···
Log in / Register

How many horsepower is the engine's maximum power of 83kw?

4 Answers
LeSawyer
07/30/25 1:09am

The engine's maximum power of 83kw is equivalent to 112.88 horsepower. Conversion formula: 1kW=1.36 horsepower, 1 horsepower=0.735KW, so 83×1.36=112.88 horsepower. Maximum horsepower: Also known as maximum power, the maximum power RPM literally means the rotational speed at which the engine operates at maximum power. The crankshaft speed corresponding to the engine's maximum power output is the maximum power RPM. The engine's output is directly related to its rotational speed. Initially, as the rotational speed increases, the engine's power output also increases.

Was this review help?
7
2
Share
LeAugust
08/15/25 6:41am

I've driven for many years and encountered engines with 83 kW of power, which converts to approximately 111 horsepower. This is quite common in compact cars, like the Toyota Corolla or Honda Fit class. Horsepower directly affects acceleration feel—cars around 110 horsepower typically take about 10 seconds for 0-60 mph, which is more than sufficient for city commuting, offering brisk starts and good fuel efficiency. Of course, too much horsepower increases fuel consumption, while too little makes highway driving sluggish. The conversion is simple: one kilowatt equals 1.341 horsepower, so 83 multiplied gives roughly 111. When buying a car, pay attention to the manufacturer's stated specs, but real-world conditions like hill climbs or AC usage can affect performance. In daily driving, this power level strikes a balance between economy and practicality—overtaking isn’t aggressive but is safe enough. Overall, it’s suitable for families or commuters and is relatively cheap to maintain.

Was this review help?
8
3
Share
Expand All
DianaFitz
10/20/25 5:28am

I'm used to converting 83 kW to horsepower, which comes out to about 111 hp. As an average car owner, my small car performs at this level, which is sufficient for daily driving—overtaking in the city is effortless, and cruising at 120 km/h on the highway is stable. Too much horsepower isn’t cost-effective as it increases fuel consumption; too little makes climbing steep hills difficult. The conversion formula is one kilowatt equals 1.341 horsepower, precisely 111.4 when calculated to decimal places, but manufacturers usually round it off. For example, my old Volkswagen Polo has a 111 hp engine, and after years of use, the power response remains reliable. If you're considering buying a car, I recommend also paying attention to torque and fuel consumption. 111 hp is a moderate level—not aggressive but practical. Don’t just focus on the numbers; test driving is most important to ensure it meets your driving needs.

Was this review help?
12
5
Share
Expand All
StLayla
12/03/25 6:01am

An 83 kW engine power corresponds to 111 horsepower. My driving instructor taught me this conversion—just remember that 1 kW is approximately equal to 1.341 hp. Multiply 83, and the result is around 111. This figure is quite common in compact cars, like some entry-level Ford Fiesta models, which hover around 110 hp, offering smooth and easy handling. In practice, don’t worry too much about minor precision deviations, as power tests may have slight variations. Still, 111 hp is more than enough for beginners to drive safely, with reliable acceleration, though not overly fast. When choosing a car, it’s wise to check the manual for confirmation, as higher horsepower may increase fuel consumption. Simply put, this is a basic unit conversion with minimal impact on actual driving.

Was this review help?
7
3
Share
Expand All
More Forum Discussions

How to Remove Tree Sap from a Car Body?

Methods to remove tree sap from a car body: 1. Locate the tree sap stains on the car's paint surface; 2. Pour some liquor onto a cloth, as the alcohol can dissolve the tree sap on the car's paint; 3. Use the liquor-soaked cloth to wipe away the tree sap stains on the car's paint. Car paint maintenance methods include: 1. Avoid washing the car under direct sunlight to prevent the paint from cracking due to sudden temperature changes; 2. Regularly inspect the car's paint surface and address any cracks or scratches promptly to prevent further damage from exposure to wind and sun; 3. Do not use car covers to shield from heat, as they can cause friction between the cover and the paint surface, leading to wear; 4. Avoid repainting the car unnecessarily, as repainted surfaces may not match the original paint's natural gloss; 5. Refrain from using car dusters immediately after rain to prevent scratching the paint surface.
17
1
Share

How to reset the maintenance light on the Roewe i6?

