How many kilometers can a BMW run in one hour?

What type of engine oil is suitable for Geely Borui 1.8T?

Geely Borui 1.8T uses fully synthetic engine oil. Below are the relevant details about fully synthetic engine oil: 1. Fully synthetic engine oil is a high-grade product among engine oils. 2. Fully synthetic engine oil is derived from ethylene and propylene dispersed from natural gas or gas in crude oil, which are then processed through complex chemical reactions such as polymerization and catalysis to form a lubricating fluid composed of large molecules. 3. Essentially, it utilizes the better components of crude oil, undergoes chemical reactions, and achieves the desired molecular structure under human control. The molecules of fully synthetic oil are neatly arranged, naturally providing strong resistance to external variables. 4. Therefore, it has superior qualities, with much better thermal stability, oxidation resistance, and viscosity change resistance compared to mineral oil and semi-synthetic oil, which is why it is also the most expensive.

10

0

Share

What Causes Turbocharger Oil Leaks?

Turbocharger oil leaks are caused by: aging oil seal rings, poor lubrication of the turbocharger, or turbocharger damage. First, inspect the oil seal rings. If the vehicle has been in use for a long time, some components may age. If the oil seal rings are aged, they need to be replaced immediately. The turbocharger also requires lubrication. If the internal components of the turbocharger are not properly lubricated, they can wear out easily. When the internal components are severely worn, oil leaks may occur. In such cases, the severely worn components must be replaced immediately, and lubricating oil should be added promptly. Normally, turbochargers do not fail. However, if the vehicle is involved in an accident while driving, which damages the turbocharger, oil leaks will definitely occur, and the turbocharger must be replaced immediately.

7

4

Share

How to siphon gasoline from a car fuel tank?

Methods for siphoning gasoline from a car fuel tank: 1. Drive the vehicle onto a steep slope, then turn off the engine and engage the handbrake. Since the bottom of the fuel tank is U-shaped, it's difficult to drain oil on flat ground; 2. Open the fuel tank and insert a plastic hose; 3. Put the other end of the plastic hose in your mouth and suck hard, being careful not to get gasoline in your mouth; 4. Once you see gasoline coming up, place the end of the hose into a container and let it drain naturally. Precautions for refueling: 1. Don't wait until the fuel warning light comes on to refuel; 2. Choose to refuel in the morning or evening; 3. Avoid filling the tank completely when driving in the city; 4. Don't refuel during thunderstorms.

9

1

Share

Operating Steps for Using a Vernier Caliper

The operating steps for using a vernier caliper are as follows: 1. Put on gloves and take out the vernier caliper, wipe the oil off the surface of the ruler with a cloth (to prevent the ruler from rusting), close it, and check whether the zero scale lines of the vernier and the main ruler are aligned. If they are aligned, measurement can be performed; if not, record the zero error. 2. During measurement, hold the ruler body with your right hand, move the vernier with your thumb, hold the object to be measured (external or internal diameter) with your left hand, and place the object between the external measuring jaws. When it fits tightly with the jaws, you can read the measurement (make sure both arms are close to the object). 3. When reading, first use the zero scale line of the vernier as a reference to read the millimeter integer on the ruler body.

11

3

Share

What is the main purpose of crankcase ventilation?

The main purpose of crankcase ventilation is to discharge the combustible mixture and exhaust gases that have leaked into the crankcase, thereby improving the vehicle's driving performance. During engine operation, the high-pressure combustible mixture in the combustion chamber and the burned gases will, to some extent, leak into the crankcase through the gap between the piston assembly and the cylinder, causing blow-by. The blow-by gases consist of unburned fuel vapor, water vapor, and exhaust gases, which dilute the engine oil, reduce its performance, and accelerate its oxidation and deterioration. The lower part of the cylinder block, where the crankshaft is installed, is called the crankcase. The crankcase is divided into the upper crankcase and the lower crankcase. The upper crankcase is cast integrally with the cylinder block, while the lower crankcase is used to store lubricating oil and seal the upper crankcase, hence it is also known as the oil pan.

1

2

Share

Why is the Lexus IS more expensive than the ES?

Lexus IS is more expensive than the ES mainly for the following reasons: 1. The structure from the C-pillar to the roof side has been optimized, and points have been added to the front side members to enhance body rigidity, improve sporty performance, and reduce noise and vibration. 2. The new 2.0-liter inline 4-cylinder gasoline turbocharger is equipped with an adaptive control function that judges the driving environment based on throttle opening and selects the appropriate gear according to the situation. 3. The lane recognition performance of the steering assist system "Lane Tracing Assist (LTA)" has been improved. During operation, AI technology is used by the camera for white line recognition, and the vehicle decelerates in advance based on the size of the curve. Additionally, adjustments can be made to maintain a constant lateral position when driving through curves.

18

4

Share

How many kilometers can a BMW run in one hour?

What type of engine oil is suitable for Geely Borui 1.8T?

What Causes Turbocharger Oil Leaks?

How to siphon gasoline from a car fuel tank?

Operating Steps for Using a Vernier Caliper

What is the main purpose of crankcase ventilation?

Why is the Lexus IS more expensive than the ES?

How early can the vehicle annual inspection sticker be obtained?

Where is the cabin air filter located in the Dongfeng Fengxing X3?

Will Washing the Car Remove the Wax?

How is the early vehicle inspection date calculated?