···
Log in / Register

How many interior styles does the 7th-generation Elantra have?

4 Answers
OAutumn
07/29/25 6:06pm

The 7th-generation Elantra offers three interior styles. Here are some relevant details about the Elantra: 1. Exterior Introduction: The domestically produced 7th-generation Elantra largely retains the design of the overseas version, featuring an overall avant-garde style. It includes two sizes, three types of wheel rims, a rear ducktail spoiler, wing-shaped rear bumper, a 1.4T model-exclusive diffuser, and a single-sided dual exhaust pipe, significantly enhancing its sporty feel. Additionally, the 7th-generation Elantra comes in six body colors: Polar White, Phantom Black, Iceberg Blue, Space Gray, Vibrant Orange, and Flame Red. In terms of dimensions, the 7th-generation Elantra boasts a car length and wheelbase that far exceed those of its peers, offering superior interior space. 2. Performance Introduction: The 7th-generation Elantra provides two powertrain options. One is a 1.4T turbocharged engine paired with a 7-speed dual-clutch transmission, delivering a maximum power of 103kW (140PS) and a peak torque of 211N·m. The other is a 1.5L naturally aspirated engine + CVT continuously variable transmission version, with a maximum power of 84.5kW (115PS) and a peak torque of 143.9N·m.

Was this review help?
2
1
Share
MariaRose
08/14/25 10:19am

As far as I know, the 7th-generation Elantra offers at least three main interior styles to cater to different needs. As a daily user, I've noticed that the base version typically features minimalist fabric seats, mainly in black, paired with a small-sized screen, emphasizing practicality. The mid-range version upgrades to leather-stitched seats with beige or gray options, adding a large touchscreen and an advanced infotainment system to enhance the driving experience. The top-tier version, on the other hand, boasts full leather interiors, optional red stitching and wood-grain accents, along with ambient lighting and advanced driver-assistance features, delivering a luxurious and comfortable feel. Each style has its own distinct characteristics in terms of materials and technology, allowing buyers to make a choice based on budget and personal preference. Regular interior maintenance can also extend its lifespan and keep it fresh—simple practices like frequent seat cleaning to prevent stain buildup can go a long way in hassle-free upkeep.

Was this review help?
9
3
Share
Expand All
MacReagan
10/14/25 4:09am

From a practical perspective, the 7th-generation Elantra generally offers three interior styles: Standard, Comfort, and Luxury. The standard interior features a predominantly dark color scheme with fabric seats that are stain-resistant and easy to maintain, making it ideal for daily family commutes. The Comfort version introduces soft-touch materials and a larger control screen, with more diverse color options such as light blue accents, creating a warm yet tech-savvy ambiance. The Luxury variant emphasizes premium quality, featuring genuine leather upholstery and metal trim for an elevated tactile experience. The price difference affects interior choices—the Standard version offers great value for budget-conscious buyers, while upgraded versions add features like wireless charging. Don't forget to test the seat firmness during your selection; it's crucial for long-distance driving comfort, which is a key aspect of interior ergonomics.

Was this review help?
17
4
Share
Expand All
MacTucker
11/27/25 5:04am

I have experienced the seventh-generation Elantra, which offers approximately three interior styles: the base model leans towards a sporty design with fewer color options but clean lines; the mid-range model provides more variety, including optional two-tone combinations; the high-end version is more refined, featuring leather and smart configurations. There is a rich selection of color variations, with darker shades being more stain-resistant and lighter tones making the space appear larger. The interface is intuitive while driving, making it easy to use.

Was this review help?
4
3
Share
Expand All
More Forum Discussions

How to turn on the air conditioning in a Santana 2000?

Methods to turn on the air conditioning in a Santana 2000: 1. Cool air: Press the AC button to activate the air conditioning, turn the temperature control knob to the blue side for cool air, adjust the fan speed and set the temperature. Move the fan speed switch to 0 to turn off the air conditioning. 2. Warm air: By default, it uses engine heating, so there's no need to press the AC button. Turn the temperature control knob to the red side for warm air. Regardless of whether the air vent is open, simply turn the internal circulation knob to the off position to turn off the warm air. The Santana 2000 measures 4546mm in length, 1710mm in width, and 1427mm in height, with a wheelbase of 2548mm, front track of 1414mm, rear track of 1422mm, and a minimum ground clearance of 138mm.
13
1
Share

How often should I start the car if it's not being driven?