Roewe i6 maintenance reset steps: 1. Turn on the ignition switch to power up the car; 2. During the OIL symbol display on the instrument cluster information display, press and hold the MODE button for more than 5 seconds; 3. After the OIL symbol starts flashing, quickly press the MODE button five or more times in succession; 4. After pressing the MODE button five times, the OIL symbol will flash three times and then turn off; 5. The maintenance light will go out, indicating that the reset is complete. The Roewe i6 is the first internet-connected sedan officially announced by Roewe. In terms of body dimensions, the Roewe i6 measures 4671mm in length, 1835mm in width, 1464mm in height, and has a wheelbase of 2715mm.
20
1
Share

How to Turn on the Low Beam Headlights of a Car?

Turning on the low beam headlights of a car: The vehicle's lighting combination switch comes in lever-style and knob-style, with a dedicated low beam position. For lever-style switches, move the lighting control lever to the low beam position to activate the low beams. For knob-style switches, rotate the knob clockwise to the low beam position to turn on the low beams. Low beams must be turned on in the following situations: 1. When driving in dark areas without streetlights, or during dusk when visibility is low or at dawn when light is just appearing; 2. During heavy fog, snow, or heavy rain, when visibility is obstructed, even during the day; 3. On certain roads where lighting is insufficient despite the presence of illumination. Note: To determine whether to turn on the low beams at dusk, check your rearview mirror. If the vehicle behind you starts to appear blurry in the mirror, it's time to turn on the low beams.
15
5
Share

How to align the timing of the Roewe 350?

The method to align the timing of the Roewe 350: Open the engine cover, there are two round holes on the camshaft that should be vertically upward. On the left side of the three-way catalytic converter, near the transmission position, there is a small hole about the size of a chopstick. Insert a sturdy iron rod into it. Turn the engine until the iron rod inserts into the small hole on the flywheel, then lock the camshaft with the two round holes vertically upward. The Roewe 350 is a compact sedan positioned in the A-segment market, launched by SAIC Motor following the Roewe 750 and Roewe 550. In terms of body dimensions, the Roewe 350 measures 4521mm in length, 1788mm in width, and 1492mm in height.
17
0
Share

What is the ground clearance of the RAV4?

The ground clearance of the RAV4 is 152mm. The vehicle is equipped with a CVT continuously variable transmission to provide power, and its minimum ground clearance height aligns with its positioning as an urban SUV, allowing it to adapt to most urban road conditions. The RAV4 is an SUV model under Toyota, available with either a 2.0-liter or a 2.5-liter engine. The car features a spacious interior, a multifunctional steering wheel, and a large LCD instrument panel, with a stylishly designed central control screen. In terms of dimensions, the RAV4 measures 4.265 meters in length, 1.785 meters in width, and 1.705 meters in height.
19
5
Share

What is the engine model of the Passat?

The Passat 2.0T engine model is EA888, with a maximum power of 162kW and a maximum torque of 350Nm. The 1.4T engine model is EA211, with a maximum power of 137kW and a maximum torque of 320Nm. The Passat engine belongs to FAW-Volkswagen Engine (Dalian) Co., Ltd. and is produced by the Dalian Powertrain Manufacturing Plant. For daily maintenance of the Passat engine, the following methods can be used: Use lubricating oil of the appropriate quality grade. For gasoline engines, SD--SF grade gasoline engine oil should be selected based on the additional equipment of the intake and exhaust systems and usage conditions; for diesel engines, CB--CD grade diesel engine oil should be selected according to mechanical load, with the selection standard not lower than the manufacturer's requirements. Regularly change the oil and filter. The quality of any lubricating oil will change during use. After a certain mileage, performance deteriorates, causing various problems for the engine. To avoid malfunctions, change the oil regularly according to usage conditions and maintain an appropriate oil level. When oil passes through the fine pores of the filter, solid particles and viscous substances in the oil accumulate in the filter. If the filter is blocked and oil cannot pass through the filter element, the filter element may burst or the safety valve may open, allowing oil to bypass through the bypass valve and carry contaminants back to the lubrication area, accelerating engine wear and increasing internal pollution. Regularly clean the crankcase. During engine operation, high-pressure unburned gases, acids, moisture, sulfur, and nitrogen oxides from the combustion chamber enter the crankcase through the gap between the piston rings and cylinder walls, mixing with metal particles from component wear to form sludge. In small amounts, it remains suspended in the oil; in large amounts, it precipitates, clogging filters and oil passages, making engine lubrication difficult and causing wear. Regularly use a radiator cleaner to clean the radiator. Removing rust and scale not only ensures the engine operates properly but also extends the overall lifespan of the radiator and engine.
13
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.