How many kilometers can a Fit run after the fuel tank light comes on?

2 Answers
StJessica
09/03/25 3:16am
When the fuel tank light of a Fit comes on, it can generally run for about 60 kilometers. As a conservative estimate, it can still run for more than 30 kilometers. However, you should find a gas station to refuel as soon as possible to avoid the risk of breaking down. Waiting until the fuel tank light comes on to refuel can damage the fuel pump, and when the fuel is nearly empty, the intermittent fuel supply can cause incomplete combustion, leading to increased fuel consumption. Below is some relevant information about the Fit: 1. Model Introduction: The Fit is a hatchback launched by GAC Honda. The third-generation Fit was released on May 29, 2014, positioned as a stylish and cool hatchback targeting the new generation of post-90s consumers who pursue individuality, with a spacious interior. 2. Design Concept of the Fit: The third-generation Fit adopts the Exciting H Design as its overall design philosophy, featuring Honda's latest family-style front-face design concept, Solid Wing, where the front grille and headlights are integrated to highlight a sharp and cool appearance.
Was this review help?
20
4
Share
LaKai
09/15/25 4:57am
Last time the fuel light came on in my Fit, I panicked and immediately checked the navigation for a gas station. The experience is that when the light comes on, there are still 5 to 7 liters of fuel left. Based on the Fit's urban fuel consumption of 6 liters per 100 kilometers, it can run at least 50 to 70 kilometers. However, this is just a conservative estimate, depending on personal driving habits. I usually drive steadily at speeds below 60, not exceeding 80. Once on a highway section, I even managed to drive 80 kilometers without stalling. Road conditions are also crucial; uphill consumes fuel quickly, while downhill saves fuel and allows for more distance. But don't push your luck; delaying refueling can easily damage the fuel pump, and repairs can cost several hundred. I recommend finding the nearest station to refuel when the light comes on, don't risk it to save time. After all, safety comes first, and stalling on the road is a hassle.
Was this review help?
15
1
Share
Expand All
More Forum Discussions

What brand of engine oil is suitable for the Teana?

The suitable engine oil for the Teana is the erg brand. erg engine oil offers high cost-performance, strong acceleration, and a very quiet engine. Taking the 2021 Teana as an example, it belongs to the mid-size car category with body dimensions of: length 4901mm, width 1850mm, height 1450mm, wheelbase 2825mm, fuel tank capacity 61.3l, and curb weight 1456kg. The 2021 Teana features a MacPherson strut front suspension and a trapezoidal control arm multi-link rear suspension. It is equipped with a 2.0L naturally aspirated engine, delivering a maximum horsepower of 156ps, maximum power of 115kw, maximum torque of 197nm, and is paired with a continuously variable transmission.
17
2
Share

How to Remove Cement Stains from a Car?

The methods to remove cement stains from a car are: 1. Rinse the cement stains with clean water before they harden; 2. Spray white vinegar or a specialized cement cleaner on the stains, wait for them to soften, and then rinse with clean water; 3. Pour gasoline on the stains, wait for the car paint to soften, and then rinse off the cement stains with water. Methods to maintain car paint include: 1. Wash the car only after the engine has cooled down; 2. Minimize exposure to direct sunlight; 3. Clean any stains on the car body promptly; 4. Rinse the car with clean water after rain to prevent acid rain corrosion; 5. Apply wax or glaze.
16
5
Share

How many lights remain on after a car's self-check?

After a car's self-check, 5 lights remain on. When the car is powered on, it begins the self-check process, during which all dashboard lights illuminate and then turn off sequentially. Only the battery, EPC, engine fault light, handbrake warning light, and seatbelt warning light remain illuminated. The reasons for several red lights staying on after the self-check include: 1. Leakage of vehicle oil, brake fluid, gasoline, or coolant; 2. Malfunction in the vehicle's braking system; 3. Air leakage in the air pump or air reservoir; 4. Abnormal tire pressure; 5. Loose tire fastening screws; 6. Issues with vehicle turn signals, brake indicators, lighting, windshield wipers, or horn.
10
4
Share

What Causes Heavy Car Exhaust?

Heavy car exhaust can be caused by: 1. The air-fuel mixture being too lean or too rich; 2. Failure of the catalytic converter; 3. Low fuel pressure, clogged fuel injectors, vacuum leaks, or EGR valve leaks; 4. Insufficient cylinder pressure or engine temperature being too low; 5. Air-fuel mixture leaking from the combustion chamber to the crankcase, fuel line leaks, or a damaged fuel pressure regulator; 6. A clogged three-way catalytic converter or a stuck EGR valve, preventing the engine's air-fuel ratio control and catalytic purification system from functioning properly; 7. A clogged fuel return line or a damaged fuel pressure regulator; 8. Inaccurate ignition timing, intermittent ignition misfires, or faulty temperature sensors.
19
0
Share

What are the reasons why the fog on the outside of the windshield cannot be blown away?

The reason why the fog on the outside of the windshield cannot be blown away is the temperature difference between the inside and outside of the vehicle. The temperature inside the cabin is higher than outside, causing moisture inside the cabin to condense. Solutions to remove fog from the outside of the windshield include: 1. Wiping it clean with a towel; 2. Turning on the car's heater to clear the fog; 3. Using the air conditioning's cooling and dehumidifying function to reduce air humidity; 4. Applying an automotive glass anti-fog agent. The functions of the car windshield are: 1. Protecting against wind and rain, and reducing noise; 2. Reducing wind resistance and improving airflow; 3. Ensuring the safety of passengers. Methods to maintain car glass include: 1. Using dedicated or suitable wiper blades and replacing them promptly; 2. Keeping the windshield clean; 3. Using automotive-specific glass cleaner.
16
3
Share

How to Reset the Sunroof on a Sagitar?

The method to reset the sunroof on a Sagitar is as follows: 1. Press the initialization button for 10 seconds until the sunroof moves to the tilt position; 2. Once the sunroof stops moving, release the button; 3. Within 6 seconds, press and hold the initialization button again until the sunroof is completely closed; 4. Release the button to complete the reset. Taking the 2018 Sagitar as an example, it is a compact car with body dimensions of: length 4753mm, width 1800mm, height 1462mm, wheelbase 2731mm, and a fuel tank capacity of 50 liters. The 2018 Sagitar features a front MacPherson independent suspension and a rear multi-link independent suspension. It is equipped with a 1.2L turbocharged engine, delivering a maximum horsepower of 116PS, maximum power of 85kW, and maximum torque of 175Nm, paired with a 5-speed manual transmission.
19
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.