How many kilometers can a Corolla 1.8 travel on a full tank of gas?

1 Answers
LauraLynn
07/30/25 4:38am
A Corolla 1.8 can travel approximately 500 kilometers on a full tank of gas, and around 700-800 kilometers when driving entirely on highways. Variations by model: Different cars have significant differences in fuel efficiency, with varying tank sizes. The primary factors are the vehicle's displacement and tank capacity. For example, a car with a 2.0-liter displacement typically consumes about 10 liters of fuel per 100 kilometers. With a tank size of 60-70 liters, such a car can travel 600-700 kilometers based on the above data. Variations in fuel consumption: After filling up the tank, most cars can generally travel around 500 kilometers. The size of the fuel tank correlates with the vehicle's fuel consumption—higher consumption means a larger tank, and vice versa. An average sedan usually has a fuel tank capacity of about 50 liters. If the fuel consumption is relatively economical at 8 liters per 100 kilometers, the car can travel over 600 kilometers. To achieve a range of 1,000 kilometers, the fuel consumption would need to be as low as 4-5 liters per 100 kilometers. Driving on national highways with heavy traffic and poor road conditions, where speeds are lower, tends to be less fuel-efficient. On highways, maintaining a consistent speed for extended periods allows the vehicle to perform optimally.
Was this review help?
5
4
Share
More Forum Discussions

What are the requirements for motorcycle registration in Panyu?

The requirements for motorcycle registration in Panyu are as follows: Provide proof of identity: Identity proof of the motor vehicle owner. Purchase certificate: Proof of origin of the motor vehicle such as purchase invoice, motor vehicle whole vehicle factory qualification certificate or import motor vehicle import certificate, vehicle purchase tax payment certificate or tax exemption certificate, motor vehicle traffic accident liability compulsory insurance certificate. Be at least 18 years old: The purchaser must be at least 18 years old and be a Chinese citizen with full civil capacity. Apply for a residence permit: You need to apply for a residence permit, and the applicant can go to the community service center of the current residence to apply.
4
5
Share

Will the Car Display Show Night Mode During the Day?

During the day, the car display will not show night mode; it automatically switches to night mode only in the evening. Below is an introduction to night mode: Definition of Night Mode: The car night vision system uses infrared technology to make darkness appear as bright as daylight, allowing drivers to see farther and more clearly at night. The night vision system consists of two parts: an infrared camera and a light display system on the windshield. Benefits of Night Mode: With this night vision device installed, drivers can see road conditions as clearly as during the day through the light display system. When two vehicles meet, it significantly reduces the adverse visual stimulation caused by the strong headlights of the oncoming car and enhances the driver's ability to discern road conditions in foggy conditions.
16
4
Share

Does changing a white car to laser white require registration?

Changing from pearl white to laser white does not require registration. Because the color difference between pearl white and laser white is not particularly significant, there is no need to go to the vehicle management office for registration. The exterior color of the car indicated on the vehicle license is only a rough designation and does not involve color changes. Similar color ranges: For example, there are many types of red, such as bright red, wine red, French red, etc., which are only labeled as red on the vehicle license. Similarly, white also comes in many varieties, such as taffeta white, pearl white, moon white, beige white, etc., but they are only labeled as white on the vehicle license. Registration is optional: Of course, if the owner is still concerned, they can go ahead and register without any issue. However, if the vehicle's color is changed from another color to white, such as from dark gray to red or from silver gray to sea blue, the color change is too significant, and registration is mandatory. This is no longer just a color change but a shift to a different color category, which requires registration. Otherwise, the vehicle will not pass the annual inspection.
17
3
Share

Do pickup trucks need to go through weighbridges on highways?

Pickup trucks do not need to go through weighbridges on highways. Legal regulations: According to the relevant regulations in January 2020, all trucks must pass through weigh-in-motion channels. Therefore, blue-plate trucks with ETC must go through weigh-in-motion channels when entering the highway. However, this weigh-in-motion channel refers to the entry point. Blue-plate trucks only need to be weighed when entering the highway and can freely choose the exit channel when leaving. Blue-plate truck ETC lanes: When entering the highway, blue-plate trucks need to pass through weigh-in-motion channels. When exiting the highway, they can choose the ETC lane if they have ETC; otherwise, they should use the truck lane.
6
1
Share

Is 5.5L/100km Fuel Consumption High?

Strictly speaking, a fuel consumption of 5.5L/100km is not considered high, as most vehicles on the market typically have fuel consumption levels ranging from 7 to 8 liters. Transmission's Impact on Fuel Consumption: The transmission is a power-speed regulation device connected between the engine output and the wheel drive shaft. Its basic functions are: changing the corresponding "power-speed" combination according to the vehicle's driving needs, altering the rotation direction (reverse gear), and disconnecting the engine from the drive shaft (idle). Design Factors Affecting Fuel Consumption: This mainly refers to the drag coefficient. Body design is not just about aesthetics but also considers the drag coefficient. The more streamlined and smoother the car design, and the smaller the body attachments, the more effectively the drag can be reduced. A lower drag coefficient results in lower wind resistance for the vehicle, better stability, and improved fuel efficiency. Generally, a 10% reduction in the drag coefficient can lead to a 3% decrease in fuel consumption.
6
3
Share

What is the wading depth of a pickup truck?

The maximum wading depth of a pickup truck can reach around 700mm. Definition of maximum wading depth: The maximum wading depth refers to the distance between the tire contact point and the engine air intake, known as Wattiefe in English. The maximum wading depth is the greatest depth a vehicle can safely pass through under safe driving conditions, also referred to as the safe depth. It is an important indicator for evaluating a vehicle's off-road capability. The greater the maximum wading depth, the stronger the vehicle's water-crossing ability. Methods to determine wading depth: When the water depth is one-third of the tire height, you can pass through with confidence. As long as you operate correctly, it will not cause unnecessary damage. When the water depth exceeds half of the tire height, caution is needed, as this situation can easily lead to water entering the vehicle. If the wading depth exceeds the bumper, you should remain highly vigilant while driving to avoid water entering the engine.
8
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.