···
Log in / Register

How many driving modes does the Exeed TXL have?

5 Answers
ParkerLee
07/29/2025, 06:59 PM

Exeed LX is equipped with three driving modes: Economy, Standard, and Sport. Characteristics of the three modes: Users can choose according to their needs. The Standard mode is normal, the Economy mode has weaker power but is more fuel-efficient, and the Sport mode offers quicker power response. Exeed LX's engine: The 1.6TGDI engine in the Exeed LX clearly has no problem driving the entire vehicle body. Although it cannot be described as light, it does not feel excessively heavy either. The throttle pedal is tuned to be quite linear, with power output roughly corresponding to how much you press it. When the Exeed LX is switched to Sport mode, the throttle response becomes significantly faster, power output is more direct, and the suspension tightens up, making it easier to achieve a good sense of acceleration.

Was this review help?
12
2
Share
DeAurora
08/15/2025, 08:45 PM

I drive the Exeed TXL, which comes with three practical driving modes: Eco, Sport, and Snow. For city driving, I usually switch to Eco mode, where the throttle response is gentler, gear shifts are smoother, and fuel consumption is significantly reduced. It offers a quiet and comfortable ride, perfect for traffic jams and daily commutes. When hitting the highway or mountain roads, I switch to Sport mode—the engine responds much quicker, acceleration is more dynamic, and while the steering feels slightly heavier, the enhanced handling boosts driving fun instantly. On rainy, snowy, or slippery roads, Snow mode takes over, automatically limiting wheel spin to keep the car stable and reduce the risk of losing control. These three modes can be toggled with a single button on the steering wheel, making it intuitive and convenient. I often adjust them based on road conditions, feeling like the car is smarter and safer, suitable for both new and experienced drivers.

Was this review help?
5
1
Share
Expand All
MacCorey
10/18/2025, 02:04 AM

The Exeed TXL is equipped with three driving modes: Eco, Sport, and Snow. The Eco mode significantly saves fuel by reducing engine output and making gear shifts smoother, making long-distance driving less tiring. The Sport mode is completely different, delivering powerful acceleration with a quick response like a race car, especially useful for high-speed overtaking. The Snow mode is effective on low-temperature roads, limiting slippage to ensure driving safety. As an experienced driver, I find these modes make driving more flexible. The electronic controls are simple and intuitive, allowing timely switching based on weather and road conditions without needing to manually adjust settings. Driving in snowy conditions feels much more secure, making the car feel smart and reliable.

Was this review help?
12
0
Share
Expand All
McLuke
12/01/2025, 01:44 AM

I drive the Exeed TXL SUV, which offers three driving modes to switch between: Eco, Sport, and Snow. The Eco mode is fuel-efficient and quiet, requiring just a light press on the accelerator, making it ideal for city traffic during rush hours. The Sport mode delivers more powerful performance, which is great for highway driving. The Snow mode is effective for preventing skidding in winter. Switching between modes is quite convenient—just press the button on the steering wheel to select, and it automatically adjusts the driving parameters without requiring any professional knowledge. This makes driving more adaptable to different road conditions, hassle-free and safe, especially for beginners who can easily get the hang of it, and it also reduces fatigue during long drives.

Was this review help?
15
5
Share
Expand All
Freya
01/21/2026, 03:06 AM

The Exeed TXL offers three driving modes: Eco, Sport, and Snow, which are quite comprehensive. I often take my family on trips. The Eco mode is fuel-efficient and eco-friendly for city driving, with gentle engine output that's not noisy, allowing the kids in the back to rest peacefully. On the highway, I switch to Sport mode for stronger power and faster acceleration, making long journeys less monotonous. When it snows, I immediately switch to Snow mode, ensuring the car remains stable and doesn't skid, significantly enhancing the safety of the whole family. Mode switching is simple with button operation, and the electronic system handles everything automatically, making the driving experience more personalized. Daily driving is energy-saving and hassle-free, and it also helps extend the car's lifespan.

