How many horsepower is 129kw for an engine?

3 Answers
OStephen
07/29/25 4:39pm
1kw equals 1.36 horsepower, so an engine with 129kw is 175 horsepower. Definition of power: Power is an important performance parameter of an engine, used to measure how much work the engine can perform per unit of time. The greater the power, the more work the engine can do in a unit of time. Higher power also results in better acceleration performance for the vehicle. Another important performance parameter of a car's engine is torque, which measures the output force per work cycle. Ways to increase power: To increase power, both rotational speed (RPM) and torque need to be improved. Engines with higher RPM and greater torque will have higher power. Most civilian vehicles improve power by increasing torque, while most racing engines achieve higher power by increasing RPM.
Was this review help?
19
3
Share
MiaLynn
08/14/25 6:03am
I think 129 kilowatts converts to approximately 172 to 173 horsepower, using the conversion factor of 1.341. Based on my driving experience, this horsepower range is quite common in regular family cars or small to medium-sized SUVs. For example, many 1.5T turbocharged engines fall within the 120 to 180 horsepower range. 173 horsepower feels quite sufficient—it provides quick acceleration for overtaking in the city and stable performance on highways without feeling strained. However, too much horsepower can lead to higher fuel consumption. I usually focus on smooth acceleration and avoid stomping on the gas pedal, which helps extend engine life. Regular maintenance, such as oil changes and air filter upkeep, is also crucial. Overall, this horsepower value strikes a good balance—practical and economical.
Was this review help?
15
0
Share
Expand All
RowanLee
10/13/25 2:21am
129 kilowatts equals more than 172 horsepower. As a car enthusiast, I've been paying attention to these details for a long time. The power conversion isn't difficult—1 kW is roughly 1.341 horsepower, so a simple calculation gives around 173. This horsepower figure is common among entry-level models on the market, such as the Honda Civic or Ford Focus. I've test-driven many cars, and 173 horsepower delivers a smooth power feel without abrupt acceleration. However, compared to performance cars with over 200 horsepower, it's not as aggressive and is better suited for daily commuting. If you're looking to upgrade, an ECU tune can boost power by about 10%, though fuel consumption will slightly increase. Remember, horsepower directly affects acceleration response and driving enjoyment, but maintaining proper tire pressure to optimize drivetrain efficiency is more practical.
Was this review help?
19
4
Share
Expand All
More Forum Discussions

Where to fill coolant in Volkswagen Polo?

Volkswagen Polo coolant is filled in the reservoir near the right front headlight in the engine compartment. Precautions for adding: Generally, the amount of coolant to be added should be between the MAX (highest water level mark) and MIN (lowest water level mark). It should be added when the Volkswagen Polo is stationary. After the engine is turned off, wait for it to cool down. Adding coolant when the engine is hot may result in inaccurate water level readings. Replacement cycle instructions: Coolant needs to be checked and replaced regularly. Volkswagen Polo should have its coolant replaced approximately every two years or 40,000 kilometers, depending on the actual usage conditions of the vehicle.
15
0
Share

What is the minimum ground clearance of the BMW 320Li?

The minimum ground clearance of the BMW 320Li is 130MM. Concept of minimum ground clearance: Ground clearance refers to the distance between the ground and the rigid objects at the bottom of the vehicle. The ground clearance of a vehicle varies depending on whether it is unloaded or loaded. Ground clearance is categorized into unloaded and loaded conditions. The ground clearance when loaded is also referred to as the minimum ground clearance, which is the shortest distance between the lowest protruding part of the vehicle's chassis and the ground when the vehicle is parked horizontally under the rated full load condition. Characteristics of ground clearance size: Ground clearance is related to the vehicle's load; the heavier the load, the smaller the ground clearance. Vehicles with smaller ground clearance have a lower center of gravity but poorer off-road capability. Vehicles with larger ground clearance have better off-road capability. Higher ground clearance not only improves performance on gravel or mountainous roads but also helps prevent water from entering the exhaust pipe when driving through flooded areas and makes it easier to park on curbs or other parking spaces with height differences.
19
4
Share

What are the reasons why the Nissan Tiida remote control cannot lock?

Here are the specific reasons why the Nissan Tiida remote control cannot lock: Central locking system is activated: When the car door cannot be opened, you can first use the car key to unlock and then lock it, repeating this twice. Locate the central locking button on the left front door trim panel of the driver's compartment and press the unlock button. Lock cable failure: If the car door cannot be opened from inside, the cable may have failed, directly affecting the lock mechanism's ability to open. Door hinge or lock post deformation: When the car door is subjected to a certain amount of external force, it may cause deformation of the door hinge and lock post, which is also one of the reasons why the car door cannot be opened. In this case, the door and door hinge must be disassembled together and replaced with new hinges and lock posts to restore normal door operation.
10
3
Share

Can the ETC license plate number be different from the actual license plate number?

