How many kilometers can a 72V 22Ah Black Gold battery run?

What are the causes of abnormal noise from the right rear shock absorber?

The causes of abnormal noise from the right rear shock absorber include oil leakage or bending of the shock absorber itself, aging or abnormal wear of the shock pressure bearing, deformation of the shock spring, damage to the balance rod rubber sleeve, loose fixation of the shock absorber, and gaps in the connecting ball joint, etc. Deformation of the shock spring: Due to the structure of the vehicle's shock absorber, the entire shock absorber is compressed when the vehicle passes over bumpy roads, thereby compressing the external spring. However, after the vehicle passes the bumpy section, the spring's elasticity will reset the shock absorber. During the compression and resetting process of the shock absorber, there will be accompanying hissing or puffing sounds, which are normal phenomena. Any other abnormal noises from the shock absorber should also be taken seriously and addressed. Loose fixation of the shock absorber: Abnormal noise from the shock absorber is caused by loose fixation, as long-term vibrations during driving lead to loosening of the fixing nuts. Tightening the fixing nuts can solve the problem. Wear of the rubber bushings at both ends of the shock absorber forms play at the fixing points, causing noise during vehicle operation. Replacing the rubber bushings can eliminate the fault. Lack of oil in the shock absorber can also cause abnormal noise. Check for oil leakage; if there is no leakage, add the specified amount of shock absorber oil as required.

7

0

Share

What is the impact of coasting in D gear on the transmission?

The impact of coasting in D gear on the transmission is that it puts a load on the transmission, and prolonged use can cause the clutch to overheat or wear out. Reasons for the impact: When the vehicle is in D gear with the brakes applied, the transmission is under load. To cope with this load, the engine also increases its load, meaning it increases fuel injection and raises the RPM. Some engines and transmissions are not well-matched, or the engine's power may have decreased, leading to shaking. For dual-clutch transmissions, the clutch is in a semi-engaged state during this time, and prolonged use can cause the clutch to overheat or wear out. How the transmission works: The transmission primarily applies the principle of gear reduction through gear transmission. In simple terms, the transmission contains multiple sets of gear pairs with different gear ratios. The act of shifting gears while driving involves the operation of different gear pairs within the transmission. For example, at low speeds, gear pairs with larger gear ratios are engaged, while at high speeds, gear pairs with smaller gear ratios are engaged.

10

3

Share

Under what circumstances will you be photographed for using a phone while driving?

Using a handheld phone while driving is not allowed. Electronic surveillance cameras monitor such behavior, and violations will be photographed and recorded, resulting in fines and penalty points. The cameras can capture the driver's face when photographing phone use, so only the driver can handle the penalty with their own driver's license. According to the "Road Traffic Safety Violation Scoring Management Measures" implemented on April 1, 2022, drivers who make or answer handheld phone calls or engage in other behaviors that hinder safe driving will be penalized with 3 points deducted and a fine ranging from 20 to 200 yuan. 【The manifestations of driving behavior】include slow-moving traffic, intermittent driving, waiting at traffic lights, etc. 【Behaviors that hinder safe driving, such as making or answering handheld phone calls】include using a handheld device to make or receive calls, or holding a phone or other electronic device to send/receive text messages or WeChat messages, watch videos on apps like Douyin, Kuaishou, or Weibo, or play games. Even if the phone is mounted on a holder, performing actions like sending/receiving messages, watching videos, browsing apps, or playing games by viewing or operating the device is similarly dangerous as it diverts attention to the screen, and thus is also considered a violation. However, using hands-free car phones, phone headsets, or speakerphone functions that do not require holding the device and do not affect safety is not considered a violation of handheld phone use. Although using Bluetooth is not penalized, it is still discouraged as it can distract the driver and compromise road safety.

9

2

Share

Which light setting should be used for the new Camry during daytime driving?

The Camry's daytime running lights do not have a separate switch. As long as the car is started and begins to move, the daytime running lights will automatically turn on. Here is a detailed introduction to daytime running lights: Daytime running lights (DRLs) are designed to signal the presence of the vehicle to others during the day. They are installed on both sides of the front end. DRLs are not for illumination but serve as signal lights. Here is additional information about the Toyota Camry: Exterior: The Toyota Camry features dual styling designs: Luxury and Sport, both inspired by Toyota's latest "Keen-Look" design language. The hybrid version is based on the Luxury trim, with light blue front and rear lights highlighting its identity. Interior: The interior adopts an asymmetrical design, with a Y-shaped curve on the dashboard. Soft-touch surfaces and metal accents use premium materials, and the instrument panel and center console feature a first-of-its-kind three-dimensional surface finish. Features: The Toyota Camry is equipped with the latest Toyota Safety Sense (TSS), including Pre-Collision System (PCS), Lane Departure Alert (LDA), Automatic High Beam (AHB), and Dynamic Radar Cruise Control (DRCC), providing enhanced driving assistance for safety.

3

1

Share

What Causes the Chery Tiggo 5 Engine to Burn Oil?

There are two main reasons that cause an engine to burn oil. Normal Wear: This is a normal phenomenon after the vehicle has been driven for a certain mileage. Abnormal Wear: Causes of abnormal wear include early wear due to product quality issues or improper usage. Reasons for early engine wear include: Using substandard engine oil, failing to replace engine oil and oil filters on time. Starting the engine with a heavy throttle when cold, operating the engine without sufficient oil for extended periods, or running the engine at high temperatures for prolonged durations. Prolonged operation under high load and high RPM (engine speed exceeding 4,000 RPM per minute). Operating in environments with poor air quality (excessive dust levels) or failing to replace the air filter on time. Insufficient oil pump pressure, low oil pressure, clogged oil passages, etc., can all reduce engine lifespan and lead to early wear.

12

5

Share

Which one is the K1 clutch in Volkswagen's dual-clutch system?

In a dual-clutch system, with the central flywheel as the boundary, the right half is the normally closed (engaged) K1 clutch. Overall structure of the dual-clutch mechanism: Clutch K1 actuator, inner main shaft, outer main shaft, clutch K1 thrust bearing control rod, clutch K2 coaxial actuator, clutch K2 thrust bearing, clutch K1 thrust bearing, clutch K1 thrust bearing cover The structure of K1 is similar to that of a manual transmission clutch, except that the clutch operation is performed by a hydraulic actuator located at the far left end of the main shaft via a pull rod through the shaft center. Actuator working principle: Oil pressure from the valve group causes displacement of the piston, which slides on the guide tube with low friction due to the inserted Teflon pad. The piston's action is transmitted through a dedicated rod to the thrust bearing, thereby disengaging the clutch. When the valve group no longer commands oil pressure, the diaphragm spring pushes the thrust bearing, which in turn causes the piston to retract via the control rod, restoring engagement conditions. When the valve group remains in the neutral position, the trapped oil is incompressible, preventing piston movement and thus maintaining its position. A dedicated Hall effect sensor transmits the piston position to the TCU control unit to monitor whether the odd-gear clutch is disengaged.

8

3

Share

How many kilometers can a 72V 22Ah Black Gold battery run?

What are the causes of abnormal noise from the right rear shock absorber?

What is the impact of coasting in D gear on the transmission?

Under what circumstances will you be photographed for using a phone while driving?

Which light setting should be used for the new Camry during daytime driving?

What Causes the Chery Tiggo 5 Engine to Burn Oil?

Which one is the K1 clutch in Volkswagen's dual-clutch system?

Does the steering gear need to be replaced if there is play?

What Causes Heavy Brakes and Failure to Start?

Must Fuel Additive Be Added to an Empty Tank?

Can Someone Else Substitute for Vehicle Inspection?