How Many Digits is the VIN?

1 Answers
Brody
07/30/25 3:37am
VIN is 17 digits, which is a set of numbers used on a vehicle to identify the manufacturer, engine, chassis number, and other performance data of the vehicle. The locations of the VIN include: 1. On the vehicle model nameplate; 2. Left side of the dashboard; 3. Inside the engine compartment; 4. Vehicle registration certificate; 5. Lower left corner of the windshield. The meaning of the VIN is: 1. The first digit represents the country or region of production code; 2. The second digit represents the vehicle manufacturer code; 3. The third digit represents the vehicle type code; 4. The fourth to eighth digits represent vehicle characteristics; 5. The ninth digit represents the check digit; 6. The tenth digit represents the model year; 7. The eleventh digit represents the assembly plant; 8. The twelfth to seventeenth digits represent the serial number.
Was this review help?
4
1
Share
More Forum Discussions

What type of battery does the Wuling Zhiguang use?

The Wuling Zhiguang uses a 12V 48Ah 450A SAE battery. The functions of the battery are: 1. When starting the engine, the battery supplies power to the starting system, ignition system, and electronic fuel injection system; 2. When the engine is stopped or idling at low speed, it powers the vehicle's electrical equipment; 3. When the generator output is insufficient, it can assist in supplying power to electrical equipment; 4. It mitigates voltage surges in the electrical system, protecting the vehicle's electronic devices; 5. It can store excess electricity generated by the alternator. Taking the 2020 Wuling Zhiguang as an example, it is a microvan with body dimensions of: length 3797mm, width 1510mm, height 1820mm, and a wheelbase of 2500mm.
20
0
Share

What is the speed limit in highway tunnels?

Highway tunnels have a speed limit of 60 to 80 kilometers per hour. Tunnels are engineering structures embedded within the ground. Here is relevant information about driving in tunnels: 1. Use of lights: When entering a highway tunnel, you should use low beam headlights. If there are no lights inside the tunnel, you should alternately use high and low beams to signal. 2. Laws and regulations: According to Article 58 of the Implementation Regulations of the Road Traffic Safety Law of the People's Republic of China, when driving at night without street lights, poor lighting, or in conditions of low visibility such as fog, rain, snow, dust, or hail, motor vehicles should turn on headlights, position lights, and rear lights. However, when following another vehicle closely in the same direction, high beams should not be used. Motor vehicles driving in foggy conditions should turn on fog lights and hazard warning flashers.
17
1
Share

Where is the cabin air filter located in the Audi A6L?

The cabin air filter in the Audi A6L is located beneath the glove compartment on the passenger side. Simply remove the lower interior trim panel and open the cabin air filter cover to replace the filter. The cabin air filter is a crucial component in vehicles and requires regular replacement. Generally, it should be replaced every 10,000 kilometers. Failure to replace the cabin air filter for an extended period can impair the air conditioning's performance and negatively affect the health of the vehicle's occupants. When using the air conditioning for cooling, it is necessary to press the AC button. This action engages the compressor clutch, allowing the engine to drive the compressor. The compressor then continuously compresses the refrigerant and delivers it to the evaporator. The refrigerant commonly used in automotive air conditioning systems is R134a, which also requires periodic replacement. Neglecting to replace the refrigerant can result in slower cooling speeds and reduced cooling efficiency.
18
2
Share

What does the car with an exclamation mark mean?

What does the car with an exclamation mark mean depends on the situation: 1. A triangle with an exclamation mark in the middle is a general fault indicator light; 2. A circle with parentheses and an exclamation mark in the middle is a brake system warning light; 3. A horizontal line with parentheses below and an exclamation mark in the middle is a tire pressure monitoring warning light, which illuminates when the pressure of a vehicle's tire is too low. The reasons for the exclamation mark appearing in the car are: 1. Parking sensor failure; 2. Brake pads worn beyond the limit; 3. Engine oil pressure sensor failure; 4. Insufficient brake fluid; 5. Fuel cut-off system intervention or failure; 6. The exclamation mark is a general fault light when it is an exclamation mark in the middle of a red triangle; 7. The exclamation mark is a steering system fault indicator light when it is next to a red steering wheel.
20
4
Share

Why is the fuel consumption of Trumpchi GS4 increasing?

Here are the reasons why the fuel consumption of Trumpchi GS4 is increasing: 1. Tire Pressure: Tire pressure does affect the vehicle's fuel consumption. Lower tire pressure causes the tires to flatten, increasing rolling resistance, which in turn leads to higher fuel consumption. 2. Dirty Engine Oil and Transmission Fluid: Engine oil and transmission fluid play a lubricating role in the engine and transmission, respectively. Over time, they inevitably become dirty. Dirty oil and transmission fluid reduce lubrication, causing the engine and transmission to consume more energy during operation, thus increasing fuel consumption. 3. Carbon Deposits: Carbon deposits can be considered the 'root of all evil,' as many engine faults are caused by them. Carbon deposits in the engine lead to a decrease in engine power, which correspondingly increases fuel consumption. Additionally, phenomena such as shaking, noise, detonation, and knocking are all related to carbon deposits.
11
2
Share

What is the normal engine RPM when driving at 120 km/h on the highway?

When driving at a high speed of 120 km/h, the engine RPM is generally around 3400 rpm. Here is some relevant information about engine RPM: 1. The relationship between vehicle speed and transmission: Vehicle speed = recommended engine RPM * transmission speed ratio * tire circumference. When a car is moving at high speed, lower engine RPM results in better fuel efficiency. However, fuel consumption evaluation isn't solely based on this factor. A good engine paired with an excellent transmission makes for a truly fuel-efficient and enjoyable driving experience. 2. RPM requirements for gear shifting: Different engines have different requirements. For modern passenger cars, the recommended shifting RPM is typically between 2500~3000 rpm, as the optimal driving RPM for most cars is around 2000 rpm. Shifting at excessively low RPM will cause the engine to operate at low speeds for prolonged periods, which is not good for the machine and doesn't actually save fuel.
9
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.