How many generations of the Reiz are there?

2 Answers
Ann
07/25/25 6:33am
During the 12 years that the Reiz was in service in China, there were only two generations of models. The differences between the two generations can be broadly summarized as follows: 1. Powertrain. First-generation Reiz: Equipped with a 2.5-liter V6 naturally aspirated engine paired with a 6-speed automatic transmission, delivering a maximum power of 145KW, maximum horsepower of 197PS, and maximum torque of 242N·m. It also featured a 3.0-liter V6 naturally aspirated engine with a 6-speed automatic transmission, producing a maximum power of 170KW and maximum horsepower of 231PS. Second-generation Reiz: Equipped with a 2.5-liter V6 naturally aspirated engine paired with a 6-speed automatic transmission, delivering a maximum power of 142KW and maximum horsepower of 193PS. Additionally, the throttle response of the first-generation Reiz was more sensitive than that of the second generation. Even with the 2.5-liter engine, the first-generation model responded very actively with just a light press of the accelerator. 2. The second-generation Reiz had better steering than the first-generation Reiz: The steering feel of the second-generation Reiz was more precise, with slightly heavier power assistance, resulting in a more stable overall feel. In contrast, the steering wheel of the first-generation Reiz was notably lighter.
Was this review help?
20
2
Share
CoraFitz
08/10/25 6:11pm
I used to be a car enthusiast and had a particular interest in the Toyota Reiz. The Reiz had three generations in total. The first generation was launched in 2005 and became popular as a rear-wheel-drive V6 sedan, offering a very stable driving experience. The second generation was released around 2010, featuring minor exterior updates while retaining the core powertrain, and it still sold well. The third generation started production in 2013 and continued until its discontinuation in 2017. This generation underwent significant updates, with a more modern interior, but unfortunately, it was eventually phased out due to the rise of SUVs and market pressures. Overall, these three generations of the Reiz witnessed the evolution of the sedan market. For old fans like me, it remains a symbol of its era, and spare parts for later models are still relatively easy to find.
Was this review help?
12
1
Share
Expand All
More Forum Discussions

How to Solve the Vibration Issue of Buick Excelle?

Check if the spark plugs have excessive carbon buildup and replace them if necessary. Below is relevant information: 1. If you have already cleaned the engine carbon deposits, cleaned the throttle body, replaced the oil pads and spark plugs, but still notice body vibration at idle, it is recommended to visit a 4S shop to check whether the fuel supply pressure and intake pressure sensor are normal. 2. The Buick Excelle is another masterpiece launched by the Buick brand after the new Regal, new LaCrosse, and Enclave, based on the "global platform, European and American technology." It integrates the best dynamic genes that the Buick brand has endowed to mid-size cars, bringing a new five-door coupe driving experience to the mid-size car market. The launch of the Buick Excelle fills the product gap between the new Excelle and the new Regal for the Buick brand, and further strengthens and perfects the product lineup of the Buick brand.
9
5
Share

What engine does the Zotye 5008 have?

Zotye 5008 is equipped with a Mitsubishi 4G15 engine. Here is the relevant information: 1. The Zotye engine comes with a 1.3L naturally aspirated engine and a 1.5L naturally aspirated engine, paired with a 5-speed manual transmission and a CVT continuously variable transmission. 2. The Zotye 5008 is a 5-door, 5-seat compact SUV produced by Zotye Auto, with body dimensions of 3970mm in length, 1570mm in width, and 1730mm in height, a wheelbase of 2420mm, and a fuel tank capacity of 46 liters. The Zotye 5008 features MacPherson independent front suspension and five-link independent rear suspension, with a front-engine, rear-wheel-drive layout.
7
4
Share

What to Do When the Cadillac XT5 Displays 'Transmission Service Required'?

