How many gears does the Geely Vision automatic transmission have?

3 Answers
McAlexis
07/29/25 11:12am
Geely Vision automatic transmission has four gears. Introduction to automatic transmission: As the name suggests, automatic transmission does not require the driver to shift gears manually. The vehicle will automatically select the appropriate gear based on driving speed and traffic conditions. Automatic transmission gear classification: Generally, automatic transmission cars have six gear positions, from top to bottom: P, R, N, D, S, L. Driving an automatic transmission car only requires using the parking gear P, reverse gear R, neutral gear N, and drive gear D, which can fully meet the needs of general driving. However, if encountering some special driving environments, other functional gears may be needed. Therefore, if the correct control method is chosen, automatic transmission cars can perform better than manual transmission cars.
Was this review help?
10
0
Share
MacAdriana
08/13/25 5:52pm
I remember driving the Geely Vision with automatic transmission was quite straightforward in terms of gear operation. It used a 4AT gearbox, which is a traditional automatic transmission mode, featuring four basic gears: P, R, N, and D. For daily driving, shifting into D gear allowed the system to automatically switch between the four forward gears, which was perfectly adequate for city roads. When climbing or descending long slopes, you could switch to manual mode to limit the gear to a lower position, with the dashboard displaying 2nd gear or L gear to prevent slipping. This system had low maintenance costs—I only changed the transmission oil once in three years, proving it to be exceptionally durable. On the highway, the acceleration felt smooth, but with aggressive driving, the four-gear design resulted in slightly higher fuel consumption, making it more suitable for daily commuting.
Was this review help?
3
5
Share
Expand All
VonOscar
08/13/25 5:54pm
Research shows that the Geely Yuanjing automatic transmission usually comes with a four-speed automatic gearbox (4AT), meaning there are four fixed gear ratios for forward driving. The gear lever clearly marks the basic positions: P for Park, R for Reverse, N for Neutral, and D for Drive. Some models offer a manual mode controlled via buttons or paddle shifters. Its simple structure makes maintenance easy, unlike the complex multi-gear setups in premium models, but it's more beginner-friendly. Transmission fluid should be changed regularly, with inspections recommended every 30,000 kilometers. The four-speed design is sufficient for urban-rural routes, offering quick response and straightforward overtaking, though it lacks the smoothness of a six-speed transmission.
Was this review help?
3
0
Share
Expand All
More Forum Discussions

Does a car radiator need water? How often should it be refilled?

Cars do not require water; they need to use specialized coolant. Generally, 4S shops recommend that car owners refill it every 20,000 kilometers. However, this is not a fixed value, as the specific refill time should be determined based on the driving environment and usage conditions of different car owners. The function of the car radiator and the position for adding water are as follows: Function of the car radiator: The car radiator absorbs heat from the cylinder block to prevent engine overheating. Since water has a relatively high specific heat capacity, its temperature does not rise significantly after absorbing heat from the cylinder block. Therefore, the engine's heat is dissipated through the liquid circuit of the coolant, using water as the heat transfer medium. The heat is then dissipated by convection through large-area cooling fins to maintain the engine's optimal operating temperature. Position for adding water to the car radiator: There are two markings on the inner wall of the coolant reservoir: one is MAX, and the other is MIN, representing the highest and lowest levels, respectively. Simply keep the water level between these two marks.
4
2
Share

What Causes the Car to Not Accelerate When Pressing the Gas Pedal?

When a car fails to accelerate properly when pressing the gas pedal, it may be due to poor-quality gasoline or a malfunctioning throttle pedal. The specific reasons are as follows: Use of Poor-Quality Gasoline: The fuel system of the engine is crucial. If poor-quality gasoline is used, it can lead to issues such as fuel pump burnout, catalytic converter failure, or piston problems, directly affecting the engine's power output. This often results in difficulty accelerating and a lack of speed increase. Malfunctioning Throttle Pedal: This issue can be attributed to a faulty throttle pedal. When the gas pedal is pressed, the throttle cable moves the throttle valve, which is essentially the throttle. The throttle valve is equipped with a position sensor, and the control unit uses the signal from this sensor to determine the throttle opening. The throttle position sensor signal is part of the intake system. For the engine to function properly, it requires sufficient air. If there is a leak or blockage in the intake system, pressing the gas pedal will result in reduced power and an inability to increase the engine's RPM.
4
0
Share

What Does an In-Car Airbag Look Like?

An in-car airbag resembles a balloon-like bag. The introduction and function of the airbag are as follows: Introduction to Airbags: Car airbags are designed to deploy within a very short time after a collision occurs. The ECU sends an ignition command, the gas generator detonates to release gas, and the airbag inflates, breaking through the cover to form a cushion. This prevents the forward-moving occupants from hitting the steering wheel, dashboard, or other car components. Function of Airbags: When deployed, the airbag forms a cushion (similar to an inflated balloon), which absorbs a significant portion of the forward momentum and energy generated by the collision, thereby providing protection.
20
3
Share

What is the 275-18 tire interchangeable with?

275-18 tires can be interchanged with 3.00-18 tires. The relevant details are as follows: Interchangeable conditions: For some street bikes or sports bikes, the front and rear tire tread patterns are the same. In such cases, as long as the width and model are suitable, they can be interchanged. Precautions: It is best not to swap front and rear tires. Ordinary front tires have directional tread patterns, providing better steering and straight-line performance, while rear tires have tread patterns with better grip. If rear tires are installed on the front, it may affect straight-line stability, increase resistance, and potentially impact fuel consumption and power. Similarly, front tires installed on the rear may slightly reduce grip, affecting power performance.
20
3
Share

After how many kilometers should tires be replaced?

Tires generally have a service life of about 3 years or 80,000 kilometers. The judgment methods are as follows: Tread depth assessment: The condition of tire treads directly affects the tire's grip and vehicle stability. If the tread is too thin or worn out, it can lead to longer braking distances and increased risk of skidding in rainy conditions. Therefore, it's essential to regularly check the tread depth. Typically, each tire has tread wear indicators. If the tire wears down to these indicators, it needs to be replaced, meaning the tread depth is less than 1.6mm. Tire rubber aging assessment: For family cars, the daily mileage isn't usually very high, so reaching the tread wear limit isn't common. However, tire aging is a frequent issue. The most common sign of tire rubber aging is the appearance of cracks and fine lines on the tire surface, a phenomenon known as tire cracking. Since tire rubber requires a certain level of hardness, a manufacturing process called vulcanization is used. Vulcanized rubber increases hardness but tends to age over time. Therefore, the service life of tires is around 3 years.
12
2
Share

What Lights Should You Turn On in Foggy Weather?

In foggy weather, vehicles should turn on fog lights and hazard warning lights. The relevant details are as follows: Turning on fog lights: Fog lights have stronger penetration, so they must be turned on in foggy conditions. Most new car models now have hazard lights and turn signals that do not interfere with each other. Moreover, turn signals have higher priority, meaning that when hazard lights are on and a turn signal is activated, the hazard lights automatically turn off, and the corresponding turn signal lights up. After the turn signal is turned off, the hazard lights automatically resume. Turning on hazard lights when driving straight: Hazard lights can be turned on when driving straight or on highways to make it easier for vehicles behind to spot you. However, they should be turned off when making turns. When hazard lights are on and you activate a turn signal, the hazard lights automatically cancel and switch to the turn signal. Once the turn signal is turned off, the hazard lights automatically resume.
5
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.