How Many Kilometers Can 17 Liters of Fuel Run?

1 Answers
McDonovan
07/24/25 8:01pm
17 liters of fuel can typically run approximately 200 kilometers. Relevant information is as follows: 1. Introduction: A fuel consumption of 17L/100km means that 17 liters of fuel are consumed every 100 kilometers. The fuel consumption per kilometer can be calculated as 0.17L. Based on the latest fuel prices (taking Liaoning as an example), if using 92-octane gasoline at the current price of 6.75 yuan/L, the fuel cost per kilometer is: 6.75 yuan/L × 0.17L = 1.1475 yuan, approximately 1.15 yuan/km. If using 95-octane gasoline at the current price of 7.2 yuan/L, the fuel cost per kilometer is 7.2 yuan/L × 0.17L = 1.224 yuan, approximately 1.22 yuan/km. 2. Introduction: Gasoline possesses chemical energy. It is one of the most widely used light petroleum products and an important fuel for engines.
Was this review help?
8
2
Share
More Forum Discussions

What is the wiper size of Changan CS55?

The wiper size of Changan CS55 is 22 inches for the main driver's side and 14 inches for the passenger's side. Wipers, also known as windshield wipers, are devices used to remove raindrops and dust attached to the vehicle's windshield to improve the driver's visibility and enhance driving safety. Maintenance methods for wipers: 1. In winter when the weather is colder, car owners should immediately remove any accumulated water on the wiper blades and windshield after washing the car to prevent the wipers from freezing and failing to work properly. 2. Regularly check your wiper blades for cracks or damage. If any are found, replace them immediately to prevent the blades from scratching your car's windshield. 3. If the car is not used for a long time, avoid parking it outdoors. If outdoor parking is unavoidable, it is best to lift the wipers to prevent them from freezing to the windshield when snow melts. 4. After each use of the wipers, promptly remove any ice left on the blades. When leaving the car overnight, place a towel between the wiper blades and the windshield to prevent them from sticking together due to dew or frost.
15
2
Share

What is the normal tire pressure for the 2021 Emgrand?

The normal tire pressure for the 2021 Emgrand is between 2.4-2.5 bar. According to the international GBT2978-2008 standard, the recommended tire pressures for different types of tires are as follows: Standard tires: 2.4-2.5 bar; Reinforced tires: 2.8-2.9 bar; Maximum pressure: should not exceed 3.5 bar. Hazards of overinflated tires: Reduced friction and adhesion of the tires, affecting braking performance; Causes steering wheel vibration and deviation, reducing driving comfort; Accelerates uneven wear of the central tread pattern, shortening tire lifespan; Increases vehicle vibration, indirectly affecting the lifespan of other components; Excessive stretching of tire cords, reducing tire elasticity and increasing the load on the vehicle during driving; Decreased puncture resistance. Sharp objects like nails or glass can easily penetrate the tire, leading to internal cracks or blowouts. Hazards of underinflated tires: Increases friction with the road surface, leading to higher fuel consumption; Causes heavy steering and deviation, compromising driving safety; Increases movement of tire components, leading to abnormal heat due to excessive rolling; Reduces the functionality of cords and rubber, causing delamination or cord breakage and excessive friction with the rim, damaging the bead area and causing abnormal wear; Multiplies friction with the ground, rapidly increasing tire temperature, softening the tire, and drastically reducing strength. High-speed driving may lead to blowouts; Increases tire deformation, leading to sidewall cracks and excessive flexing, which generates heat, accelerates rubber aging, fatigues the cord layers, and breaks cords. It also increases the tire's contact area, accelerating shoulder wear.
10
2
Share

What are the body dimensions of the Mercedes-Benz GLC?