If the XT5 suddenly displays 'Transmission Service Required', it is recommended to directly visit a 4S dealership for diagnostics to check the fault codes. Common transmission issues include: 1. Transmission fluid leakage. Oil seepage from the transmission housing or oil pan could be due to aging seals causing poor sealing or manufacturing defects resulting in porosity in the housing. 2. Clogged transmission inlet filter screen; severe oil circuit leakage; damaged oil pump. During driving, gear shifting may feel jerky or abrupt, which are common symptoms of automatic transmission problems, potentially caused by contaminated transmission fluid leading to valve body sticking. 3. Transmission slippage, lack of acceleration power; water ingress in transmission. While driving, if the engine revs without corresponding speed increase and the vehicle feels sluggish, this is often due to burnt clutch plates. Water entering the transmission from external sources (e.g., radiator cross-contamination or via the transmission vent cap) can cause abnormal transmission operation.
16
5
Share

What do the F and E on the Leiling fuel gauge represent?

The E and F characters on the Leiling fuel gauge represent the remaining gasoline in the fuel tank. More relevant information is as follows: 1. The fuel gauge displays the fuel level through a float in the fuel tank connected to a metal rod. This principle is similar to the toilet tank in a bathroom. The end of the metal rod connected to the float is linked to a variable resistor via a movable contact point. The position of the float on the fuel surface in the tank changes, which in turn alters the position on the variable resistor via the metal rod. This variable resistor is connected to the car's fuel gauge, and the movement of the fuel gauge pointer is controlled by the amount of current passing through the variable resistor. 2. When the fuel is about to run out, the dashboard will issue a low fuel warning, shaped like a vertical soda can, with the warning symbol in red. Generally, after this warning appears, the car can still travel about 5 kilometers before running out of fuel. Different cars have different settings, so it is essential to find the nearest gas station for refueling after the warning appears.
2
4
Share

How to Turn on the Highlander Air Conditioner?

Below are the methods to turn on the Highlander air conditioner: The Highlander air conditioner controls can be divided into front manual air conditioning control and front automatic air conditioning control. Pressing the A/C button turns on the Toyota Highlander air conditioning system, and the indicator light on the button illuminates. Pressing this button again turns off the indicator light and shuts down the compressor. Additional details: 1. Rotate the 1 knob clockwise or counterclockwise to raise or lower the temperature. To adjust the temperature for the driver's seat, front passenger seat, and rear seats separately: Press "SYNC" (the "SYNC" display disappears) and rotate the front passenger side 2 knob. (The "PASSSYNC" display switches to "PASS") Press the "up" or "down" side of "REARSYNC". Each time "SYNC" is pressed, the air conditioning system switches between independent mode and sync mode. 2. Fan speed setting: To adjust the fan speed, press "up" on the speed setting to increase the fan speed, press "down" to decrease the fan speed, or press OFF to turn off the fan. 3. Switching airflow mode: Press the air vent setting to switch the airflow mode. Each time this button is pressed, the air vent in use switches.
4
0
Share

How to Open the Bonnet of the Boyue?

Method to open the bonnet of the Geely Boyue: Pull the bonnet release handle located at the lower left side of the driver's side dashboard inside the car, marked with this symbol, to open it. Here is some relevant information: 1. The bonnet switch of the Geely Boyue is located in the control area on the left side of the steering wheel, where there is an unlock button. Just press it lightly, and the bonnet will slightly pop up with a "click" sound to unlock. However, pressing the bonnet unlock button inside the car does not fully open it. There is another latch located under the bonnet, in the middle of the front cover. Only after releasing this latch can the bonnet be fully opened. 2. Closing the bonnet of the Boyue is also very simple. Pull down the bonnet, place both hands on the front edge of the bonnet, corresponding to the positions of the headlights on both sides, and press down gently. There is no need to use excessive force. When you hear a "click" sound, it means the bonnet is securely closed. Avoid pressing too hard on the central part of the bonnet, and it is best not to slam it shut, as the bonnet is made of aluminum alloy and excessive force may cause dents.
5
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.