How many electric motors does the Sylphy Zero Emission have?

1 Answers
DelAlaina
07/29/25 11:18pm
The Sylphy Zero Emission has only one electric motor. It is a single-motor model, which is the pure electric version based on the gasoline-powered Sylphy. This motor has a maximum power of 80 kW and a maximum torque of 245 Nm. The dimensions of this car are 4677 mm in length, 1760 mm in width, and 1520 mm in height, with a wheelbase of 2700 mm. The motor is front-mounted, so the car is front-wheel drive. The Sylphy Zero Emission model uses ternary lithium batteries throughout its lineup, which have higher energy density and are lighter in weight. The range of this model is 338 kilometers, but in actual use, the range may be lower. The front suspension of this model uses a MacPherson independent suspension, while the rear suspension uses a torsion beam non-independent suspension.
Was this review help?
1
4
Share
More Forum Discussions

What are the causes of Audi adaptive headlight failure?

Audi adaptive headlight failures can have many causes, with common reasons including headlight unit malfunctions, rain/light sensor failures, etc. Professional diagnostic equipment is required to read the system's fault memory to further identify the cause of the failure. Fuse blown: When turning on the headlight switch, if neither high nor low beams work, check the fuse box for blown fuses, then inspect for faults between the car light switch and the dimmer switch. Dimmer switch failure: When using a screwdriver to bridge the dimmer switch's power line to the high and low beam terminals respectively, if both lights work, it indicates a dimmer switch failure. If only the high beam works when bridged while the low beam doesn't, the fault lies between the dimmer switch and the headlight or the low beam circuit.
18
0
Share

Why does the car accelerate normally when cold but lose power when warmed up?

This situation where the car accelerates normally when cold but loses power when warmed up is generally caused by poor signals from the coolant temperature sensor or carbon buildup in the intake system. It is recommended to first check the coolant temperature sensor at a repair shop. Possible reasons for normal acceleration when cold but power loss when warmed up include: 1. Engine mechanical system failure: such as low cylinder pressure leading to reduced engine power, which is more pronounced when the engine is cold, or excessive carbon buildup on intake valves and intake pipes; 2. Excessive carbon buildup on intake valves and intake pipes: causing the injected gasoline to be absorbed by the carbon deposits instead of entering the combustion chamber; 3. Engine management system failure: such as incorrect signals from coolant temperature or intake air temperature sensors, or circuit faults.
15
5
Share

Why can't the Audi car's wireless network connection be used?

Reasons: The car's wifi has restrictions; the signal is unstable. The following is an introduction about Audi: 1. Introduction: A German luxury car brand, its logo is four interlocking rings. It is now a subsidiary of Volkswagen Group, headquartered in Ingolstadt, Germany. 2. Development history: Audi cars use four rings as their logo. This is because in 1932, Audi merged with Horch, Wanderer, and DKW to form the 'Auto Union'. Each ring represents one company. The four rings are of the same size, interlocked side by side, symbolizing the equal status and close unity of the four companies, making the alliance unbreakable.
5
3
Share

Why is the Audi A6 accelerating slowly?

Audi A6's slow acceleration is likely due to insufficient engine power output. Here is some knowledge about the Audi A6: 1. Introduction: The Audi A6 is a luxury car produced by Audi, available in both sedan and station wagon variants. The Audi A6 incorporates Audi's high-tech proprietary technologies, further enriched with luxurious configurations and endowed with strong sports characteristics. Its features include luxury, dynamism, and sophistication. 2. Configuration: The enhanced luxury is mainly reflected in the BOSE sound system, TV/DVD, and refrigerator, all of which are top-tier global brand products.
8
1
Share

Odyssey Hybrid: Should You Use 92 or 95 Octane Gasoline?

According to the official vehicle manual recommendation, the Odyssey Hybrid should use 92 octane gasoline. In addition to checking the suitable gasoline grade in the vehicle manual, you can also find it indicated on the fuel tank cap. Typically, the appropriate gasoline grade can also be determined based on the engine's compression ratio. Vehicles with an engine compression ratio between 8.6-9.9 should use 92 octane gasoline, while those with a compression ratio between 10.0-11.5 should use 95 octane gasoline. However, with the application of some new technologies, the compression ratio alone cannot determine the gasoline grade to use. High compression ratio engines can also be tuned to use lower octane gasoline. This is because, besides the compression ratio, other factors such as ignition timing, turbocharging technology, and Atkinson cycle technology also play a role. Generally, the higher the gasoline octane number, the higher the octane value and the better the anti-knock performance. 92 octane gasoline contains 92% isooctane and 8% n-heptane, while 95 octane gasoline contains 95% isooctane and 5% n-heptane. If the Odyssey Hybrid occasionally uses the wrong gasoline grade, simply switch back to the correct grade after consumption. However, long-term use of the wrong gasoline grade can have the following effects: For vehicles recommended to use lower octane gasoline, using higher octane gasoline will not cause damage, but the increase in octane value will alter the fuel's ignition point, leading to delayed combustion in the engine. This means both the engine's power output and thermal efficiency will decrease, resulting in poorer performance in practical driving experience. For vehicles recommended to use higher octane gasoline, using lower octane gasoline can cause engine knocking. Due to the significantly lower octane value, the gasoline's ignition point decreases, causing premature ignition during the compression stroke. If combustion occurs before the spark plug ignites during the compression stroke, resistance will arise during the upward stroke. This resistance makes the engine run very unstably. If the knocking is imperceptible, it only increases noise without obvious damage to the engine. However, if noticeable knocking occurs, it indicates severe engine conditions. The vibrations not only affect driving stability but also cause abnormal wear on pistons and cylinders, and in severe cases, can lead to cylinder scoring.
10
5
Share

What is the reason for the Audi A6 shifting from D gear to S gear while driving?

It may be a transmission failure, it is recommended to go to a 4S shop for repair as soon as possible. The following is an introduction to the Audi A6: 1. Introduction: The Audi A6 is a luxury car produced by Audi, available in both sedan and station wagon models. The Audi A6 incorporates Audi's high-tech exclusive technology, further enriches the luxurious configuration, and endows it with super strong sports characteristics. Its characteristics are luxury, dynamism, and maturity. 2. Configuration: The more luxurious features are mainly reflected in the BOSE sound system, TV/DVD, and refrigerator, all of which are world-class brand products.
13
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.