How Many Kilograms is One Liter of 95 Gasoline?

2 Answers
VanDaniel
07/28/25 4:06pm
1.5 kilograms. According to the density conversion of gasoline, the density of 95 gasoline is 0.737g/ml, so one liter of 95 gasoline is approximately equal to 0.75 kilograms, which is 1.5 kilograms. The density of different grades of gasoline varies. For example, the density of 93 gasoline is 0.725g per milliliter, and the density of 97 gasoline is 0.737g per milliliter. Here is some additional information: Gasoline: Gasoline is a fuel that every car must add. Without fuel, there is no power. Precautions: The first is the time of refueling. It is best to refuel in the morning or at night, because the temperature is high at noon, and thermal expansion and contraction will cause the volume of gasoline to expand, resulting in less fuel being added. The second is not to make phone calls while refueling, because making phone calls may generate sparks, which can easily cause a fire when in contact with the dense gas at the gas station.
Was this review help?
17
5
Share
Clinton
08/11/25 11:11pm
As a frequent driver, I often wonder about the weight of 95-octane gasoline per liter when refueling. After checking the data, I found its density is approximately 0.74 grams per milliliter. The calculation is straightforward: one liter (1000 milliliters) multiplied by the density equals 740 grams, which converts to 1.48 jin (a Chinese unit of weight, 1 jin = 500 grams), commonly rounded to 1.5 jin. This information is quite practical. For example, my car has a 50-liter fuel tank, and filling it up is equivalent to adding a 75-jin weight. The increased vehicle weight may raise fuel consumption by 1% to 2%, a minor but cumulative effect. In daily car use, it's helpful to clean out the trunk and reduce unnecessary items to save money. I also learned that temperature affects density—higher in winter and lower in summer—causing weight fluctuations between 1.42 and 1.56 jin. Developing small habits, like not filling the tank completely to leave room for expansion, can prevent waste. These little tips make driving more efficient and help friends understand fuel prices and usage techniques.
Was this review help?
11
3
Share
Expand All
More Forum Discussions

Should Both the Towing and Towed Vehicles Turn on Their Hazard Warning Flashers?

Towing vehicles and towed vehicles should both turn on their hazard warning flashers. According to Article 61 of the "Implementation Regulations of the Road Traffic Safety Law of the People's Republic of China," the following provisions must be observed when towing a motor vehicle: 1. The towed motor vehicle must not carry passengers other than the driver and must not tow a trailer; 2. The width of the towed motor vehicle must not exceed the width of the towing motor vehicle; 3. When using a soft connection towing device, the distance between the towing vehicle and the towed vehicle should be more than 4 meters but less than 10 meters; 4. For a towed vehicle with failed brakes, a hard connection towing device must be used; 5. Both the towing vehicle and the towed vehicle should turn on their hazard warning flashers. Truck cranes and wheeled special-purpose machinery vehicles are not allowed to tow other vehicles. Motorcycles are not allowed to tow vehicles or be towed by other vehicles.
19
4
Share

What is the fuel consumption of the Focus?

Ford Focus fuel consumption is 6.4L/100km. Below is the relevant introduction of Ford Focus: 1. Exterior: The vehicle adopts crossover-style body cladding, including a new front bumper design, adding black wheel arches and side skirts along with silver underbody protection. Regarding wheels, the base model comes with 17-inch five-spoke aluminum alloy wheels, while the premium model features the same 18-inch five-spoke dual-tone alloy wheels as the overseas version, equipped with LED headlights. 2. Configuration: Equipped with Ford Co-Pilot360™ intelligent driving assist system, including ACC full-speed adaptive cruise control, parking assist system, pre-collision assist with automatic emergency braking, traffic sign recognition, and lane keeping assist.
11
1
Share

Which turn signal should be used when exiting a parking space?

When exiting a parking space, use the left turn signal for a left turn and the right turn signal for a right turn. Overview of car turn signals: Car turn signals refer to the flashing indicator lights that are activated when a vehicle is turning, to alert pedestrians or vehicles in front or behind about the intended direction of travel. They can be categorized by material into traditional car turn signals and LED car turn signals. By location, they can be divided into front turn signals, rear turn signals, and side turn signals. Principle of car turn signals: The lamp tubes use xenon tubes, controlled by a microcontroller circuit, with alternating left and right flashes working continuously. Turn signal flashers can be classified into three types based on their structure: resistance wire type, capacitor type, and electronic type.
5
0
Share

What is the normal pressure for an automotive Freon gauge?

For automotive air conditioning refrigerant charging, the low pressure should be between 1.5 to 2.5 kg, and the high pressure should be between 13.5 to 15.5 kg. The following is relevant information about Freon: 1. Introduction: Freon, also known as Fluorine, originates from the English word 'Freon', which is a registered refrigerant trademark of DuPont in the United States. In China, there are differing definitions of Freon, generally referring to the collective term for halogenated derivatives of saturated hydrocarbons (mainly methane, ethane, and propane). According to this definition, Freon can be categorized into four types: CFC, HCFC, HFC, etc. Some scholars define Freon specifically as CFC refrigerant. 2. Main Uses: Freon is widely used as a refrigerant, foaming agent, and cleaning agent, extensively applied in household appliances, foam plastics, daily chemical products, automotive, firefighting equipment, and other fields.
4
3
Share

What are the hazards of engine oil pressure failure in the Peugeot 408?

The hazards of engine oil pressure failure in the Peugeot 408 are engine wear and even failure. It is essential to promptly inspect and replace any damaged components. Below is a detailed introduction about the Peugeot 408: 1. Overview: The Peugeot 408 is a compact car launched by Dongfeng Peugeot on January 25, 2010, equipped with mainstream engines from the DPCA (Dongfeng Peugeot Citroën Automobile) company. It offers two engine displacement options: 2.0L and 1.6L. The body structure is a three-box sedan with a length of 4750mm, width of 1820mm, and height of 1488mm. 2. Safety: The Peugeot 408 features a unique 6+X safety system, providing a high safety coefficient. This system includes EVA emergency braking assistance, Bosch 8.1 version ABS anti-lock braking system, EBD electronic brake-force distribution, TSC traction control, and ESP electronic stability program.
8
1
Share

What is the reason for the lack of power after stepping on the accelerator in the BYD Qin?

The reason for the lack of power after stepping on the accelerator in the BYD Qin is a clogged car fuel filter or abnormal operation of the car fuel pump. Below is a detailed introduction about the BYD Qin: 1. Overview: The BYD Qin is a high-performance sedan independently developed by BYD Co., Ltd., featuring the second-generation DM technology (switching between pure electric and hybrid modes). Since partnering with Germany's Daimler, BYD's vehicle manufacturing process has significantly improved. 2. Other specifications: The wheelbase is 2670mm. The vehicle dimensions are 4740mm × 1770mm × 1480mm. The trunk volume is 300L. The fuel consumption is 1.6L/100km (hybrid mode). The fuel tank capacity is 50L. The engine type is a 4-cylinder 1.5T direct fuel injection and electric drive. The maximum speed is 185km/h. The drive type is front-engine, front-wheel drive.
14
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.