···
Log in / Register

How many hours can be logged in theoretical training per day?

4 Answers
VonDallas
09/09/25 2:57am
Theoretical study is limited to a maximum of 4 hours per day; if the study time exceeds 4 hours, it will be counted as 4 hours. For students enrolled after midnight on July 24, 2014, the system will pop up a verification code every 15 minutes and pause the timing. The timing will resume only after the student enters the correct code. The distribution of driving test hours is as follows: Introduction to Subject 1: Theoretical hours: 12h. Introduction to Subject 2: Theoretical hours: 2h, practical hours: 32h, total: 34h. Introduction to Subject 3: Theoretical hours: 12h, practical hours: 24h, total: 36h. Principle of the hour system: When a driving student registers at the driving school, their fingerprint is recorded on the timing card. Each training vehicle is equipped with a device that matches the student's timing card. When the student trains in the vehicle, inserting or removing the timing card from the device records the training time.
Was this review help?
5
0
Share
OAriel
09/20/25 7:49am
Our driving school has a maximum daily limit of 4 hours for students to practice on the system, as mandated by the traffic authorities. However, based on practical experience, I recommend dividing the study time into 90-minute sessions in the morning and afternoon for optimal results. The system enforces a 10-minute break every 45 minutes. The key is consistent daily practice—studying continuously for over 2 hours significantly increases error rates, so it's better to spend time organizing a mistake notebook. Allocating an additional 30 minutes before bedtime to review key chapters is more efficient. With this schedule, students can typically complete all required study hours within 20 days.
Was this review help?
11
3
Share
Expand All
Declan
11/03/25 8:12am
Veteran students who passed Subject 1 last year, let's share some experience. The system limits daily practice to 240 minutes - I once tried 3 hours of continuous question practice and ended up dizzy. Later I found fragmented learning more effective: 40 minutes during commute, 40 minutes during lunch break, plus 1 hour focused study at night. Using the Driving Test app, I'd stop to check answers after every 20 questions, screenshotting mistakes to my phone. Focused on challenging sections like penalty questions and sign identification. On weekends when completing all study hours, I'd take mock exams. Three weeks of consistent practice secured my passing score.
Was this review help?
20
2
Share
Expand All
LaJuliana
12/17/25 8:12am
The Ministry of Transport Order No. 124 clearly stipulates that online training shall not exceed 4 hours per day. Practical tests show that trainees' attention span lasts about 90 minutes, so it is recommended to take a 20-minute break after every 1.5 hours of study. The system will automatically count valid training hours, and invalid durations (such as leaving videos running unattended) will be rejected. Reasonable planning suggestions: 2 hours/day for regulations + 1 hour/day for practical theory + 1 hour/day for pre-exam practice questions.
Was this review help?
8
2
Share
Expand All
More Forum Discussions

What is the Automotive Maintenance Schedule?

Automotive maintenance schedule includes: Semi-synthetic engine oil change every 5,000 km, full synthetic every 10,000 km; Full synthetic automatic transmission fluid change every 20,000 km or annually; Synthetic gear oil change every 20,000 km or annually; Synthetic brake fluid change every 20,000 km or annually; Oil filter replacement with every oil change; Standard coolant change every 20,000 km or annually; Power steering fluid circulation replacement every 10,000 km; Standard refrigerant oil top-up annually; Fuel filter replacement every 10,000 km.
15
1
Share

Why does an engine need engine oil?

