How many kilometers can 47 liters of fuel run?

What maintenance does a Volkswagen need at 100,000 kilometers?

Replace engine oil, oil filter, transmission fluid, spark plugs, cabin air filter, engine air filter, brake fluid, etc. Replace all vehicle fluids: Generally, a vehicle at 100,000 kilometers requires a major maintenance service, which includes replacing all vehicle fluids. This typically involves changing the engine oil, oil filter, brake fluid (replacement depends on condition, usually every 2 years or 40,000 kilometers, so it may not be necessary at 100,000 kilometers), coolant (replace every 8 years or 160,000 kilometers), power steering fluid, transmission fluid, transfer case fluid (depending on vehicle configuration), rear differential fluid (depending on vehicle configuration), spark plugs, engine air filter (as needed), and cabin air filter (as needed). Inspect the braking system: For a vehicle with 100,000 kilometers, in addition to the regular maintenance mentioned above, it is also necessary to inspect the braking system, including brake pads, brake discs, and the wear condition of the brake pads. Check if the tires have reached the wear limit, are aged, or damaged. Inspect the chassis components for any looseness or aging.

20

4

Share

Where is the temperature sensor located in the Audi A8?

There are two types of temperature sensors installed in the vehicle: the coolant temperature sensor and the intake air temperature sensor. The coolant temperature sensor is installed on the engine coolant passage, while the intake air temperature sensor is located inside the air cleaner housing, the surge tank, the air flow meter, or the intake manifold. Function of the coolant temperature sensor: It detects the engine coolant temperature. The sensor is fully enclosed and uses resistance changes to measure the water temperature. The signal voltage generated by the sensor is input to the ECU, which then controls the ignition timing, adjusts the fuel injection quantity, and manages the engine in real-time based on the coolant temperature to ensure normal operation under various conditions. Function of the intake air temperature sensor: Since changes in intake air temperature affect air density, the cooling intensity of hot wires or hot films, and the atomization of the air-fuel mixture, the intake air temperature sensor provides a signal to correct for these effects.

7

3

Share

What is the fuel consumption of the Outlander 2.0?

The Outlander 2.0 has 8 models. Among them, the 2021 facelifted 2.0L 2WD Enjoy Edition 7-seater, equipped with a 166-horsepower engine, has an NEDC fuel consumption of 7.5L per 100km. The 2021 facelifted 2.0L 2WD Enjoy Edition 5-seater, 2WD Travel Edition 5-seater, and Dynamic Edition 5-seater, all equipped with a 166-horsepower engine, have an NEDC fuel consumption of 7.4L per 100km. The 2.4L 4WD Dynamic Edition 5-seater, Premium Edition 5-seater, Premium Edition 7-seater, and Premium Edition 7-seater, equipped with a 192-horsepower engine, have an NEDC fuel consumption of 8.1L per 100km. The fuel tank capacity of different Outlander 2.0 models is the same. The distance that can be covered with a full tank of fuel is as follows: For models equipped with a 166-horsepower engine and NEDC fuel consumption of 7.5L or 7.4L per 100km, the fuel tank capacity is 63L. The distance that can be covered with a full tank is 63/7.5*100=840km or 63/7.4*100=851km. For models equipped with a 192-horsepower engine and NEDC fuel consumption of 8.1L per 100km, the fuel tank capacity is 60L. The distance that can be covered with a full tank is 60/8.1*100=741km. The fuel consumption of a car is directly related to five major factors: driving habits, the car itself, road conditions, natural wind, and environmental temperature. Specific factors that can increase fuel consumption are as follows: Driving habits: Aggressive driving, such as sudden acceleration, frequent overtaking, and not releasing the throttle in advance when approaching a red light, can increase fuel consumption. The car itself: Cars with larger engine displacements generally consume more fuel than those with smaller displacements because larger displacements usually mean higher power, requiring more gasoline to burn and perform work. Cars with greater weight also consume more fuel because greater weight requires more driving torque. Road conditions: Driving on dirt roads, muddy roads, soft surfaces, or mountainous roads increases resistance and fuel consumption. Natural wind: Driving against the wind or on windy days increases car resistance and fuel consumption. Low environmental temperature: When the engine block temperature is low during a cold start, the injected gasoline is less likely to atomize, requiring more gasoline to be injected for combustion, thus increasing fuel consumption. Additionally, at low temperatures, the engine computer controls the engine to run at higher RPMs to warm up, which also increases fuel consumption.