Was this review help?
17
5
Share
Expand All
More Forum Discussions

can you use resolve on car upholstery

Yes, you can use Resolve cleaner on car upholstery, but it requires caution and is best suited for stain-resistant fabrics like polyester or nylon. Using it on delicate materials such as leather, suede, or velour is not recommended and can cause discoloration or damage. The key is to always test on a hidden area first, like under a seat, to check for colorfastness. Resolve products are formulated with surfactants and solvents designed to break down tough, greasy stains. For automotive use, this makes them effective on common spills like coffee, soda, or food grease. However, their strength can also be a drawback if not used properly. How to Use Resolve Safely on Car Upholstery: Vacuum Thoroughly: Remove any loose dirt or debris from the fabric. Spot Test: Apply a small amount of Resolve to an inconspicuous area. Blot with a clean, white cloth. If no color transfers to the cloth and the fabric appears undamaged after drying, it should be safe to proceed. Apply Sparingly: Spray or dab a modest amount directly onto the stain. Do not oversaturate the fabric, as excess moisture can seep into the cushion foam underneath, potentially leading to mold or mildew. Agitate Gently: Use a soft-bristled brush (an old toothbrush works well) to gently work the cleaner into the fibers. Blot, Don't Rub: Use a clean, absorbent microfiber cloth to blot the area repeatedly. Rubbing can spread the stain and damage the fabric. Rinse (Crucial Step): Dampen another cloth with clean water and blot the area to rinse out the cleaning solution. Resolve leaves a soapy residue that can attract more dirt if not rinsed. Dry Completely: Use a dry cloth to absorb moisture and allow the area to air dry completely. You can roll down a window on a sunny day to speed up the process. Effectiveness on Common Automotive Stains Stain Type Expected Effectiveness with Resolve Key Consideration Coffee & Soda High Blot fresh spills immediately. Sugar content can be sticky. Grease & Oil High Resolve's solvents are particularly effective on grease-based stains. Ink Moderate to High Success depends on the ink type. Act quickly for best results. Blood Moderate Use cold water for rinsing, as hot water can set the protein stain. Dirt & Mud Low to Moderate Let mud dry completely, vacuum, then treat any remaining stain. For modern cars with advanced stain-resistant coatings, a milder interior cleaner might be a safer first choice to preserve the fabric's treatment. For leather seats, always use a pH-balanced leather cleaner and conditioner.
11
1
Share

can.autozone clear codes on a new car

Yes, you can use an OBD2 scanner from a place like AutoZone to clear diagnostic trouble codes (DTCs) on a new car, but it's generally not recommended. Clearing the codes erases the car's computer memory, including readiness monitors needed for emissions testing, and simply removes the warning light without fixing the underlying problem. On a new vehicle, this action can potentially void aspects of your warranty if it's linked to an unrepaired issue. When a check engine light appears, the powertrain control module (PCM) stores a specific code. AutoZone employees will typically plug in a scanner to read these codes for free. While they can clear them, this is akin to dismissing a "Check Engine" alert on your phone without reading the message. The light will stay off temporarily, but if the problem persists, the code and light will return. The most significant risk for a new car is interfering with the manufacturer's warranty. If a recurring problem leads to a major failure, the dealership's service department can see if codes have been recently cleared. If you cleared a code related to, say, a misfire and then the engine fails, the manufacturer might deny the warranty claim, arguing you ignored a clear warning sign. The correct procedure is to read the codes first . Use the code as a starting point for diagnosis. For example, a P0420 code indicates a potential catalytic converter issue. On a new car, this should be addressed by the dealership under warranty. Having the code stored provides the technician with crucial evidence. Common Code Description Likely Cause Recommended Action for New Car P0301 Cylinder 1 Misfire Faulty spark plug, coil, or fuel injector Dealer service immediately P0455 EVAP System Large Leak Loose or faulty gas cap Tighten cap, clear code, see if it returns P0420 Catalyst System Efficiency Failing catalytic converter Dealer service under warranty P0128 Coolant Thermostat Thermostat stuck open Dealer service for replacement U0100 Lost Communication Network communication error Dealer diagnosis required Instead of clearing the code, take a picture of the code screen with your phone and schedule a service appointment. This provides the technician with a direct clue, leading to a faster and potentially warranty-covered repair.
5
4
Share