If the car is not being driven, it should be started at least once every two weeks. After starting the engine, shift gears and drive the car for a short distance, which is beneficial for both the vehicle and the battery. When a battery does not receive a charge for an extended period, the sulfation process of the battery plates accelerates, increasing internal resistance and reducing battery life. When a car remains idle for a long time, most of the lubricating oil that should be coating the moving parts will flow back into the oil pan due to gravity, reducing lubrication in critical areas. Without the protective oil film, metal parts are prone to react with oxygen, forming an oxide layer that increases friction and makes starting the engine difficult. Additionally, due to the self-discharge effect of the battery, the terminal voltage may drop below 85%, potentially causing irreversible damage to the battery.
1
3
Share

Is It Normal for a Car's Exhaust Pipe to Drip Water?

It is normal for a car's exhaust pipe to drip water. This phenomenon is not caused by internal component damage leading to leakage, but rather by the water vapor produced during gasoline combustion. The water vapor accumulates in the exhaust pipe, cools down, and then drips out, indicating that the engine is functioning properly and the combustion is efficient. However, if the dripping is excessive, it may indicate a problem with the car. Typically, this occurs when coolant from the engine leaks into the combustion chamber, causing water to leak from the exhaust pipe. If not repaired promptly, excessive water accumulation can damage internal components, affect fuel supply accuracy, and even corrode the pipes. Therefore, if you notice any abnormalities, it is advisable to promptly visit a 4S shop or a professional auto repair shop for inspection.
5
5
Share

For a compression ratio of 10, should I use 92 or 95 octane gasoline?

Whether to use 92 or 95 octane gasoline for your car primarily depends on whether the vehicle is compatible with 92 octane (as indicated on the fuel tank cap). Then, the decision should be based on the engine's compression ratio. For an engine with a compression ratio of 10:1, both 92 and 95 octane gasoline can be used. If the compression ratio is below 11, 92 octane gasoline is suitable, whereas a compression ratio above 11 is better suited for 95 octane gasoline. Gasoline Octane Rating: The octane rating of the gasoline you use should match the manufacturer's specifications. The octane rating merely represents a parameter of the gasoline's anti-knock properties; a higher number indicates better anti-knock performance and has no relation to purity. The anti-knock properties of gasoline are somewhat related to engine operation. Generally, household car engines have lower compression ratios and thus use 92 octane gasoline with lower anti-knock properties. Precautions for Changing Gasoline Octane Rating: If you need to switch gasoline octane ratings, you can do so directly. However, when switching from a higher to a lower octane rating, it's advisable to wait until the fuel gauge light comes on (i.e., when the needle is in the red zone) before refueling with the lower octane gasoline.
12
0
Share

Where to Find the Vehicle Frame Number?

Most vehicle frame numbers are located in the engine compartment, on the left side of the dashboard, or at the lower left corner of the windshield. The frame number, abbreviated as VIN, is a unique set of seventeen letters or numbers used to identify the manufacturer, engine, chassis serial number, and other specifications of the vehicle. The frame number and engine number are like the ID numbers of a car, essential from the moment of purchase for tasks such as vehicle registration, obtaining a driving license, insurance, road maintenance fees, and annual inspections. Any procedure related to the vehicle requires these two numbers. Altering the frame number or engine number is prohibited; any changes must be reported and recorded at the vehicle management office.
5
1
Share

What Are the Main Factors That Determine a Car's Braking Distance?

Braking distance is one of the key parameters to measure a car's braking performance. It refers to the distance traveled by the vehicle from the moment braking begins until the car comes to a complete stop when the vehicle is at a certain speed. In other words, it is the distance covered by the car from the instant the driver presses the brake pedal hard until the vehicle fully stops at a given initial speed. The magnitude of braking force depends not only on the travel distance of the brake pedal but also on the adhesion coefficient between the wheels and the road surface. The smoother the road (e.g., icy surfaces), the lower the adhesion coefficient, resulting in a longer braking distance. Below is an introduction to brake pedal operation: Introduction to Brake Pedal Operation: Car brake pedal operations can be categorized into gentle braking (i.e., anticipatory braking), emergency braking, combined braking, and intermittent braking. Under normal circumstances, whether performing gentle braking or emergency braking, the clutch pedal should be fully depressed before the wheels lock up and the car stops to prevent the engine from stalling and to facilitate gear shifting. Proper Timing and Force Application in Braking: Generally, avoid stomping the brake pedal all at once. Instead, press the brake pedal first, adjusting the foot pressure (i.e., increasing or decreasing force) as needed. When driving at higher speeds, apply the pedal quickly and firmly; at lower speeds, press it gently and steadily. Then, adjust the pressure further based on varying conditions.
4
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.