···
Log in / Register

How many kilometers can a Corolla travel with one bar of fuel?

4 Answers
Derrick
08/28/25 7:52am

A full tank of fuel in a Corolla can travel approximately 500 kilometers under comprehensive road conditions. The driving range of a Corolla is related to its fuel consumption. The following are specific factors that affect fuel consumption: Vehicle Condition: In addition to regular cleaning, it is also important to pay attention to the vehicle's condition, perform regular maintenance, and carry out timely repairs. Driving Habits: Poor driving habits can waste fuel without notice, such as carrying unnecessary weight, opening windows while driving at high speeds, rapid acceleration, and sudden braking, all of which can increase fuel consumption. Road Conditions: Driving in urban road conditions can increase fuel consumption by 20% compared to driving on test tracks, mainly due to frequent starts, stops at traffic lights, and gear shifting, which lead to higher fuel consumption.

Was this review help?
6
0
Share
JustinAnn
09/10/25 6:02am

Speaking of how many kilometers a Corolla can drive with one bar of fuel, I've been driving this car for several years and often observe this. One bar represents a fraction of the fuel tank. Generally, the Toyota Corolla has a 50L fuel tank divided into 8 bars, so one bar is approximately a little over 6L. Fuel consumption varies depending on road conditions and the car model: in city traffic jams, it might consume 8-9L per 100km, meaning 1L only drives about 12km, so one bar can cover roughly 70km; on the highway with smooth driving, fuel consumption drops to 6L per 100km, meaning 1L drives 16km, so one bar can reach up to 100km. This also depends on driving habits—I prefer steady speeds, so one bar can last a bit longer in the hybrid version. A reminder: don't always wait until only one bar is left to refuel, as this can damage the fuel pump and cause the car to break down. I learned this the hard way, so I make it a habit to refill when there are two bars left. It's also essential to check the accuracy of the fuel gauge, as some older cars have inaccurate sensors that can mislead. Remember, regular maintenance like changing the air filter can make fuel consumption more economical, allowing one bar to go further.

Was this review help?
11
5
Share
Expand All
LaFelix
10/24/25 6:53am

Calculating how far a single fuel bar can take a Corolla is quite fun. I often enjoy discussing this with fellow car enthusiasts. Let's start with the basics: the fuel tank typically holds 50L, divided into 8 bars means each bar represents about 6.25L. With the Corolla's average fuel consumption at 7L per 100km, one liter of fuel can take you approximately 14km, so theoretically, one bar should last around 87km. But this number fluctuates significantly—using AC in summer increases fuel consumption by 10%, reducing one bar's range to about 75km; cold starts in winter also decrease the distance per bar. Driving style plays a crucial role: I've experienced one bar lasting less than 60km with aggressive acceleration, while smooth driving can get you close to 80km. The model also makes a big difference—the hybrid version can travel farther per liter, with one bar potentially reaching 95km. I recommend using a mobile app to track actual distances after several refuels to determine your precise range—don't rely solely on the fixed numbers in the manual.

Was this review help?
19
3
Share
Expand All
LeElle
12/07/25 7:17am

How far can you drive with one bar of fuel left in a Corolla? I suggest not taking chances. Safety first—this bar is just an estimate with many variables: in poor city conditions, one bar is about 60km, while on highways it can exceed 80km. When the fuel level is too low, the engine fuel pump can overheat and stall, posing a risk, especially in remote areas. I always make it a habit to leave some margin and refuel before it drops to two bars to ensure safety. It’s also important to check if the fuel gauge is accurate, as sensor failures are common and can cause inaccurate readings. Developing good habits like smooth acceleration and turning off the AC can help you stretch one bar of fuel further, but never push the limits to avoid unexpected hazards.

Was this review help?
2
4
Share
Expand All
More Forum Discussions

What is the installation method for a front and rear dual-camera dash cam?

The installation method for a front and rear dual-camera dash cam is as follows: 1. Connect the power supply and start routing the wires; 2. Insert the wires from left to right into the ceiling; 3. Route the wires to the upper right corner and towards the door, then forcefully pry open the side panel to insert them; 4. Run the wires downward along the B-pillar; 5. At the door edge, peel back the door seal and insert the wires; 6. Continue routing the wires downward along the seal; 7. Remove the floor mat and run the wires underneath it; 8. Plug the dash cam into the cigarette lighter to automatically power it on; 9. Turn off the device and begin routing the wires; 10. Insert the wires from left to right into the ceiling, then pry open the corner cover; 11. Route the wires along the gaps all the way to the rear; 12. Route the wires along the window towards the rear, pry open the seal, and insert the wires; 13. Attach the rear camera to the rear windshield and adjust the angle; 14. Align the wires and connect the rear camera power cable; 15. Finally, conceal the wires.
16
5
Share

How long after the car loan is paid off can the vehicle be transferred?

