How many kilometers can a BMW X3 travel on a full tank of gas?

How to update ETC after vehicle transfer?

Go to the original ETC service outlet to handle the update, bringing the ETC card reader and ETC card (bank debit card), the original ID card of the ETC applicant, and the new vehicle license. The ETC non-stop toll collection system is currently the most advanced road and bridge toll method in the world.

11

0

Share

How to Replace the Rearview Mirror Assembly?

Use a wrench to pry off the surface casing of the damaged rearview mirror. Insert your hand behind the glass and pull outward to remove the mirror. Remove the four screws and detach the frame and rear shell. Prepare the new rearview mirror, align it with the screw holes, and tighten the screws.

16

2

Share

What is the appropriate tire pressure for Wuling Zhiguang?

The standard tire pressure for Wuling Zhiguang is 2.4-2.5 bar. Below are specific instructions for adjusting car tire pressure: 1. On roads with significant bumps, it is advisable to reduce the tire pressure by 0.1-0.2 bar from the standard tire pressure. For long-distance high-speed driving, the tire pressure should not be too low; it is recommended to increase the tire pressure by about 0.2 bar from the lower limit of the standard tire pressure. 2. For new tires, the tire pressure can be increased by about 0.2 bar from the standard tire pressure. For old tires, it is advisable to slightly decrease the tire pressure according to the standard, and if the tires are severely worn, use the lower limit of the standard tire pressure. 3. In winter, it is recommended to increase the tire pressure by about 0.2 bar based on the standard tire pressure. In summer, use the lower limit of the standard tire pressure. If the car is parked outdoors in summer, the tire pressure can generally be about 0.1 bar lower than the standard to prevent tire blowouts due to high temperatures.

8

2

Share

How to Replace the Spark Plugs on a Mazda Axela?

Mazda Axela spark plug replacement procedure: Open the hood, lift the plastic engine cover, remove the high-voltage ignition wires, and mark each cylinder's position to avoid confusion. Use a spark plug socket to remove the spark plugs one by one. During removal, check for external debris like leaves or dust and ensure thorough cleaning. Place the new spark plug into the spark plug hole, hand-tighten it for a few turns, then use the socket to fully tighten. Reinstall the high-voltage ignition wires according to the firing order and secure the cover. Spark plug replacement interval: Under normal maintenance conditions, replacement is recommended at 40,000-60,000 km. However, this may vary depending on the brand and engine type. Always consult the owner's manual. Maintenance reference standards: Platinum spark plugs at 40,000 km, standard nickel alloy spark plugs at 20,000 km, and iridium spark plugs at 60,000-80,000 km.

18

3

Share

What are the reasons for the Envision displaying reduced power?

Here are the reasons why the Envision displays reduced power: 1. Carbon buildup in the engine. 2. Fuel system malfunction. 3. Intake system malfunction. Here are the inspection methods for the Envision displaying reduced power: 1. Check whether the intake camshaft solenoid valve and the engine oil pressure solenoid valve are malfunctioning. 2. If a malfunction is found, it should be replaced promptly. Here are some extended tips for using a car engine: 1. Avoid driving in neutral. The engine itself has a fuel-cut function during deceleration, and driving in neutral is not conducive to fuel economy. 2. Pay attention to observation when using the vehicle. If oil is found on the ground, determine whether there is an engine oil leak and communicate with the car 4S shop in time to eliminate potential safety hazards. 3. For vehicles equipped with a turbocharger, do not turn off the engine immediately after high-speed driving or climbing a slope. Let it idle for 10 minutes before turning it off. 4. When brake fluid is mixed with or absorbs water, or impurities or sediments are found in the brake fluid, it should be replaced or carefully filtered in time.

18

2

Share

Where is the USB port located on the Hyundai ix35?

Hyundai ix35's original USB port is located on the small platform in front of the gear lever, at the position of the car's cigarette lighter. Here are some introductions about the Hyundai ix35: 1. The space of Hyundai ix35 is generally very good, the front row has a high seating position, and the head and legroom are very spacious. The 2.0 top model's seats can be manually adjusted for height, front and rear, and backrest angle. 2. The rear space of Hyundai ix35 is very distinctive, even tall people over 185cm can sit comfortably. In addition, the ix35 rear center seat does not have a headrest, and the overall seating feeling is not as soft as the front row, but the backrest can be adjusted for angle. As an SUV model, the visibility advantage is obvious compared to sedans. 3. The braking distance of Hyundai ix35 is 42.64 meters, which is considered medium among several SUVs. The front part of the brake pedal is slightly soft, while the rear part is very linear, which is good for urban driving with better comfort and no jerking due to unintentional light braking.

1

5

Share

How many kilometers can a BMW X3 travel on a full tank of gas?

How to update ETC after vehicle transfer?

How to Replace the Rearview Mirror Assembly?

What is the appropriate tire pressure for Wuling Zhiguang?

How to Replace the Spark Plugs on a Mazda Axela?

What are the reasons for the Envision displaying reduced power?

Where is the USB port located on the Hyundai ix35?

How to Solve the Issue of System Running Too Rich at Idle in Cylinder Bank 1?

What brand is the original Volkswagen car navigation system?

How to Change the Frequency Band of Car Bluetooth?

How to Independently Control the Rear Air Conditioning in a Passat?