How Many Feet Should Be Used for an Automatic Transmission?

1 Answers
JulietDella
07/29/25 10:11pm
It is recommended to use one foot to operate an automatic transmission. Whether it's a manual or automatic transmission, the right foot should be used to control both the accelerator and the brake. Additional Information: 1. During normal economical driving, it's essential to release the accelerator pedal once the engine speed rises to a certain level, then gently press the accelerator again. This action will cause the engine speed to drop, completing the gear upshift. Developing this habit during daily driving can significantly reduce overall fuel consumption. 2. When parking for an extended period, shift into N (Neutral) gear and engage the parking brake or step on the foot brake. 3. During normal driving, the left foot should rest on the floor in a standby position, while the right foot controls the accelerator. Using both feet to drive an automatic transmission vehicle is not recommended.
Was this review help?
11
3
Share
More Forum Discussions

Where to Add Windshield Washer Fluid in Q5?

Audi Q5's windshield washer fluid needs to be added to the reservoir, which is located in the engine compartment of the vehicle. Open the engine hood, and you can find it in the upper right corner near the driver's side. Composition of windshield washer fluid: It consists of water, alcohol, ethylene glycol, corrosion inhibitors, and various surfactants. Functions of windshield washer fluid: 1. Cleaning the windshield. 2. Anti-freezing function. 3. Anti-fog function. 4. Lubrication function. 5. Anti-corrosion function. 6. Anti-static function. Audi Q5's body dimensions: The length, width, and height of the body are 4629mm, 1898mm, and 1655mm respectively.
13
5
Share

How Long Does the Driving Theory Course Take?

Here is the introduction regarding the duration of the driving theory course: 1. The "Motor Vehicle Driver Training Syllabus" stipulates: For C1 and C2 (C1 refers to small cars, C2 refers to small automatic transmission cars) class driver's licenses, 300 hours of theoretical course training and 55 hours of practical operation training are required before the exam. 2. No more than 6 hours of theoretical training per day: To ensure learning quality and prevent cramming, the "Syllabus" also stipulates that each student's theoretical training time should not exceed 6 hours per day, and practical operation training time should not exceed 4 hours per day. After completing 30 class hours, you can schedule the exam for Subject 1.
20
0
Share

Method for Resetting the Maintenance Reminder on the 2018 Discovery Sport

Method for resetting the maintenance reminder on the 2018 Discovery Sport: 1. With the engine turned off, press and hold the short-distance trip counter reset button located below the tachometer. 2. Turn the ignition to the ON position, then release the short-distance trip counter reset button. The display will show the "SERVICE" indicator. 3. Pull out the minute button on the clock and turn it to the right. The mileage will appear on the display. 4. Turn off the engine to reset the reminder message. 5. Turn the ignition to the ON position again, and the "SERVICE" indicator should disappear.
8
3
Share

Is the Driver's Card One Card per Vehicle?

Driver's cards are not issued on a one-card-per-vehicle basis; generally, it's one card per person. Below is relevant information about automotive driver's cards: 1. Definition: The Motor Vehicle Driver Traffic Safety Information Card is an electronic information carrier that records basic information about a driver's traffic violations, penalty points, traffic accidents, and traffic safety education. It enables quick verification of the authenticity of a driver's license information and allows on-site payment of traffic violation fines. 2. Benefits: The driver's card provides services such as traffic violation inquiries, self-service handling of violations, SMS notifications of violations, and vehicle inspection reminders. When traffic violations occur, drivers no longer need to visit traffic violation processing centers to pay fines.
12
1
Share

What is the difference between Mercedes-Benz GL and GLS?

Here are the differences between Mercedes-Benz GL and GLS: 1. Exterior: 1. Front grille: The Mercedes-Benz GL features a dual-slat grille design, while the GLS has a dual-slat perforated grille design. 2. Lighting: The GL comes with xenon smart headlights, whereas the GLS uses an LED lighting system. 3. Wheels: The GL is equipped with 20-inch wheels, while the GLS has 21-inch light alloy wheels. 2. Powertrain: 1. The GLS is paired with a 9-speed automatic transmission, while the GL comes with a 7-speed automatic transmission. 2. The GLS adds two configurations: side impact protection and front passenger airbags.
17
0
Share

Can the driver's license photo cover the eyebrows?

No. Exposing the ears and eyebrows is a basic requirement for the photo. Below is extended information regarding the size requirements for driver's license photos: 1. Portrait requirements: A recent front-facing, bareheaded, colored, single-person half-length small one-inch photo of the driver's license applicant taken within the last 6 months. 2. Driver's license photo dimensions: The photo size should be 3.2cm × 2.2cm, with the head length between 1.9cm and 2.2cm, and the head width between 1.4cm and 1.6cm, on a white background. 3. Dress code: No uniforms should be worn in the photo, and the image should be clear and natural in appearance.
18
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.