If the license plate number bound to the ETC does not match the actual license plate number, it cannot be used. Different vehicle models have different highway toll fees. According to the "Rules for the Use of Non-Stop Fast Pass Systems," when applying for an ETC, the ETC card and OBU device are already bound to the vehicle, and the vehicle's relevant information has been imported, forming a one-to-one correspondence. If you replace your vehicle with a new license plate, you need to cancel the original ETC and reapply for the new vehicle. If it's a new vehicle with the old license plate, you can simply update the vehicle information at an offline service center. ETC is a non-stop electronic toll collection system. ETC lanes are set up for vehicles equipped with ETC onboard devices and use electronic tolling. The electronic toll collection system is an automated toll system for highways or bridges. ETC billing principles: There will be one or more ETC lanes on the highway. Through dedicated short-range microwave communication between the onboard electronic tag installed on the vehicle's windshield and the microwave antenna in the ETC lane at the toll station, computer networking technology is used to settle accounts with the bank in the background. This achieves the purpose of vehicles not needing to stop at toll stations to pay tolls, all based on the principle of "pass first, deduct later." Benefits of installing ETC: Save time: Eliminates the hassle of waiting in line. Green and eco-friendly: Green and low-carbon, vehicles pass through toll stations without stopping, reducing noise and exhaust emissions and minimizing pollution. Reduce wear and tear: Saves costs, reduces the frequency of vehicle starts and brakes, lowers wear and fuel consumption, and users can also enjoy a 5% discount on toll fees. Improve efficiency: The theoretical efficiency of ETC lanes can be increased by 2-3 times or more, making traditional ETC updates faster, newer, and more high-tech. Compared to license plate payment, ETC technology is more mature and advantageous. More policy support: The State Council clearly stated in the "13th Five-Year Plan for the Development of a Modern Comprehensive Transportation System" that "by 2020, the interoperability of transportation cards in key city clusters will be basically achieved, and the proportion of vehicles equipped with ETC will significantly increase." It also explicitly set the goal in the "13th Five-Year" comprehensive transportation development indicators that "by 2020, the ETC usage rate for road passenger vehicles will reach 50%." More future possibilities: In addition to continuously improving the convenience of ETC installation and usage and the ETC usage rate for passenger vehicles, the future will also promote the use of ETC for trucks and explore the deep integration of the ETC system with smart transportation development directions such as vehicle-to-vehicle communication and vehicle-road coordination, providing comprehensive travel services for car owners. This means more application scenarios will support ETC usage. ETC usage precautions: The ETC transaction sensing area is 8 meters. When encountering a stopped vehicle ahead, to prevent the ETC device of the vehicle ahead from malfunctioning or not having an ETC device at all, maintain a distance of more than 10 meters from the vehicle ahead to avoid automatic sensing and paying for the vehicle ahead. The recognition speed for ETC lane passage is 20 km/h. If the speed is too fast, the vehicle device information cannot be read, and the toll deduction will fail. Unauthorized removal or movement of the OBU device, detachment or loosening of the ETC electronic tag, etc., will cause the electronic tag to fail. It can be sent to the bank where the ETC card was issued or the highway service center for testing. If the loosening or detachment is not caused by human factors, it only needs to be reactivated. When using a debit card bound to ETC, insufficient balance will also cause toll deduction to fail. Follow the guidance of on-site staff to use the manual MTC lane and pass by cash or card. If the vehicle's windshield is too thick, it may cause poor sensing. This is especially important for vehicles that have had windshield replacements after accidents or for those who have modified their front windshields.
7
4
Share

Is the Volvo S90 four-wheel drive?

Volvo S90 has four-wheel drive models. The hybrid version of S90 is four-wheel drive. Engine related technologies: This engine is equipped with direct injection technology and uses aluminum alloy cylinder heads and blocks. The maximum power of the matched electric motor is 65 kilowatts, and the maximum torque is 240 Newton meters. Difference between front four-wheel drive and front-wheel drive: The Volvo S90 uses double-wishbone independent suspension at the front and multi-link independent suspension at the rear. The double-wishbone suspension consists of upper and lower wishbones with a connecting rod, which can reduce body roll and brake dive, improving handling and ride comfort. The multi-link suspension is an improved version of the double-wishbone suspension, enhancing wheel grip.
4
3
Share

What are the dimensions of the Audi S8 in terms of length, width, and height?

The Audi S8 has a length of 5302mm, a width of 1945mm, and a height of 1483mm. Interior features: The vehicle is equipped with premium Valcona leather massage and ventilated seats, a 360-degree visual parking system, a 19-speaker Bang & Olufsen sound system (1400W peak power), and an 8-inch navigation system. Performance specifications: The S8 is powered by a 4.0-liter TFSI twin-turbocharged engine, delivering a maximum horsepower of 520 hp and a peak torque of 650 Nm, significantly improved from the previous generation's 444 hp and 540 Nm. The car accelerates from 0 to 100 km/h in just 4.2 seconds, with a top speed of 250 km/h. It comes with an 8-speed Tiptronic automatic transmission and the Quattro all-wheel-drive system.
19
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.