···
Log in / Register

How many hours does it take to fully charge a 72V battery with 6 cells?

4 Answers
Leonardo
07/24/25 10:53am

For the first charge, it is recommended to charge for 8 hours. Subsequently, the charging time should be adjusted based on the remaining battery level and charging frequency. If charging daily, 6-8 hours of charging is sufficient. If charging only after the battery is completely depleted, it is recommended to charge for 8-10 hours. Below is some relevant information about battery voltage: 1. Method to determine if the battery is fully charged: The charging current will decrease. Additionally, the generator internally has a voltage regulation module that controls the output voltage, with the precise ideal voltage being 14.2V, with an error margin of ±0.2V. The voltage is generally also 14V, but it may vary with engine speed. However, due to the generator regulator, the maximum output voltage is 14V. 2. Battery maintenance methods: When the battery is not in use, it should be charged once a month to extend its lifespan. To prevent damage to the battery, regular inspections are necessary. Try to avoid instantaneous high-current discharge.

Was this review help?
1
3
Share
DelLondyn
08/11/25 2:31am

As a regular at an electric vehicle repair shop, I'd like to share some insights about charging a 72V system with six batteries. The charging duration mainly depends on two key factors: the total battery capacity (measured in ampere-hours, Ah) and the charger's output current (measured in amperes, A). Take a common example: assuming each battery has a 20Ah capacity, the total would be around 120Ah. Using a standard 5A charger, the time would be capacity divided by current—120÷5=24 hours, but that seems too long, right? In reality, EV battery packs are usually connected in series, so the total capacity remains at the single-battery level of 20Ah. With a 5A charger, it takes about 4 hours. But if you use a faster 10A charger, it might drop to around 2 hours. Note that temperature and battery age also affect efficiency—charging slows in winter, and older batteries take longer. A word of caution: avoid using excessively high-current chargers for speed, as this can cause overheating or shorten battery life. Generally, 5-7 hours is reasonable, but check your manual for specifics. Also, charge in a suitable location—avoid damp or high-temperature environments to reduce fire risks. Safe charging habits can extend battery life by a year or two.

Was this review help?
4
3
Share
Expand All
Maximus
09/25/25 4:02am

As a regular electric vehicle owner, I usually charge my 72V battery pack consisting of 6 batteries overnight, which takes about 6-8 hours. This is mainly because the battery capacity typically ranges between 20Ah and 30Ah. With a 5A charger output, a simple calculation would be capacity divided by current, resulting in 4 to 6 hours. However, in my actual experience, the 20Ah battery in my vehicle shows a green light (indicating full charge) after just over 4 hours with the original 5A charger. If you have a larger battery or a more powerful charger, say 10A, the charging time might be shorter, but charging too fast is not battery-friendly and can lead to premature failure. I recommend choosing a stable output charger and not skimping on quality by buying off-brand products to avoid voltage instability. During charging, ensure proper ventilation—preferably in a garage or a semi-shaded outdoor area. It's common sense to monitor the indicator lights: stop charging when it's red and continue when it's green. Regular maintenance like this can help improve driving range. In short, there's no need to rush; you can simply charge it overnight while you sleep peacefully.

Was this review help?
1
3
Share
Expand All
VanDylan
11/08/25 6:09am

I've been playing with electric vehicles for over a decade and am thoroughly familiar with charging 72V battery packs. Fully charging six batteries usually takes 5-7 hours, depending on the battery condition. For standard capacities like 20Ah, a 5A charger takes about 4 hours; but if the batteries are aging or the temperature is low (like below freezing in winter), the time extends to over 6 hours. Don't use too strong a charger—5A is more balanced to avoid internal damage to the batteries. The key is matching—don't randomly use a charger with the wrong voltage, or you might ruin the batteries. Safety tip: Place the charger in a ventilated area, away from flammable materials—I've seen accidents happen. Estimating is simple: Divide the capacity by the current to get the hours. Regularly replacing old batteries can save time.

Was this review help?
1
5
Share
Expand All
More Forum Discussions

What is the function of the activated charcoal canister in a car?

The function of the activated charcoal canister in a car is to absorb gasoline vapors that escape from the fuel tank and carburetor when the engine is turned off. When the engine starts, the absorbed gasoline is then blown out and burned. Additional relevant information is as follows: 1. The gasoline vehicle fuel vapor adsorption and desorption device, commonly known as the 'carbon canister,' is an apparatus designed to reduce the emission of gasoline vapors from the car's fuel tank and carburetor. 2. Since gasoline is a volatile liquid, the fuel tank is often filled with gasoline vapors at normal temperatures. The fuel evaporation emission control system's role is to direct these vapors into the combustion process and prevent them from evaporating into the atmosphere. 3. The automobile engine's activated carbon canister has three outlets: the top two outlets connect to the fuel tank and the activated carbon canister solenoid valve, respectively, while the bottom outlet vents to the atmosphere.
6
0
Share

When will the new BMW 3 Series be launched?

