel tank capacity: Generally, small cars have a fuel tank capacity of 35-45 liters, while medium-sized cars have a fuel tank capacity of about 55-75 liters. After filling up the tank, most cars can drive about 500 kilometers. The fuel tank size varies based on the car's displacement—larger fuel consumption means a larger tank, and smaller consumption means a smaller tank. In China, the regulation stipulates that the fuel tank capacity should be 95% of the rated value, but in reality, the actual capacity is usually larger than the nominal capacity, so there is no need to worry about the fuel tank being smaller than expected. Factors affecting fuel consumption: Driving habits, road conditions, the weight of items placed in the car, whether the air conditioning is on, and whether the vehicle is in the break-in period—all these factors can affect the vehicle's fuel consumption.
Was this review help?
3
0
Share
More Forum Discussions

What causes the BYD F3 to sometimes stall automatically?

Here are the reasons why the BYD F3 sometimes stalls automatically: 1. Intake pipe: Vacuum leakage in the intake pipe. 2. Idle speed: Unstable idle speed caused by improper idle adjustment, dirty throttle body, poor idle control system performance, etc. 3. Fuel pressure: Unstable fuel pressure, such as excessive wear or poor contact of the electric fuel pump brush, or clogged fuel pump filter screen. 4. Ignition system: Poor performance of the ignition system. For example, high-voltage sparks, spark plugs used for too long, incorrect ignition timing, poor contact of the ignition coil or inter-turn short circuit in the hot state resulting in no high-voltage spark or weak high-voltage spark, poor contact of the low-voltage line, damaged insulation adhesive intermittently grounding, poor grounding.
4
2
Share

Should I use turn signals when changing lanes on a dashed line?

You should use turn signals when changing lanes on a dashed line. Turn signals are required whenever you intend to change lanes. Additional information: 1. It's a violation: Changing lanes without using turn signals is considered a traffic violation. Failing to use turn signals when changing lanes is categorized as improper use of vehicle lights, which may result in a fine and 1 penalty point. 2. Left turn signal: You should activate the left turn signal in advance when making a left turn, changing to the left lane, preparing to overtake, leaving a parking spot, or making a U-turn. 3. Right turn signal: You should activate the right turn signal in advance when making a right turn, changing to the right lane, returning to the original lane after overtaking, or pulling over to park.
10
1
Share

When reversing, which way does the car body move when the steering wheel is turned to the left?

When reversing, turning the steering wheel to the left makes the front of the car move to the right. If you need to adjust the rear of the car to the left, turn the steering wheel to the left; to adjust the rear to the right, turn the steering wheel to the right. Extended content: If the entire car body is leaning to the left, adjusting the car body can be divided into two situations: 1. When the car is moving forward: Using the front of the car as a reference, if the front is leaning to the left, it means the right side is wider. Turn the steering wheel to the right and straighten it when the car body is about to align with the markings on both sides. 2. When the car is moving backward: Using the rear of the car as a reference, if the rear is leaning to the right, it means the left side is wider. Turn the steering wheel to the left and straighten it when the car body is about to align with the markings on both sides.
11
1
Share

What is the function of the RES button on the steering wheel?

There are two functions of the RES button on the car steering wheel. One is for acceleration after setting the cruise control, and the other is to press RES to restore the previously set speed after temporarily canceling the cruise control. The following is a related introduction about the steering wheel: 1. Introduction to the steering wheel: It is a wheel-shaped device used to control the direction of cars, ships, airplanes, etc. 2. Function of the steering wheel: The steering wheel is generally connected to the steering shaft through splines, and its function is to convert the force applied by the driver to the edge of the steering wheel into torque and then transmit it to the steering shaft. When turning with a larger diameter steering wheel, the hand force required by the driver can be smaller. The steering transmission shaft serves as a connecting piece between the steering gear and the steering shaft, which is beneficial for the generalization of the steering gear, compensates for errors caused during manufacturing and installation, and makes the installation of the steering gear and steering wheel on the vehicle more reasonable.
1
3
Share

What Toyota model is gtm7152ccm?

The Toyota gtm7152cm model is the Yaris L equipped with a 1.5L naturally aspirated engine. Additional information: 1. Exterior: The new Yaris L maintains its original oversized body dimensions and bold front grille design. With the goal of "enhancing distinctive image and iconic appearance", it features China-market exclusive redesigned bumpers, headlight clusters with added daytime running lights, and modified taillight layouts with LED light sources that also reduce energy consumption. 2. Safety features: Building upon the existing ABS+BA (Anti-lock Braking System/Brake Assist), the new Yaris L adds VSC (Vehicle Stability Control) and TRC (Traction Control) systems. These systems constantly monitor all four wheels, selectively braking wheels slipping on wet/snowy surfaces while limiting engine output to ensure directional stability and prevent skidding or loss of control.
7
0
Share

Can a Sedan Carry 1000 Jin of Cargo?

Generally, the load capacity of a family sedan ranges from 375 to 500 KG. There is no precise calculation method, and the load capacity should be based on the weight indicated on the nameplate hung when the car leaves the factory. The national standard is 375 kilograms, which means the load capacity of the produced car cannot exceed 375 kilograms. Below is additional information: Relevant regulations: Article 54 of the "Implementation Regulations of the Road Traffic Safety Law of the People's Republic of China" stipulates that the load of a motor vehicle must not exceed the load capacity approved on the vehicle's driving license, and the loading length and width must not exceed the dimensions of the vehicle compartment. The following regulations should also be observed: For heavy and medium-duty trucks and semi-trailers, the height of the load from the ground must not exceed 4 meters, and for vehicles carrying containers, the height must not exceed 4.2 meters. For other motor vehicles carrying goods, the height from the ground must not exceed 2.5 meters.
16
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.