···
Log in / Register

How many kilometers can a 7260 lithium battery normally run?

4 Answers
AdrielDella
07/29/25 2:35pm

Range is influenced by many factors, such as the type and capacity of the lithium battery, road conditions, the type and power of the motor, and load capacity. Theoretically, a 1500W motor with a 7260 battery can run up to 170km. 1. Do not arbitrarily replace the charger: Avoid changing the charger randomly and do not remove the speed limit of the controller. 2. Protect the charger: To reduce costs, most current chargers are not designed with high shock resistance, so they should generally not be placed in the trunk or on the frame of the electric vehicle. In special cases where movement is necessary, the charger should be packed in foam plastic to avoid shock impacts. 3. Charge promptly: Sulfation begins after the battery discharges, and significant sulfation occurs within 12 hours. Timely charging can clear minor sulfation. If charging is delayed, these sulfation crystals will gradually accumulate and form coarse crystals. Ordinary chargers are ineffective against these coarse crystals, leading to a gradual decline in battery capacity and shortened battery lifespan.

Was this review help?
9
2
Share
MaxLynn
08/13/25 6:58am

The 7260 lithium battery sounds like it has a capacity of 72.6kWh, right? In the field of electric vehicles, the actual range of such batteries depends on the model and efficiency. Typically, a full charge can cover around 500 to 600 kilometers. For example, mainstream EVs like the BYD Han EV with a 75kWh version can run about 550 kilometers. From my own testing, city driving is more energy-efficient, but highway driving or carrying heavy loads will increase energy consumption. Differences in battery management systems also affect the range, so it's advisable to refer to the manufacturer's data and combine it with real-time monitoring via an app. Regular battery maintenance can extend the range, avoiding overcharging or excessive discharge. Note that low temperatures in winter can reduce battery efficiency by 10%-20%, so plan your trips in advance to ensure safe driving.

Was this review help?
1
0
Share
Expand All
Susan
10/11/25 3:18am

After driving an electric vehicle for several years, I find that this 72.6kWh lithium-ion battery can easily cover over 500 kilometers under normal conditions, but actual range depends on individual driving habits. For my daily commute in urban areas, it typically achieves around 550 km. However, frequent use of air conditioning or hard braking can reduce the range to about 450 km. During weekend trips with more mountainous roads, the battery drains faster, significantly decreasing the range. I recommend using navigation apps to simulate routes and estimate real-world mileage beforehand. The remaining range displayed by the onboard system isn't always accurate, so it's wise to adjust expectations based on charging frequency. Extreme temperatures also impact battery performance - using AC in summer can cut range by dozens of kilometers, which is why carrying an emergency power bank is essential.

Was this review help?
20
0
Share
Expand All
TylerLee
11/24/25 4:25am

The 72.6kWh lithium battery provides a range of 500-600 kilometers, but environmental factors have a significant impact. I've driven electric vehicles in northern winters where temperatures drop below zero, and battery efficiency decreases by about 15%, reducing the range to around 430 kilometers. High temperatures in summer with air conditioning also consume more energy, shrinking the range by 10%. Terrain variations like uphill acceleration drain the battery faster, causing a substantial drop in range during long-distance trips. Selecting eco driving mode can save some power, but stop-and-go traffic in cities tends to waste more. It's advisable to adjust travel plans based on weather forecasts or choose routes with dense charging station coverage as a precaution. To slightly extend battery life, avoid extreme temperature and humidity conditions during maintenance.

Was this review help?
15
3
Share
Expand All
More Forum Discussions

Can Secondary Ignition Be Detected?

Secondary ignition can be detected. If the vehicle stalls after driving through water and someone manually uses the starter to ignite and operate the engine, this is considered a secondary start. Precautions for driving through water are as follows: When encountering standing water on the road, slow down and assess the water level. If the water reaches two-thirds of the tire height, driving through it poses a certain risk, and it is advised not to force passage. Maintain a low speed when driving through water, as higher speeds can raise the water level, increasing the actual depth of the water. Additionally, ensure you do not stop, shift gears, or reduce throttle, maintaining medium-to-high throttle at low speed to pass through. If the engine stalls while driving through water, do not attempt to restart it. In such cases, it is likely that water has entered the engine, and restarting will only cause more severe damage.
10
1
Share

Why is Secondary Ignition Not Covered by Insurance?

