How many kilometers can a car tire run under normal driving conditions?

1 Answers
LaDawson
07/29/25 8:53pm
It is generally recommended to replace tires after driving 40,000 to 60,000 kilometers, but this is only a reference value. The replacement time varies depending on individual driving habits, road conditions, and tire usage. Below is additional information: Wear indicators: Each tire has wear indicators on its tread, with a noticeable raised mark in the middle of the tread pattern. Even with good driving habits, when the tire wear approaches these indicators, it's time to replace the tire. Lifespan: Additionally, tires are made of rubber and have a lifespan. Typically, the lifespan of a tire is about 5 years. If this period is exceeded, even if the mileage is relatively low, the tires should be replaced promptly.
Was this review help?
3
5
Share
More Forum Discussions

How to replace the license plate bulb on a BYD F3?

The method to replace the license plate bulb on a BYD F3: Use a flat-head screwdriver to pry one end of the license plate bulb socket. If there is no movement, try prying the other end of the socket. Remove the old bulb and replace it with a new one. The license plate light is turned on at night or in dim lighting conditions along with the width indicator lights to illuminate the license plate. The BYD F3 is a model under BYD Auto, with body dimensions of 4533mm in length, 1705mm in width, and 1490mm in height, and a wheelbase of 2600mm. In terms of interior, the BYD F3 features a simple and elegant design with light-colored upholstery that gives a fresh feel. It comes with comprehensive and rich configurations, including leather seats and a reverse radar in higher-end models.
7
1
Share

How to adjust the clock on Nissan X-Trail's dashboard?

Nissan X-Trail dashboard clock adjustment method is as follows: 1. Press the setting button, select clock setting, and use the outer ring of the rotary button on the right side of the center color display to browse through the items. 2. Press the center of the button to confirm the selected setting, then rotate the button to adjust the setting for that item. 3. After setting, press the center of the button again until the color disappears, then repeat the above operation to adjust the next item. Here is more information: The small icons on the dashboard represent different meanings and can promptly reflect vehicle information, which is very important for car owners and should be fully understood and mastered. More and more car models are also replacing dials with digital displays, such as trip computers and LCD dashboards, which can display instantaneous fuel consumption, average fuel consumption, average speed, tire pressure, and fault warnings, making it easier for drivers to read and understand.
15
5
Share

What is the tutorial for replacing the battery in a Peugeot 2008?

The tutorial for replacing the battery in a Peugeot 2008 is as follows: Park the car and turn off the engine, open the engine compartment cover, locate the battery position, first remove the cable on the negative terminal of the battery, then remove the bracket that secures the battery, disconnect the positive terminal cable, remove the old battery, when installing the new battery, first connect the positive terminal cable, then connect the negative terminal cable, tighten the screws, and test the car after installation is complete. The Peugeot 2008 is a model under the Peugeot brand, with a body length, width, and height of 4159mm, 1829mm, and 1556mm respectively, and a wheelbase of 2538mm. The Peugeot 2008 is powered by a three-cylinder fuel direct injection gasoline engine, and also offers a diesel engine as an option.
8
0
Share

Why does the Audi steering wheel make abnormal noises?

Audi steering wheel makes abnormal noises for the following reasons: Friction between plastic parts: Especially in new cars, the steering wheel is composed of various plastic parts. If the mutual clearance is too small during steering, there will always be friction, which will wear off after a period of use. Friction between the steering column and floor mat: This is mainly because the aftermarket floor mat is too large and comes into direct contact with the steering column, causing friction as the steering column rotates. Failure of the clock spring in the steering wheel: This is due to a broken clock spring or an unplugged clock spring connector, which can be resolved by replacement or fixing. Aging of the steering tie rod end: Replace the steering tie rod end, but a four-wheel alignment is required after replacement.
13
3
Share

What Causes Water Leakage in the Middle Section of the Exhaust Pipe?

The reason for water leakage in the middle section of the exhaust pipe is that the vehicle's exhaust emission system has become loose. Under normal circumstances, water droplets should only appear at the tail end of the vehicle's exhaust emission system, and no other parts should experience water leakage. Water droplets from the exhaust pipe of a motor vehicle indicate that the engine is in good condition, as it represents water vapor produced after the ignition and combustion of a mixture of gasoline and air, which condenses into water droplets at the tail end. The exhaust pipe is part of the engine's exhaust system, which mainly includes the exhaust manifold, exhaust pipe, and muffler. Typically, the three-way catalytic converter, which controls engine pollutant emissions, is also installed in the exhaust system. The exhaust pipe generally consists of the front exhaust pipe and the rear exhaust pipe.
13
1
Share

Why does the hazard lights of Haval H6 flash several times when encountering bumps?

The reason why the hazard lights of Haval H6 flash several times when encountering bumps is: This is the intelligent hazard light activation of the vehicle. Bumps on the road may indicate potential sudden braking by the vehicle ahead, reminding the following vehicle to maintain a safe distance. Taking the 2021 Haval H6 Third Generation 2.0T Automatic Two-Wheel Drive Max as an example, it is a compact SUV under Great Wall Motors, with a gasoline energy type and meets the China VI emission standard. It is equipped with a 2.0T turbocharged engine, matched with a 7-speed dual-clutch transmission. The dimensions of the 2021 Haval H6 Third Generation 2.0T Automatic Two-Wheel Drive Max are 4653 mm in length, 1886 mm in width, and 1730 mm in height, with a 5-door, 5-seat SUV body type. In terms of the suspension system, the front suspension is a MacPherson independent suspension, and the rear suspension is a multi-link independent suspension.
19
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.