How many factories does Mercedes-Benz have in China?

What are the reasons for stalling in D gear?

The reasons for stalling in D gear are: 1. The vehicle uses poor-quality gasoline, causing severe carbon buildup in the engine and leading to stalling; 2. The fuel injector or throttle valve malfunctions, resulting in fuel leakage; 3. The throttle valve is clogged, or the motor carbon brush contact fails. D gear is the forward gear of an automatic transmission. Other gears in an automatic transmission car are: 1. P gear is the parking gear; 2. R gear is the reverse gear; 3. L gear is the low-speed gear; 4. S gear is the sport mode. The correct way to start an automatic transmission car is: 1. Move the gear selector to the intended driving position before pressing the accelerator pedal; 2. When pressing the accelerator, avoid stomping on it suddenly—press it slowly to gradually accelerate.

7

0

Share

What car model is represented by five vertical lines?

Five vertical lines represent the Weltmeister (WM) Motor brand. Taking the Weltmeister EX6 400 as an example, it is a mid-size 5-door 5-seat SUV with body dimensions of 4802mm in length, 1839mm in width, and 1710mm in height, with a wheelbase of 2715mm. The Weltmeister EX6 400 features front-wheel drive, with a MacPherson strut independent suspension at the front and a variable cross-section longitudinal arm torsion beam suspension at the rear. It is equipped with a permanent magnet front-mounted single motor and a single-speed transmission for electric vehicles, delivering a total motor power of 160 kW and a total motor torque of 315 Nm.

6

1

Share

What type of oil does the Chevrolet Trax use?

The Chevrolet Trax uses 5W30 grade engine oil, also known as engine lubricant, which serves to lubricate and reduce friction, assist in cooling, seal against leaks, prevent rust and corrosion, and provide shock absorption for the engine. The Chevrolet Trax is a compact SUV. Taking the 2021 Chevrolet Trax Automatic Power Edition as an example, its body dimensions are: length 4270mm, width 1791mm, height 1618mm, with a wheelbase of 2570mm. The 2021 Chevrolet Trax Automatic Power Edition is equipped with a 1.0T turbocharged engine, delivering a maximum power of 92kW at 5800rpm and a maximum torque of 180Nm.

5

4

Share

What is the logo of the Bugatti Veyron?

The logo of the Bugatti Veyron is BUGATTI. Taking the 2008 Bugatti Veyron as an example, its body dimensions are: length 4462 mm, width 1998 mm, height 1204 mm, wheelbase 2710 mm, fuel tank capacity 100 liters, and body structure is a 2-door, 2-seater hardtop sports car. The 2008 Bugatti Veyron is equipped with an 8.0-liter quad-turbocharged engine, with a maximum power of 736 kW, maximum power speed of 6000 rpm, maximum torque of 1250 Nm, and is paired with a 7-speed dual-clutch transmission. It adopts double-wishbone independent suspension for both front and rear suspension types.

15

1

Share

What type of transmission does the MG HS use?

The transmission used in the MG HS varies depending on the model: 1. The 1.5T model is equipped with a 7-speed dual-clutch transmission; 2. The 2.0T model is equipped with a 6-speed dual-clutch transmission. Taking the 2020 MG HS Automatic Two-Wheel Drive Super Luxury Edition as an example, it is a compact SUV with body dimensions of 4873 mm in length, 1852 mm in width, and 1470 mm in height, a wheelbase of 2850 mm, and a fuel tank capacity of 62.5 liters. The 2020 MG HS Automatic Two-Wheel Drive Super Luxury Edition is powered by a 1.5-liter turbocharged engine with a maximum power of 127 kW and a maximum power speed of 5600 rpm.

8

2

Share

How to Diagnose and Fix Connecting Rod Bearing Noise?

Connecting rod bearing noise can be diagnosed and fixed by the following methods: 1. If there is abnormal noise during idle operation, which becomes more obvious as the speed increases, and a clanking sound is heard when the oil filler cap is removed, it indicates connecting rod bearing noise. Check if the connecting rod bolts are loose; 2. Push and pull the connecting rod cap up and down by hand to check. If there is excessive play, it means the connecting rod bearing is excessively worn and should be replaced with a new one; 3. If the noise is louder near the side of the engine oil pan, the oil pressure gauge shows a drop, and after the engine cools down, metal alloy particles are found in the oil drained from the crankcase, it indicates that the alloy layer of the connecting rod bearing has peeled off. Replace the connecting rod bearing and check if the connecting rod journal is damaged.

15

0

Share

How many factories does Mercedes-Benz have in China?

What are the reasons for stalling in D gear?

What car model is represented by five vertical lines?

What type of oil does the Chevrolet Trax use?

What is the logo of the Bugatti Veyron?

What type of transmission does the MG HS use?

How to Diagnose and Fix Connecting Rod Bearing Noise?

What does PCS mean on the car dashboard?

Where is Acura produced?

Where is Chaoyang Tires produced?

How to turn on the high beams on a Camry?