···
Log in / Register

How many hours does it take to fully charge the Ora R1 at home?

4 Answers
DiBrynlee
07/24/25 6:06pm
Ora R1 at home charging time should be calculated according to the charging method, the following details: 1. The official announcement that the car in the fast charging mode, the battery from 30% to 80% of the time is 40 minutes, according to this calculation, its maximum fast charging power is about 25kw. 2. In slow charging mode, it takes 10 and a half hours to charge the battery from 0 to 100%, and a slow charging pile with a charging power of at least 3.2kw is required. 3. The 220V slow charging line of Ora R1 is 2.86kw, if it is used for charging, it takes about 11 and a half hours to fully charge the whole battery.
Was this review help?
15
1
Share
LeCharles
08/10/25 8:25am
I've been driving the Ora R1 for almost a year now and have plenty of home charging experience. Using a regular wall socket (the 110V type), the charging power is only about 1.4 kW, taking over 20 hours to go from completely empty to full charge—way too slow and frustrating. Later, I installed a home charging station (the 220V, 7 kW type), which is much faster, taking roughly 4 to 5 hours for a full charge. For example, if the car has only 20% battery left after work, I plug it in at 6 PM when I get home, and by 10 PM, it's fully charged without any delay for the next day's trip. Charging time is also affected by weather—it's faster in hot summers and slower in cold winters. Personally, I recommend using a charging station directly, especially since the Ora R1 has a 33 kWh battery—higher power means better efficiency. Now, with electricity being cheap, I save hundreds of dollars every month compared to driving a gas car—practical and economical.
Was this review help?
4
1
Share
Expand All
JessicaAnn
09/26/25 2:50am
I'm fascinated by electric vehicle technology and have thoroughly researched the home charging time for the Ora R1. With a battery capacity around 33kWh, using a standard household slow charger (1.4kW power) takes over 24 hours for a full charge, which is quite inefficient. However, upgrading to a 7kW charging station reduces the time to just 4-5 hours, thanks to the fivefold increase in power. From my actual tests: charging from 0% to 80% takes only 3 hours, with the remaining 20% charging even faster. The charging process is temperature-regulated - batteries charge quicker in warm weather when they're more active, and slightly slower in cold conditions. The vehicle's BMS (Battery Management System) also plays a crucial role in ensuring safety and preventing overcharging. Typically, I stop charging at full capacity to prolong battery life. I believe choosing the right charger is key - a 7kW station with 220V power supply is ideal, allowing for a full charge that's perfect for short road trips.
Was this review help?
8
0
Share
Expand All
NevaehRose
11/09/25 4:53am
I bought the Ora R1 for convenience, and charging at home is super easy. After installing a home charging station, it takes about 4 hours to fully charge. I plug it in at 9 PM, set a timer, and it automatically stops by 1 AM. Using just a wall socket is too slow, taking over 10 hours. The charging station has a 7kW power output, which is highly efficient, and the battery management system automatically adjusts the speed to prevent overheating. I usually start charging when the battery is half empty, and it takes just two hours, so I don’t waste the whole night. Temperature changes have minimal impact, with slightly faster charging in summer. The best part is the car screen clearly displays the remaining charging time. I think driving an electric car should be this hassle-free—charge up and commute around the city, quiet, eco-friendly, and stylish.
Was this review help?
20
5
Share
Expand All
More Forum Discussions

Can the Headlight Vent Be Blocked?

No, it cannot be blocked. The headlight vent is a properly designed component that maintains the air pressure balance inside and outside the headlight, preventing damage caused by excessive internal pressure. It also helps extend the headlight's lifespan. The function of the headlight vent: In terms of the overall structure of the headlight, whether it's a standard halogen headlight, a xenon headlight, or an LED headlight, there is a venting rubber tube located at the rear cover. When the headlight is turned on or during use, it generates a significant amount of heat. The vent tube helps dissipate this heat as much as possible to maintain the headlight's normal operating temperature and ensure stable performance. Disadvantages of the vent: Moisture in the air can enter the headlight through the vent and condense on the lens. As moisture accumulates, water droplets may form and flow down the lens.
15
0
Share

What cleaning agent should be used for DIY car washing?

