How many fuel tanks does the Buick Excelle have?

1 Answers
JakeMarie
07/29/25 3:28am
The average fuel consumption of the Buick Excelle is 8.1L/100km. Here is an introduction to the Buick Excelle: 1. Introduction: 2018 Buick New Excelle: As the core force of the Buick family's deep cultivation in the home market layout, the 2018 New Excelle adopts an "advantage optimization" upgrade strategy, with comprehensive upgrades in the widely recognized aspects of appearance, fuel consumption, connectivity, safety, and configuration, continuing the legend of the king in the mid-size car market. 2. Exterior: The new family-style winged chrome grille makes the front face look more sharp and tough. The combination of black piano vertical grille and high-gloss chrome winged grille naturally focuses the visual center of the front on the emblem. At the same time, the winged grille extends horizontally to the headlights on both sides, enhancing the horizontal visual effect and sense of wholeness of the front. 3. Power: The Excelle introduces the GM's new generation 1.3T/1.0T Ecotec dual-injection turbocharged engine for the first time.
Was this review help?
13
4
Share
More Forum Discussions

How to Best Control the Clutch in Subject Two?

Use the heel of your left foot as a pivot point, place the ball of your foot on the clutch pedal, and press or lift using your ankle and knee. Here is some related information about the clutch: Definition of the clutch: The clutch is installed between the engine and the transmission and is the assembly component in the car's drivetrain that directly connects to the engine. Typically, the clutch is mounted together with the engine crankshaft's flywheel group, serving as the component that cuts off and transmits power between the engine and the car's drivetrain. Composition of the clutch: The clutch consists of friction plates, spring plates, pressure plates, and the power output shaft. Located between the engine and the gearbox, the clutch transmits the torque stored on the engine's flywheel to the gearbox, ensuring that the appropriate amount of driving force and torque is delivered to the driving wheels under different driving conditions, which falls under the category of the powertrain. During semi-engagement, the clutch allows for a speed difference between the power input end and the power output end, meaning it transmits the appropriate amount of power through this speed difference.
3
1
Share

What are the differences between the Vito and V260?

The Vito lacks LED taillights, rear radar (available on high-end Vito models), rear chrome trim strips compared to the V260, and there are subtle differences in the rear bumper styling features. Below are relevant details comparing the Vito and V260: Front section: There are significant differences in the front bumper and grille. The Vito's grille features black plastic components, appearing dull and monotonous, whereas the V260 adopts a solid large emblem with more prominent chrome-plated air intake grilles, enhancing a sense of layering and highlighting quality. Apart from the lights, the rear bumper also differs, with variations in the contour lines. Interior: This is the most crucial aspect for an MPV business vehicle. Starting with the dashboard, the V260's dashboard incorporates wood-grain decorative panels paired with metallic-feel buttons, exuding a strong sense of layering, texture, and luxury. The premium V260 edition also includes a small refrigerator, with retractable small tables equipped in the rear seats. The powertrain configurations are identical, with the same engine and transmission setups.
2
1
Share

Which Material is More Durable for Car Covers?

TPU material is more durable. Paint protection film, also known as invisible car cover, is a high-performance and environmentally friendly new type of film. Currently, there are mainly two types of materials for paint protection films on the market: PVC and TPU. Due to the difference in materials, their effects, lifespan, and price vary. Below is a related introduction to car covers: 1. PVC: PVC, scientifically known as polyvinyl chloride, is a widely used plastic in daily life. PVC material is relatively hard, lacks flexibility, and is thicker. PVC car covers mainly rely on hardness to protect the car body. Due to the material, PVC films are prone to poor adhesion and are generally not edged during installation. They have a shorter lifespan but are cheaper in price. 2. TPU: TPU, thermoplastic polyurethane material, is soft, highly flexible, and has good extensibility. It is relatively thin and highly transparent. TPU material has the function of thermally sensitive automatic scratch repair. The abrasion resistance, corrosion resistance, and UV resistance of TPU material are excellent, and it is recyclable, making it more environmentally friendly. It has a longer lifespan but is relatively more expensive.
15
0
Share

What is the cooling capacity of a car air conditioner?

The following is relevant information about cooling capacity: 1. Cooling capacity of a 1-horsepower air conditioner: The cooling capacity of a 1-horsepower air conditioner is generally between 2200-2600W, with the international standard being 2300W and the Chinese standard being 2500W. Air conditioners are usually labeled by their cooling capacity, but the heating capacity is generally 10-15% higher than the cooling capacity. For example, if the cooling capacity is 2300W, the heating capacity is usually around 2600W. Air conditioners are generally classified into the following types: 1P (2200-2600W), 1.5P (3200-3600W), 2P (4500-5200W), 3P (6500-7300W), 4P (8900-9500W), and 5P (12000W). These classifications are based on cooling capacity; the heating capacity can be calculated by adding 10%. 2. Definition of air conditioner cooling capacity: 2500W cooling capacity equals 1 horsepower (P); 3500W equals 1.5P; 5000W equals 2P; 7000W equals 3P; 12000W equals 5P.
9
3
Share

Is Installing a Roof Rack Illegal?

Installing a roof rack privately is not illegal as long as it does not exceed the specified height. Exceeding the height limit will result in a 1-point penalty from traffic police. Below is more information about installing roof racks on vehicles: 1. Legal Basis: Article 54 of the "Regulations for the Implementation of the Road Traffic Safety Law." 2. Height Regulations: (1) For heavy and medium-duty trucks and semi-trailers, the height of the load from the ground must not exceed 4 meters; for vehicles carrying containers, it must not exceed 4.2 meters. (2) For other motor vehicles carrying goods, the height from the ground must not exceed 2.5 meters. (3) For motorcycles, the height of the load from the ground must not exceed 1.5 meters, and the length must not exceed the body by 0.2 meters. The width of the load on two-wheeled motorcycles must not exceed the handlebars by 0.15 meters on each side; for three-wheeled motorcycles, the width must not exceed the body. Passenger cars are not allowed to carry goods except on external roof racks and built-in luggage compartments. For passenger cars carrying goods on roof racks, the height from the roof must not exceed 0.5 meters, and the height from the ground must not exceed 4 meters.
10
2
Share

What are the symptoms of a faulty intercooler?

Intercooler is an important component for turbocharged engine cooling. When the intercooler is damaged, malfunctions are likely to occur. Symptoms of intercooler failure: The intercooler is a supporting component for turbocharging and is only used in vehicles equipped with turbocharged engines. The function of the intercooler is to lower the temperature of the compressed air, thereby reducing engine load, increasing air intake, and enhancing engine power. Intercoolers generally come in two forms: air-cooled and water-cooled. When the intercooler is damaged, it will affect the engine's charging efficiency and may cause engine knocking, impacting the vehicle's normal operation. If the vehicle experiences reduced power, increased fuel consumption, or black smoke from the exhaust during regular use, the intercooler should be inspected in more detail to prevent damage. Intercooler cleaning method: Fill the intercooler with a water solution containing about 2% soda ash at a temperature of 70-80°C; let it sit for about 15 minutes, then shake it back and forth several times before draining the cleaning solution; rinse with a clean water solution containing about 2% soda ash until it is relatively clean; finally, flush with clean hot water at 80-90°C until clear water comes out.
7
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.