How many hours does the first maintenance for a Mercedes-Benz take?

1 Answers
McReed
07/30/25 4:54am
Mercedes-Benz first maintenance takes about 2 hours. Pay attention to maintenance time: Pay attention to maintenance time. When consumers pick up their cars, the staff at the 4S store will inform them of the first maintenance time and mileage; the vehicle's first maintenance time and mileage will also be stated in the car's maintenance manual. You can perform the first maintenance according to the marked information. Pay attention to the engine oil used in the first maintenance: Since the vehicle is in the running-in period, the components have not been fully run-in, and impurities may appear during use, affecting the performance of the engine oil. It is necessary to replace the engine oil in time during the first maintenance to avoid a decline in the performance of the engine oil.
Was this review help?
6
5
Share
More Forum Discussions

How to manually close the Mazda6 sunroof?

The method to manually close the Mazda6 sunroof is: Press the sunroof close button located near the front-row reading lights on the car ceiling. Functions of the sunroof: 1. Changes traditional ventilation methods; 2. Prevents exhaust fumes from entering the vehicle; 3. Reduces wind noise; 4. Quickly lowers interior temperature; 5. Rapidly removes interior fogging; 6. Expands field of vision. Taking the 2015 Mazda6 as an example, its body structure is a 4-door 5-seater sedan with dimensions: length 4670mm, width 1780mm, height 1435mm, wheelbase 2675mm, fuel tank capacity 64L, and curb weight 1386kg.
5
2
Share

What is the 0-100 km/h acceleration time of the Haval H6?

The 0-100 km/h acceleration time of the Haval H6 is 10.64 seconds, which is a direct reflection of the car's power. Taking the 2021 Haval H6 as an example, it belongs to the compact SUV category, with body dimensions of 4653mm in length, 1886mm in width, and 1730mm in height, and a wheelbase of 2738mm. The 2021 Haval H6 features a MacPherson strut independent front suspension and a multi-link independent rear suspension. It is equipped with a 2.0L turbocharged engine, delivering a maximum horsepower of 211 PS, a maximum power of 155 kW, and a maximum torque of 325 Nm, paired with a 7-speed dual-clutch transmission.
14
2
Share

What is the indicator for low coolant?

The indicator for low coolant is a small sailboat-like symbol on the dashboard. The functions of automotive coolant are: 1. To provide anti-corrosion protection for the engine's cooling system; 2. To prevent the engine water from boiling when the temperature reaches 100 degrees Celsius; 3. To prevent the formation of scale, which can reduce the radiator's cooling efficiency; 4. To ensure the engine operates properly in low temperatures. The method for replacing coolant is: 1. Open the vehicle's engine hood, and the coolant reservoir can be seen in the upper right corner; 2. Open the coolant drain plug under the radiator to drain the old coolant; 3. Add new coolant, tighten the cap, and the coolant replacement is complete.
6
1
Share

Do You Need to Press the Brake When Shifting to N Gear at a Red Light in an Automatic Transmission?

When shifting to N gear at a red light in an automatic transmission, you need to press the brake. The gear positions in an automatic transmission car, from top to bottom, are: P gear for parking, R gear for reverse, N gear for neutral, D gear for drive, S gear for sport mode, L gear for low speed, and OD gear for overdrive. The steps to start an automatic transmission car are: 1. Turn the ignition key to the power position; 2. Press the foot brake and shift the gear from P to N; 3. Release the foot brake to start the engine; 4. Warm up the car while stationary; 5. Press the foot brake, shift the gear from N to D, and release the handbrake; 6. Slowly release the foot brake and gently press the accelerator to start smoothly.
12
1
Share

What is the method for bleeding brake fluid?

The methods for bleeding brake fluid are: 1. Connect a bottle filled with water to the drain port using a hose, then have one person press the brake pedal inside the vehicle while another observes whether the dirty fluid has been completely drained. Add new brake fluid and continue pressing the brake pedal until clear new fluid comes out of the drain port and no bubbles appear in the water bottle. 2. Use a vacuum oil extractor to suck out the brake fluid from the drain port, then add new brake fluid and continue extracting until the discharged fluid is clear and free of air. Situations requiring brake fluid replacement include: 1. When the brake fluid absorbs moisture or contains impurities; 2. When the vehicle experiences inconsistent braking performance during normal driving, the brake fluid should be promptly replaced; 3. When the wheel cylinder rubber cup expands excessively; 4. Brake fluid should be replaced every two years.
15
3
Share

What is the range of the Venucia e30 in kilometers?

The Venucia e30 has a range of 271 kilometers, which may vary depending on individual driving habits and the use of electrical equipment. Taking the 2020 Venucia e30 as an example, it is a compact SUV with body dimensions of 3732mm in length, 1579mm in width, and 1515mm in height, and a wheelbase of 2423mm. Its curb weight is 921kg. The 2020 Venucia e30 features a MacPherson independent front suspension and a torsion beam non-independent rear suspension. It is equipped with a permanent magnet synchronous motor, delivering a maximum power of 33kW and a maximum torque of 125Nm, paired with a single-speed fixed gear ratio transmission.
9
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.