2021 BMW 3 Series will be launched in September. Here are the specific details about the new BMW 3 Series: 1. The length, width, and height of the BMW 3 Series are 4719mm, 1824mm, and 1459mm respectively, with a wheelbase of 2851mm. 2. The front face of the BMW 3 Series still features the kidney-shaped grille, and the headlights use full LED light sources, equipped with laser high beams and adaptive turning functions. 3. In terms of power, the 2021 BMW 3 Series 30i/Li models are equipped with a high-power 2.0T engine, with a maximum power of 190kW (258 horsepower) and a peak torque of 400Nm. The transmission is matched with an 8-speed automatic manual transmission.
19
2
Share

Is It Illegal to Convert a Manual Transmission to an Automatic One?

From a legal perspective, converting a manual transmission to an automatic one is not illegal, but modifications should be approached with caution as they may affect annual vehicle inspections. A manual transmission can be converted to a pseudo-automatic transmission: By installing an electronic control system that assists the driver in operating the clutch, but gear shifting still requires manual operation. When shifting gears is needed, the system controls a motor to automatically depress the clutch, and releases it once the gear is engaged, preventing the engine from stalling. The system also provides prompts when gear shifting is required. Disadvantages of modification: After modification, the vehicle may fail the annual inspection. Unauthorized vehicle modifications can also impact insurance claims, as accidents caused by modified parts will not be covered.
4
5
Share

What are the pros and cons of the ATSL transmission?

Here are the pros and cons of the ATSL transmission: 1. Pros: The 2.0 engine is equipped with an eight-speed transmission, which provides continuous power whether at the moment of starting or during acceleration in later driving. 2. Cons: The biggest drawback is the high fuel consumption, heavy steering wheel, low-speed jerking, and slow transmission response. Additional information: The Cadillac ATS-L is a mid-size sedan under SAIC General Motors. The exterior adopts the concept of diamond cutting, which is quite stylish. The 2.0T turbocharged engine has a maximum power of 279 horsepower and a maximum torque of 400 Nm, paired with an 8AT automatic transmission. The interior is sufficiently refined. The chassis features a front-engine rear-wheel-drive structure with independent suspension.
7
0
Share

How to align the timing belt for Haval H6 2.0?

Here are the steps to align the timing belt for Haval H6 2.0: 1. Remove the screw that fixes the tensioner. 2. After removing the screw that fixes the tensioner, the tensioner can be taken off. 3. Rotate the crankshaft so that the rectangle on the crankshaft aligns with the triangle on the cylinder block. 4. Rotate the balance shaft so that the notch on the balance shaft aligns with the triangle on the cylinder block. 5. Rotate the camshaft so that the dot on the camshaft aligns with the triangle on the cylinder block. The operation is now complete. Additional information: Among the engine timing gears, only the camshaft gear has a mark, while the other gears do not have any markings. First, rotate the engine until cylinders 1 and 6 reach the top dead center. Then, assemble all the gears except the camshaft gear, and align the mark on the camshaft gear with the mark on the engine block. After that, rotate the engine to about 22 degrees before the top dead center, adjust the fuel injection pump to the state where the first cylinder just starts to discharge fuel, and tighten the screws.
9
3
Share

Can a car with stickers pass the annual inspection?

Cars with small-area stickers that are not in the form of advertisements and do not exceed 30% of the vehicle's surface area can pass the annual inspection. However, it should be noted that if the area of the stickers exceeds 30% of the vehicle's body, it will be treated as an unauthorized modification of the vehicle's appearance. If the sticker design involves special markings such as police, fire, or ambulance symbols, it will not pass the annual inspection. Additional considerations for car stickers are as follows: 1. The area of car stickers must not exceed 30%; otherwise, you need to register with the vehicle management office and obtain a new vehicle license, or it will be considered an illegal modification. 2. The stickers applied should not affect driving safety; otherwise, the car will not pass the annual inspection. 3. Special colors such as fire engine red, engineering rescue yellow, and the white and blue color scheme for national administrative law enforcement are reserved for special vehicles and cannot be used on ordinary family cars.
18
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.