Introduction to the reasons why an engine needs engine oil: Since the components of an engine are made of metal, without lubrication, metal-to-metal friction can easily cause damage to the parts, and this damage is irreversible and cannot be restored. Therefore, it is essential to rely on engine oil to form a protective oil film on the components, which lubricates and protects the parts, reduces friction between the moving components of the engine, ensures smooth operation of the engine, and improves mechanical efficiency. Engine oil has six main functions: lubrication and friction reduction, cleaning and dispersion, cooling, sealing and leakage prevention, corrosion and rust prevention, and shock absorption. Below are the detailed explanations: 1. Lubrication and friction reduction: Forms an oil film between two sliding surfaces to prevent friction and ensure smooth operation. 2. Cleaning and dispersion: High-quality engine oil flows to wash away dirt from component surfaces, absorbs tiny metal particles, and then carries them to the oil pan via the piston rings. 3. Cooling: The engine generates high temperatures during operation. When oil reaches these areas, it absorbs heat and carries it away, aiding in component cooling. 4. Sealing and leakage prevention: Forms a sealing ring between the piston rings and piston via the oil film, preventing combustion gases from entering the crankcase. 5. Corrosion and rust prevention: High-quality oil adheres to component surfaces, protecting them from air, acidic substances, and harmful gases, thereby preventing corrosion from moisture and air and safeguarding the engine. 6. Shock absorption: When cylinder pressure increases suddenly, the load on the piston, piston rings, connecting rod, and crankshaft bearings becomes substantial. The lubrication provided by the oil helps absorb and buffer these impact loads.
6
3
Share

How to Remove the Turbocharger on a Passat?

Method for removing the turbocharger on a Passat: 1. To remove the turbocharger on a Passat, start by dismantling the intake system on the right side of the engine. This includes the air filter housing, exhaust gas recirculation pipe, various vacuum pipe connections, etc. Additionally, lift the vehicle and use tools such as extension bars and universal joints to remove components from underneath the car. 2. At the same time, another person should work underneath the car to disconnect the middle section of the exhaust pipe, loosen the brackets and screws connecting the catalytic converter housing to the vehicle body, etc. Below is some related information about turbochargers: 1. The working principle of a turbocharger is not actually complicated. Simply put, it operates by using the exhaust gases emitted by the engine to drive the turbine. 2. Then, the turbine drives the impeller connected to the same shaft, continuously forcing fresh air into the engine cylinders. The more air that enters the cylinders per unit of time, the higher the engine's efficiency.
6
1
Share

How to Adjust the Clock in the 8th Generation Accord?

Method to adjust the clock in the 8th Generation Accord: 1. Press and hold the SOUND button until you hear a beep, and the time on the LCD display will start flashing. 2. Press the 4 button to adjust the hour, the 5 button to adjust the minutes, and the 6 button to set the minutes to 00. 3. After adjusting to the correct time, press the SOUND button again to stop the flashing, indicating the time has been successfully set. Below is some related information about the 8th Generation Accord: 1. The development and design concept of the 8th Generation Accord is Advanced-Powerful, signifying the perfect fusion of forward-looking technology and dynamic power. 2. The 8th Generation Accord comprehensively surpasses and breaks through its predecessors, claiming to be the strongest Accord in history. 3. The 8th Generation Accord follows the "Powerful and Dynamic" design philosophy, reflecting a design direction that is grand, high-end, advanced, and prestigious.
19
5
Share

Where is the oil dipstick on a BMW 5 Series?

The BMW 5 Series does not have an oil dipstick. Currently produced gasoline-powered models are equipped with an engine oil level sensor in the oil pan, and the oil level is displayed on the central display via this sensor. Here's how to check the oil level: 1. Start the car and enter the system. 2. Go to Vehicle Information, then Vehicle Status, and finally Oil Level. 3. Perform the detection to view the remaining oil quantity. Additional information: 1. If the oil warning light comes on, park the car in a legal location, turn off the engine, wait for about 10 minutes, and then check the oil level. It's recommended to clean the oil dipstick before rechecking the oil level. 2. It's important to note that the engine must be turned off when checking the oil level to avoid accidents.
15
3
Share

How to Replace the Battery in a Jaguar F-PACE Key?

Jaguar F-PACE key battery replacement steps: Turn the remote key to the backside, there is a gap between the key ring and the side of the key. Use a flathead screwdriver to insert into the gap and gradually widen it by applying upward force. Move the back cover in the closing direction by hand to remove it and reveal the internal battery. Use tweezers to take out the battery, then insert the new battery into the car remote key in the reverse order of disassembly. The Jaguar F-PACE adopts Jaguar's intelligent all-aluminum architecture and advanced suspension system, along with a series of cutting-edge driving technologies such as the intelligent all-wheel drive system and all-terrain adaptive control system. This makes the F-PACE a highly efficient and practical five-seat sports utility vehicle with a peak driving experience.
20
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.