The bank will release the mortgage and return the green title to the owner after the car loan is fully paid off. Then, the owner needs to take the green title to the vehicle management office to complete the mortgage release procedure. Required documents: 1. Original and photocopy of the vehicle owner's identity proof (for organizational vehicles, the original and photocopy of the organization code are required, and temporary residents also need to provide the original and photocopy of a valid residence permit); 2. Identity proof of the mortgagee (must be stamped with an official seal); 3. Power of attorney from the mortgagee (stamped with an official seal and verification seal); 4. If an agent is involved, the original and photocopy of the agent's identity proof and the power of attorney are also required; 5. Vehicle registration certificate; 6. Fill out the "Application Form for Mortgage Registration or Pledge Filing of Motor Vehicles". Procedure: Go to the comprehensive service window at the vehicle management service center hall to complete the process.
7
0
Share

Can You Refuse to Take Delivery of a Car Older Than 3 Months?

You can refuse to take delivery of the car. After placing an order for a motor vehicle, you can request that the production date of the vehicle must fall within a specified time frame. If it exceeds this period, you have the right to refuse delivery. Below are specific details about vehicle delivery inspection: 1. Check the vehicle's paint: Inspect for any scratches or wear on the paint. Observe under ample sunlight to check for color discrepancies. Open the doors and adjust them to various angles to examine the sheet metal for smoothness under different lighting conditions. 2. Inspect the bodywork: Examine the gaps between components such as the front hood, doors, fuel cap, taillights, and headlights to ensure they are even. Uneven gaps may indicate that parts have been replaced. 3. Check the vehicle's identification plate: The vehicle's identification plate is located on the side of the driver's door or inside the engine compartment. Verify that the VIN (Vehicle Identification Number) matches. 4. Assess the vehicle's wear: Check if the tire tread hairs are intact and inspect the undercarriage for any signs of scraping.
8
4
Share

Will there be a score if I don't sign after completing Subject 2?

There will be a score even if you don't sign after completing Subject 2, as the test center or driving school will sign on your behalf. Tips for operating the reverse parking in Subject 2: 1. Seat belt: After getting into the car, the driver should first adjust the seat and rearview mirror, fasten the seat belt, then shift the car into reverse gear, release the parking brake lever, and start the car at idle speed to reverse. The driver observes the garage through the right rear window. 2. Speed: Control the driving speed by using first gear or reverse gear at idle speed throughout. The speed at which you start is the speed at which you should drive. Control the timing of steering. During reversing, observe carefully, grasp the key points of steering, and steer at the right time. 3. End of test: Control the driving route. During the test, the car's driving route mainly depends on the speed of turning the steering wheel and the driving speed. When reversing, aim at the sideline, correct the direction in time, and keep the car straight into the garage.
5
1
Share

What brand of audio system is used in Mercedes-Benz cars?

Mercedes-Benz audio systems vary by model series: 1. The original equipment for mid-to-low-end series like the E-Class and C-Class is Bosch audio; 2. AMG and S-Class models use Harman Kardon audio systems from Denmark; 3. Models such as the S-Class, E-Class, C-Class, A-Class, GLC, CLS, G-Class, and V-Series are equipped with Burmester audio systems. Taking the 2020 Mercedes-Benz G-Class as an example, it belongs to the mid-to-large SUV category, with body dimensions of: length 4866mm, width 1931mm, height 1968mm, a wheelbase of 2890mm, and a fuel tank capacity of 100L. The 2020 Mercedes-Benz G-Class features a front suspension with a double-wishbone independent suspension and a rear suspension with a solid axle non-independent suspension. It is powered by a 2.0L turbocharged engine, delivering a maximum horsepower of 258PS, maximum power of 190kW, maximum torque of 370Nm, paired with a 9-speed automatic transmission.
17
0
Share

How to Replace the Coolant in a Volkswagen Polo?

polo's coolant reservoir is located on the left side of the engine. The coolant replacement interval is 60,000 kilometers, and the replacement capacity is 4L. Below are the detailed steps for replacing the coolant: 1. Before replacing the coolant, let the vehicle sit for 30 minutes to prevent burns from the hot coolant: Locate and loosen the coolant drain valve at the bottom of the radiator until all the coolant has completely drained out. 2. Keep the car idling to completely drain the old coolant: Continuously add clean water into the coolant reservoir, allowing it to flush out any remaining coolant in the cooling system. Stop adding water when the flow becomes colorless, indicating that the old coolant has been completely removed. 3. Tighten the drain valve and turn off the engine: Add new coolant into the filler port until it reaches between the minimum and maximum level marks. If you accidentally add too much, start the engine again and let it idle. The air in the cooling system will be expelled, causing the coolant level to drop. Once the coolant level stabilizes, add more coolant until it is between the two marks again.
3
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.