can your maf stop a car from starting

Yes, a faulty Mass Air Flow (MAF) sensor can absolutely prevent your car from starting. It's a common cause of no-start conditions, especially when the engine cranks but doesn't fire up. The MAF sensor's job is to measure the amount of air entering the engine so the car's computer (the Engine Control Unit or ECU) can calculate and deliver the correct amount of fuel. If the MAF sends incorrect or no data, the ECU can't create the proper air-fuel mixture, often resulting in a failure to start. When a MAF sensor fails, it typically sends a signal that is outside its normal operating range. The ECU detects this fault and may trigger the check engine light. More critically, the ECU often has a built-in fail-safe or "limp mode." In this mode, it ignores the MAF sensor data and uses pre-programmed default values based on other sensors, like the throttle position. However, these default values are often not precise enough for the engine to start, particularly when cold. You might experience the engine cranking normally but never catching. A failing MAF sensor usually gives warning signs before it fails completely. These include: Rough idling or the engine stalling shortly after starting. Hesitation and jerking during acceleration. A significant drop in fuel economy . The car starting and then immediately dying. Diagnosing this issue involves a few steps. A mechanic will first check for trouble codes with an OBD-II scanner. While a specific MAF sensor code is a strong indicator, sometimes the problem manifests as codes for the fuel system being too "lean" or "rich." The next step is to visually inspect the sensor for contamination or damage, and then use a multimeter or scan tool to check its live data stream to see if the readings are logical. Common No-Start Causes vs. MAF Failure Symptoms Key Diagnostic Clue Faulty MAF Sensor Engine cranks but won't start; may have prior symptoms like rough idle. Live data from MAF sensor shows illogical readings (e.g., 0 grams/second with engine running). Dead Battery No crank, no start; clicking sound; dim lights. Voltage reading below 12V. Failed Starter Motor Loud click or grinding noise when turning key, but no crank. Does not engage the engine flywheel. Fuel Pump Failure Engine cranks normally but won't start; no sound from fuel tank when key is turned to "on." No fuel pressure at the fuel rail. Ignition Switch Problem No crank, no start; dashboard may not light up. No power delivered to starter circuit.
14
1
Share

can you use shampoo to clean your car

No, you should not use regular hair shampoo to clean your car. While it might create suds, shampoo is formulated for the pH level of your scalp and hair, not for automotive paint. Using it can gradually strip the protective wax and sealant from your car's clear coat, making the paint dull and vulnerable to UV damage, oxidation, and scratches over time. For a safe and effective wash, you need a pH-balanced car shampoo specifically designed to lift dirt without damaging the paint's protective layers. The primary risk lies in the chemical formulation. Hair shampoo often contains conditioners, fragrances, and oils meant for hair, which can leave a filmy residue on your paint. More critically, its pH level is unlikely to be neutral. A pH level measures how acidic or alkaline a substance is on a scale of 0-14, with 7 being neutral. Automotive paint thrives with cleaners that are as close to pH-neutral as possible. Strongly alkaline or acidic formulas can degrade waxes and even etch the clear coat. For a proper wash, invest in a dedicated car wash soap. These products are engineered to suspend dirt particles in soapy water, allowing them to be rinsed away without scratching the surface. They also often include lubricants and gloss enhancers that help protect your paint. The cost difference is minimal compared to the potential expense of correcting paint damage later. Characteristic Hair Shampoo pH-Neutral Car Shampoo Primary pH Level Often slightly acidic (pH 4-6) for hair Formulated to be pH-neutral (pH 7) Additives Conditioners, perfumes, oils Paint-friendly lubricants, gloss agents Effect on Car Wax Can strip protective layers quickly Gentle, designed to preserve wax Residue Leaves a filmy, sticky residue Rinses cleanly without residue Cost per Wash Very low Low (a bottle lasts for many washes) Long-Term Paint Health Promotes oxidation, dullness, and swirl marks Protects gloss and integrity of clear coat Stick to the right tool for the job. Using the correct car shampoo is a fundamental step in proper paint maintenance and is a non-negotiable for anyone who wants to preserve their car's value and appearance.
10
2
Share