The body dimensions of the Mercedes-Benz GLC are 4765mm in length, 1898mm in width, and 1648mm in height, according to official data. The length of the Mercedes-Benz GLC refers to the distance between two vertical lines perpendicular to the vehicle's longitudinal symmetry plane and touching the outermost protruding parts at the front and rear of the vehicle. The width refers to the distance between two planes parallel to the vehicle's longitudinal symmetry plane and touching the outermost rigid fixed protruding parts on both sides of the vehicle. The height refers to the distance between the highest point of the vehicle and the vehicle's supporting plane. The Mercedes-Benz GLC is equipped with a 2.0T turbocharged engine, delivering a maximum horsepower of 258Ps, a maximum power of 190kW, and a maximum torque of 370Nm, paired with a 9-speed automatic transmission. There are national regulations regarding vehicle dimensions. According to the national standard "GB1589-89," the total width of a vehicle does not include side mirrors. The limitation on vehicle width is to provide sufficient lateral clearance for overtaking in adjacent lanes. This means that, under national standards, the significance of vehicle width data lies in ensuring enough space during overtaking, preventing accidents due to excessive width or situations where road markings are narrower than the vehicle's width. Additionally, national regulations stipulate that the total width of a vehicle must not exceed 2.5m to meet the requirements of public road usage.
8
4
Share

Which company does Porsche belong to?

Porsche is a subsidiary of Volkswagen Group. Here is relevant information about the Porsche 911: 1. Model Introduction: The Porsche 911 series was designed by Ferdinand Alexander Porsche; 2. Exterior Design: Features smooth body lines, rounded fenders, slanted oval headlights, and a retractable rear spoiler; 3. Model Classification: The Porsche 911 series includes the Carrera series, Targa series, as well as the Turbo series, Turbo S series, and GT series; 4. Powertrain Configuration: Equipped with a 3.8-liter horizontally opposed six-cylinder engine that delivers a maximum power output of 350kW at 8250rpm.
1
4
Share

How to Replace the Battery in a Mercedes-Benz C32 Key?

Method to replace the battery in a Mercedes-Benz C32 key: 1. Locate the sliding switch on the car key, slide it to open the mechanical key, and pull out the mechanical key. 2. Use the just-removed metal key to pry open the key cover, separating the key into 3 parts, which will reveal the battery location. 3. Remove the old battery, insert the new one, and close the key cover to complete the process. Here are some related details: 1. The Mercedes-Benz C-Class is the best-selling model in the family and the most comprehensive in terms of variants among all Mercedes-Benz series. The new C-Class sedan is equipped with active safety systems, intelligent lighting systems, preventive safety systems, passenger safety protection systems, and rescue tools, making it comfortable, refined, practical, and top-notch in safety. The C-Class sedan can take several measures based on the type and severity of an accident: automatically shutting off the engine and cutting off the fuel supply. Hazard warning lights and emergency interior lights are automatically activated, and if necessary, side windows are partially lowered and doors are automatically unlocked. 2. Handling performance is a major highlight of the Mercedes-Benz C-Class: the steering wheel is very light; the transmission is excellent, with smooth gear shifts, and the tires have good grip, but road noise is somewhat loud; the brakes are responsive, and the suspension system is firm yet flexible, allowing minimal body tilt during high-speed cornering, providing a comfortable driving and riding experience.
1
0
Share

How to Remove the Fuel Pump of Honda Fit?

The steps for removing the fuel pump of Honda Fit are as follows: 1. First, remove the rear seat of the Honda Fit, use a flat-head screwdriver to pry off the cover plate of the fuel pump, and then take off the cover plate. 2. Remove the rear seat of the Honda Fit, and use a flat-head screwdriver to pry off the cover plate of the fuel pump. 3. Take off the cover plate of the fuel pump. 4. Unplug the connector of the fuel pump. 5. Remove the fuel inlet pipe of the Honda Fit. 6. Take out the entire fuel pump of the Honda Fit, and install the new fuel pump in the original position by reversing the removal steps to complete the operation. Additional notes: During the removal and installation process, ensure there are no open flames or sparks nearby. When installing, there are two very small oil drain holes on both sides of the center of the fuel pump base; avoid oil dripping. Since the fuel pump is immersed in gasoline for a long time, the sealing rings are prone to aging. When installing the fuel pump, be sure to check whether the sealing rings on the inlet and outlet pipes are aged or worn, and ensure they are properly installed.
14
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.