Car washing should use specialized automotive cleaning agents. There are brands like Turtle Wax and Red Power available on the market. When purchasing, ensure the cleaning agent is pH-neutral. Neutral cleaning agents protect the car paint from damage during washing, are gentle on the skin, and often contain wax components that help preserve the paint surface. Remember, never use laundry detergent as a substitute for car cleaning agents, as laundry detergents are alkaline and can corrode the car paint. More details are as follows: Do not randomly clean the engine compartment: Because the engine compartment is filled with components like circuit boards, carelessness can easily damage high-voltage packs and circuit boards. Therefore, be extra cautious when washing the car yourself, especially avoiding the use of high-pressure water jets. Cleaning frequency: There's no need to wash the car too frequently; once a week is recommended. For general dust, gently sweeping with a feather duster or a soft-bristled broom is sufficient. However, if the car encounters heavy rain, mud, or severe dust, it should be cleaned promptly.
15
0
Share

What are the detailed tire dimensions of Dahon P8?

The international standard specification for the Big Apple tires on Dahon P8 is 50-406, so the tire circumference is: (406 + 50 x 2) x 3.14159265 = 1590 mm (rounded). Here is some information about the tires: Composition: Tires are usually composed of three parts: the outer tire, inner tube, and flap. The inner layer of the tire body has a rubber layer with good airtightness and requires special rims. The structure of tires worldwide is evolving toward tubeless, radial, flat (with a small ratio of tire section height to width), and lightweight designs. Outer Tire: The outer tire consists of the carcass, buffer layer (or belt layer), tread, sidewall, and bead. The cross-section of the outer tire can be divided into several distinct areas: the crown area, shoulder area (tread slope), flex area (sidewall area), reinforcement area, and bead area.
11
0
Share

Is it okay not to install windshield film?

Not installing film has little impact on vehicle usage and driving. However, if conditions permit, it is recommended to install film. There are many benefits to applying film: after installation on the front windshield, it can reduce the aging time of car interior components caused by harmful sunlight rays and also minimize the damage of harmful rays to the human body. Impact of film installation on vehicle registration: Whether a new car with installed film can be registered mainly depends on whether the installed solar film meets the specified standards. Currently, the vehicle management department primarily refers to the GB7258-2004 "Safety Technical Conditions for Motor Vehicles Operating on Roads" enacted and implemented in 2004. Vehicle management office requirements for film installation: The driver's compartment must ensure the driver's forward and side vision. The visible light transmittance of the front windshield and the glass areas outside the windshield used for the driver's viewing area must not be less than 70%. Mirror-reflective sunshade films are not allowed on any window glass.
16
4
Share

What is the difference between BMW X3 and Brilliance BMW X3?

Brilliance BMW and imported BMW differ in the automotive quality standards of the countries where they are sold, so there will be variations in the entire vehicle. Brilliance BMW: Brilliance BMW Automotive Co., Ltd. is a joint venture established by BMW Group and Brilliance China Automotive Holdings Limited, engaged in the manufacturing, sales, and after-sales service of BMW brand vehicles. In May 2003, Brilliance BMW Automotive Co., Ltd. was officially registered, with its headquarters and production plant located in Shenyang, the capital city of Liaoning Province. BMW: BMW, short for Bayerische Motoren Werke AG (BMW), refers to automobiles produced by the BMW Group. The main series models include the 1, 2, 3, 4, 5, 6, 7, and 8 series. BMW is renowned worldwide for producing luxury cars, motorcycles, and high-performance engines.
14
0
Share

Which department should I register for a physical examination certificate when renewing my driver's license?

No need to make an appointment with any department. The physical examination for the driver's license is available at the registration office of the vehicle management office. The examination items are simple and can be completed quickly. Procedures for renewing the driver's license: Bring your ID card, original driver's license, and one copy to the local traffic department to apply for renewal. Process for renewing the driver's license: Fill out the motor vehicle driver's license application form, take an on-site photo, undergo a physical examination to obtain a motor vehicle driver's physical condition certificate, return to the original processing window for final signing, and the staff will require you to sign the motor vehicle driver's license application form to confirm. The renewal process is then completed. Renewal period: Generally, the new license is valid for 6 years. If there is no full-point record within the first 6 years of validity, the next renewal period will be 10 years.
2
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.