Secondary ignition is considered a human-caused factor, and vehicle damages resulting from human causes are not covered by the insurance policy. Below is relevant information about secondary ignition: Introduction: During water wading, if water blocks the air intake and causes the vehicle to stall, attempting to restart the engine is referred to as secondary ignition. Precautions: It is important to note that even if the water on the road has receded, you should avoid attempting to restart the engine, as there may still be water in the intake pipe, and electrical systems may malfunction after being submerged. The best course of action is to contact a towing company. Do not try to save on towing fees at the risk of causing greater damage. When arranging for a tow, clearly communicate to the staff that the vehicle stalled during water wading. For easier towing, the towing company may shift the gear to neutral. Without understanding the situation, they might attempt to start the engine, so it is crucial to explain the circumstances clearly.
20
3
Share

What is the sequence for rotating car tires front to back?

Here is the introduction to the sequence for rotating car tires front to back: 1. Move the left front tire to the left rear position. 2. Move the right front tire to the right rear position. 3. Move the left rear tire to the right front position. 4. Move the right rear tire to the left front position. 5. Regular tire rotation ensures more even wear across all four tires. Tires are one of the most important components of a car, and their functions are as follows: 1. Support the entire weight of the vehicle, bear the load of the car, and transmit forces and moments in other directions. 2. Transmit traction and braking torque, ensuring good adhesion between the wheels and the road surface to improve the car's power, braking, and off-road performance. 3. Work with the car's suspension to cushion impacts during driving and dampen resulting vibrations. 4. Protect car components from severe vibrations and early damage, adapt to the vehicle's high-speed performance, reduce driving noise, and ensure driving safety, handling stability, comfort, and fuel economy.
9
0
Share

What are the differences between Junling and Kangling?

There are three main differences between Kangling (i.e., Jianghuai Kangling) and Junling (i.e., Jianghuai Junling). The specific differences between Kangling and Junling are as follows: 1. Different characteristics: (1) Features of Jianghuai Kangling: Jianghuai Kangling integrates sedan-like design concepts and manufacturing processes into economical light trucks, ensuring that domestic economical light trucks not only have good economic performance but also offer comfort, safety, and environmental friendliness, thereby elevating the quality and grade of domestic economical light trucks. (2) Features of Jianghuai Junling: As a cost-effective economical light truck, Jianghuai Junling Good Luck adopts the Isuzu 100P high-roof cab and large-curved windshield, providing an attractive appearance and broad visibility for safer driving. 2. Different tonnage: (1) Tonnage of Jianghuai Kangling: Kangling is a 1-1.5-ton grade product of Jianghuai light trucks. (2) Tonnage of Jianghuai Junling: The tonnage of Jianghuai Good Luck ranges from 0.7 tons to 2 tons. 3. Different uses: (1) Use of Jianghuai Kangling: Suitable for mid-range light trucks in short-distance and economically developed regions, with different power segments tailored to meet various transportation needs in rural markets. (2) Use of Jianghuai Junling: To adapt to the development of the individual economy, Jianghuai Junling light trucks timely launched the Junling mid-size light truck, mainly targeting the medium and short-distance intercity logistics market.
20
5
Share

What are the causes of brake light failure?

The causes of brake light failure include the following: 1. Brake system failure: Damage to the brake fluid pipe causing severe oil shortage in the brake system; low oil level in the brake fluid reservoir leading to failure of the float-type sensor, resulting in the brake warning light not illuminating or lighting up to indicate a brake system fault; severe wear of brake pads, pre-buried wire breakage causing brake system failure; the brake warning system itself failing; simple circuit faults such as short circuits and the generation of steam in the brake fluid pipes causing brake system failure. The solution to such brake system failures causing the brake light not to illuminate is to seek professional repair at a maintenance shop. 2. Brake bulb failure: Mainly refers to the brake bulb exceeding its service life, with current halogen brake bulbs having a lifespan of 1 2 years. To solve this type of problem, LED lights can be used instead, with a lifespan of 5 10 years, low power consumption, fast response speed, no delay in lighting up, and being environmentally friendly without pollution. 3. Brake switch failure: Mainly refers to poor contact of the switch behind the brake pedal. The solution for this type of brake light not illuminating is relatively simple—just replace the brake switch.
11
0
Share

What is the minimum speed for second gear?

The speed in second gear should not be lower than 10 km/h. A manual transmission car uses a manual shift mechanical transmission (also called manual transmission, MT) to adjust the vehicle speed. This means you need to manually move the gear lever to change the gear engagement position inside the transmission, altering the gear ratio to achieve speed variation. The gear-speed matching requirements during the driving test (Subject 3) are as follows: first gear allows 0-20 km/h, shift to second gear at 15-20 km/h; second gear allows 10-30 km/h, shift to third gear at 25-30 km/h; third gear allows 20-40 km/h, shift to fourth gear at 35-40 km/h; fourth gear allows 30-50 km/h, shift to fifth gear at 45-50 km/h.
16
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.