10

4

Share

What does a circle displayed on the Volkswagen Sagitar steering wheel indicate?

It is the electric power steering indicator light, which will turn off after the vehicle is started. Working principle of electric power steering indicator: It uses a flasher unit, which can be divided into three types based on structure: resistance wire type, capacitor type, and electronic type. The resistance wire type can be further categorized into thermal wire type (electrothermal) and vane type (spring-loaded). The electronic type includes hybrid (relay with contacts combined with electronic components) and fully electronic (relay-free). For example, the spring-loaded flasher utilizes the thermal effect of electric current, using thermal expansion and contraction as the driving force to make the spring plate produce sudden movements, thereby connecting and disconnecting contacts to achieve light flashing. Electric power steering indicator troubleshooting method: Turn on the turn signal switch. If neither left nor right turn signals illuminate, for this fault, turn on the headlights. If they work, it indicates the power circuit from the ammeter to the fuse is good. Then, use a wire with one end touching the power terminal of the flasher and the other end scratching against the ground. If sparks appear, it indicates the power supply is functioning properly.

1

0

Share

Do 4S shops use dry ice to clean engine carbon deposits?

4S shops have dry ice cleaning machines, which are currently very rapidly developing cleaning equipment in the cleaning industry. In the automotive cleaning sector, many car service providers and production factories are equipped with dry ice cleaning machines to clean cars, making it very easy to clean even the most troublesome engine parts. Here are the specific details: 1. Dry ice cleaning: Dry ice cleaning of engine carbon deposits is a relatively safe cleaning technology. This is because dry ice cleaning can thoroughly clean engine carbon deposits without damaging the engine or disassembling it. The process involves using compressed gas to spray dry ice particles onto the engine surface. Upon contact, the physical low-temperature properties of dry ice produce a freezing effect, solidifying the carbon deposits, while the forced gas impacts the carbon deposits from above. Cleaning engine carbon deposits is a common issue faced by all car owners. Dry ice cleaning does not require rapid engine disassembly, saving both time and costs. Cleaning the throttle and cylinders with dry ice takes about 2 minutes, and dry ice cleaning has no abrasive effect on metal or plastic components. 2. After dry ice cleaning of engine carbon deposits: You can clearly feel an increase in engine power and a decrease in fuel consumption, thereby solving engine vibration issues and addressing problems of increased fuel consumption.

11

0

Share

Can the 2020 Geely Emgrand remotely control window roll-up/down?

Geely Emgrand 2020 cannot remotely control window roll-up/down, but an automatic window closer can be installed. There are three modes for the automatic window closer: 1. Windows automatically start closing immediately after turning off the engine and removing the key. 2. Windows automatically start closing after turning off the engine, removing the key, and closing the driver's door. 3. Windows automatically start closing after turning off the engine, closing the door, and pressing the remote control. The standard sequence for window closing is: Driver's window, front passenger window, rear passenger window behind the front passenger, and rear passenger window behind the driver, in that order. Of course, individuals can freely choose and adjust the control lines of the automatic window closer for each window to change the closing sequence. Car owners can select the appropriate automatic window closing mode and sequence based on their own needs.

3

4

Share

How many kilometers can 47 liters of fuel run?

What maintenance does a Volkswagen need at 100,000 kilometers?

Where is the temperature sensor located in the Audi A8?

What is the fuel consumption of the Outlander 2.0?

What does a circle displayed on the Volkswagen Sagitar steering wheel indicate?

Do 4S shops use dry ice to clean engine carbon deposits?

Can the 2020 Geely Emgrand remotely control window roll-up/down?

Can You Shift Gears While Braking in a Manual Transmission?

What is the business scope of a Class III auto repair shop?

Why is there a strange noise when stepping on the brake in P gear of an automatic transmission?

What is the ignition channel number for the Volkswagen Polo?