How Many Hours Are Required for C1 License Training?

1 Answers
GarrettMarie
07/29/25 2:29pm
C1 license training requires a total of 62 hours, which includes 12 hours for Subject 1, 16 hours for Subject 2, 24 hours for Subject 3, and 10 hours for Subject 4. According to the "Regulations on the Application and Use of Motor Vehicle Driving Licenses," each training hour is defined as 60 minutes, with a minimum of 45 minutes of actual learning required to count as a valid hour. Additionally, trainees are allowed to log a maximum of 4 hours per day; any hours exceeding this limit will not be counted. To check your training hours, you can use the learning software or platform required by your driving school. Here are the specific steps: 1. Visit the homepage of the "Traffic Safety Comprehensive Service Management Platform." 2. Select your region. 3. Navigate to the "Personal Login" page. 4. Enter your username (usually your ID number) and password (if forgotten, you can reset it via mobile verification). 5. After logging in, go to "My Homepage," where you will find the "Student Information" section. 6. Click on "Training Information" to view your training subjects and hours.
Was this review help?
10
1
Share
More Forum Discussions

Where is the start button located in an Audi car?

Audi car start button is located on the far left of the gear lever, featuring a circular start/stop button labeled 'star'. The vehicle can also be started by inserting the key near the steering wheel - simply insert the key and press it to ignite. For automatic transmission vehicles, it's essential to depress the brake pedal before ignition; otherwise, the engine won't start. The ignition process works by the crankshaft driving the distributor shaft rotation, where the cam on the distributor shaft rotates to make the ignition coil primary contacts connect and disconnect, generating high voltage. The spark plug then emits an electric spark to ignite the gas mixture in the combustion chamber, bringing the engine into operation. Audi perfectly combines sports car body design, efficient power and agile handling with SUV off-road safety (as seen in Audi Q5 performance) and the outstanding comfort/flexible interior space of station wagons, inheriting many superior characteristics from its third-generation flagship SUV Audi Q7. Its body dimensions measure 4629mm in length, 1898mm in width, and 1655mm in height.
7
2
Share

What are the steps to replace the air conditioning filter in an Audi A3?

Audi A3 air conditioning filter replacement steps are: 1. Open the glove compartment in front of the passenger seat, press the plastic buckle inside, then remove the baffle; 2. After removing the plastic baffle, you can see the air conditioning filter inside; 3. Replace with a new air conditioning filter, then reinstall the plastic baffle, and the entire process of replacing the Audi A3 air conditioning filter is completed. The Audi A3 is a compact sedan produced by FAW-Volkswagen Audi, available in both sedan and hatchback versions. In terms of power, the Audi A3 offers a choice between a 1.4-liter turbocharged engine and a 2.0-liter turbocharged engine, with the 1.4-liter version producing a maximum horsepower of 150 and the 2.0-liter version producing a maximum horsepower of 190.
8
2
Share

Where is the tire pressure reset switch for the 2018 Magotan?

The tire pressure reset switch for the 2018 Magotan is located on the right side of the gear lever, marked with an icon resembling a stove containing an exclamation mark. After inflating or replacing a tire, you can press and hold this tire pressure reset button to calibrate the tire pressure monitoring system. The normal range for car tire pressure is between 2.3 and 2.5 MPa. Both excessively high and low tire pressure can affect the vehicle's performance. If the tire pressure is too low, it increases friction between the tire and the ground, accelerating tire wear and, to some extent, increasing fuel consumption. If the tire pressure is too high, it raises the risk of a tire blowout and reduces stability during high-speed driving. The dimensions of the 2018 Magotan are 4933mm in length, 1836mm in width, and 1469mm in height, with a wheelbase of 2871mm.
10
3
Share

Where is the cabin air filter located in the 2019 Sagitar?

The cabin air filter in the 2019 Sagitar is located inside the glove compartment on the passenger side. When replacing the cabin air filter, it is necessary to move the seat backward first, as the space in this area is relatively small, making the installation and removal process somewhat challenging. The recommended replacement interval for the cabin air filter is once a year, but this may vary depending on the specific driving conditions of the vehicle. If the car frequently operates in areas with poor road conditions or low air quality, the cabin air filter may need to be replaced earlier. The cabin air filter used in vehicles is primarily designed to filter out impurities from the external air. During the operation of the air conditioning system, it prevents external dust from entering the cabin, thereby protecting the health of the occupants to a certain extent. The 2019 Sagitar has body dimensions of 4655mm in length, 1780mm in width, and 1453mm in height, with a wheelbase of 2651mm.
6
0
Share

How much horsepower does the eighth-generation Accord 2.4 have?

The eighth-generation Accord 2.4 has 179 horsepower. The 2.4-liter naturally aspirated engine has a maximum power of 132 kW and a maximum torque of 225 Nm. The engine reaches its maximum power at 6,500 rpm and its maximum torque at 4,500 rpm. The Accord is a mid-size car produced by Honda. The eighth-generation Accord measures 4,960 mm in length, 1,860 mm in width, 1,4480 mm in height, and has a wheelbase of 2,800 mm. The car is equipped with three engines: a 2.0-liter naturally aspirated engine, a 2.4-liter naturally aspirated engine, and a 3.5-liter naturally aspirated V6 engine. The 2.0-liter naturally aspirated engine has a maximum power of 115 kW and a maximum torque of 189 Nm, reaching its maximum power at 6,300 rpm and maximum torque at 4,300 rpm. This engine features i-VTEC technology and multi-point fuel injection, with an aluminum alloy cylinder head and block, paired with a 5-speed automatic transmission.
7
4
Share

What engine does the 2019 new Sagitar have?

2019 new Sagitar is equipped with two engines: 1.4T and 2.0T. The 2.0T version is divided into high-power and low-power models. The 1.4T engine has a maximum output power of 110 kW, a maximum torque of 250 Nm, and a top speed of 218 km/h. The low-power 2.0T engine has a maximum output power of 137 kW, a maximum torque of 320 Nm, a top speed of 230 km/h, and a 0-100 km/h acceleration time of 7.5 seconds. The high-power 2.0T engine has a maximum output power of 162 kW, a maximum torque of 350 Nm, and a top speed of 230 km/h. The 2019 Sagitar has a body size of 4655mm in length, 1780mm in width, 1453mm in height, and a wheelbase of 2651mm.
20
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.