can you use wd40 on car ignition ford

No, you should not use standard WD-40 on your Ford's car ignition. While it might seem like a quick fix for a sticky key, WD-40 is a water displacer and penetrant , not a dedicated lubricant. Its petroleum-based formula can attract dust and grime over time, which will gum up the delicate tumblers and wafer pins inside the ignition cylinder, leading to worse problems down the road. For a safe and effective solution, you need a lubricant specifically designed for locks. The best products are dry lubricants like graphite powder or Teflon (PTFE)-based sprays . These won't attract dirt and provide smooth lubrication without residue. Graphite is a classic choice, but modern synthetic dry lubricants are often easier to apply cleanly. If the ignition is sticking, the issue might be with the key itself. A worn or slightly bent key can cause difficulty turning. Try using a spare key to see if the problem persists. For modern Fords with push-button start , there is no traditional ignition cylinder to lubricate. Any issues are likely electronic and require professional diagnosis. Recommended Product Type Key Benefit Potential Drawback Graphite Powder Dry Lubricant Doesn't attract dirt, long-lasting Messy application, can clump in humidity Silicone Spray Dry Lubricant Clean, safe on plastics/electronics May require more frequent reapplication Teflon (PTFE) Spray Dry Lubricant Very slick, dust-resistant Can be more expensive WD-40 Specialist Dry Lube Dry Lubricant From same brand, but correct formula N/A Electrical Contact Cleaner Cleaner Cleans corrosion without residue Not a lubricant, use before applying lube The correct procedure is to first spray a burst of electrical contact cleaner into the ignition to dissolve any existing gunk. Let it fully evaporate, then apply a very short burst of your chosen dry lubricant. Insert and turn the key several times to work it in. Avoid over-applying any product.
7
4
Share

can your car sit idol for a long time

Yes, a car can sit idle for a long time, but you must take proactive steps to prevent significant and costly damage. Simply parking it and walking away is a recipe for problems. The core issues are the battery draining , fuel degrading , tires developing flat spots , and fluids breaking down or becoming contaminated. For periods exceeding four weeks, proper preparation is not just recommended; it's essential for preserving your vehicle's health and value. The most immediate casualty of long-term parking is the 12-volt battery . Modern cars have constant low-level draws from systems like the alarm and onboard computers. Without being driven, a battery can be completely drained in as little as four weeks, and a deeply discharged battery can suffer permanent damage, requiring replacement. Using a battery maintainer (or "trickle charger") is the single best way to keep the battery at optimal charge. Fuel system deterioration is another major concern. Gasoline begins to oxidize and break down after about three months, potentially leading to gum and varnish deposits that clog fuel injectors and the fuel line. For storage beyond 90 days, adding a fuel stabilizer to a nearly full tank is crucial to preserve the fuel's quality. A full tank also prevents moisture condensation inside the tank, which can cause rust. Here’s a quick reference table for potential issues and timelines: Potential Issue Typical Onset Timeline Consequences Preventive Measure Battery Drain 2 - 4 weeks Permanent battery damage, unable to start. Use a battery maintainer. Tire Flat Spots 1 - 2 months Permanent tire deformation, vibration while driving. Inflate tires to max PSI on sidewall; move car slightly periodically. Fuel Degradation 3 - 6 months Clogged fuel injectors, engine starting/running issues. Fill tank + add fuel stabilizer. Fluid Breakdown 6+ months Reduced lubrication, corrosion inside engine/brakes. Change oil before storage; consider brake fluid flush. Rodent Infestation Any time Chewed wires, hoses, and interior damage. Place rodent repellents; avoid parking near brush. Other vital steps include giving the car a thorough clean, inside and out, to protect the paint and interior surfaces. If possible, have a friend start the car and let it run until fully warmed up every few weeks, which helps circulate fluids and recharge the battery slightly. For storage over six months, more extensive prep, like jacking the car up to take weight off the tires, may be necessary. The key is to think about preserving all the systems that movement normally maintains.
6
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.