How Many Digits Are in a Car License Plate?

1 Answers
Mckenzie
07/29/25 1:43pm
Car license plates all consist of 5 digits. Relevant details are as follows: Common classifications of car license plates: They are typically divided into small vehicle license plates (blue background with white characters and white borders), new energy vehicle license plates (green background with black characters and black borders, gradient green), large vehicle license plates (yellow background with black characters and black borders), and Hong Kong/Macau entry-exit vehicle license plates (black background with white characters, white "HK" or "MO" characters, and white borders), etc. Composition of car license plate numbers: The front part of a car license plate consists of the province abbreviation and the prefecture-level city code, followed by five digits combining numbers and letters. Currently, the country implements a new license plate policy allowing self-selection of plate numbers, but the first two characters must be letters, which can be chosen at will, and the last three are numbers, which can also be freely selected.
Was this review help?
7
3
Share
More Forum Discussions

Where to Obtain the Vehicle Inspection Sticker?

Inspection stickers can be applied for at the Vehicle Management Offices of the Municipal or County Public Security Traffic Management Bureaus. Some post offices and banks also offer agency services. Below are the procedures and considerations for applying for a vehicle inspection sticker: 1. For registered motor vehicles, apply for the inspection sticker according to the following periods. (1) Passenger vehicles for commercial use must be inspected once a year within the first 5 years; after 5 years or more, every 6 months. (2) Trucks and large or medium-sized non-commercial passenger vehicles must be inspected once a year within the first 10 years; after 10 years or more, every 6 months. (3) Motorcycles must be inspected once every 2 years within the first 4 years; after 4 years or more, once a year. (4) Special school buses must be inspected every 6 months from the date of registration. (5) Non-special school buses must be inspected every 6 months after obtaining the school bus license plate. (6) Other motor vehicles must be inspected once a year. (7) Small and micro non-commercial passenger vehicles that have been registered for 6 years or more must be inspected once a year; after 15 years or more, every 6 months. 2. Application Conditions (1) The motor vehicle must have reached its inspection validity period. (2) Provide the proof documents required by laws, regulations, and departmental rules. (3) All road traffic safety violations and accidents involving the motor vehicle must be resolved.
8
0
Share

How to Check Mileage on a Mercedes-Benz?

Mercedes-Benz vehicles display the total mileage on the dashboard screen, which can be accessed by using the multifunction buttons on the steering wheel. The method involves first returning to the home page, then selecting the 'Trip' option, scrolling up or down to view instantaneous fuel consumption, average fuel consumption, total mileage, and other details. Navigate to the total mileage to see the reading. Below is some relevant information about car odometers: 1. The car odometer indicates the vehicle's speed in km/h (kilometers per hour). It consists of two meters: a speedometer and an odometer. These are typically located directly in front of the driver's position. Methods to verify mileage include assessing wear and tear or checking the vehicle's maintenance records at a 4S dealership. 2. The odometer records both total mileage and trip mileage (single journey). The trip mileage can be manually reset in the 'Trip' section of the onboard computer. Trip mileage, also known as 'trip distance,' is used to measure the distance between the starting point and destination. It can also help estimate fuel consumption. Total mileage records the cumulative distance the vehicle has traveled since it was manufactured.
16
3
Share

When Should Tires Be Replaced?

Tire replacement should be based on the following five criteria: 1. Check if the wear has reached the marked limit. During the production process, tires are designed with wear indicators. One is located in the tread grooves, spaced at intervals; the other is on the sidewall edge, marked by a small triangle. When the wear reaches these indicators, the tire must be replaced. 2. Replace immediately if the sidewall shows bulges. From the structural diagram, it's clear that tires are not just rubber; their inner layers are more complex than an Oreo. The weakest part is the sidewall. If a bulge appears, it indicates that the internal steel wires have broken or deformed. 3. Nails in the sidewall. The probability of a nail piercing the sidewall is very low unless done intentionally. Whether replacement is needed depends on the nail's location relative to the wear indicator (refer to Figure 1 for the sidewall wear indicator). If the nail is above the wear indicator, a patch can be applied. If it's below, tire replacement is recommended. 4. More than three patches on the tread. Occasional nails can be patched without issues—even three patches might be manageable. However, if there are more than three patches, especially if two are close together, the risk of a blowout increases during high-speed driving due to elevated tire temperatures. 5. Tread aging. Aging treads show fine cracks, which result from prolonged storage or excessive sun exposure. If cracks appear on the tread, replace the tire as soon as possible, and avoid high-speed driving.
9
1
Share

Which brand of transmission oil can be used for the Atenza?

The original transmission oil for the Atenza is Aisin brand. The relevant introduction to transmission oil is as follows: Function of transmission oil: Transmission oil is a lubricant used to keep the car's gear system clean, providing lubrication to extend the life of the transmission components. It also offers effective lubrication at low temperatures and reduces oil loss under harsh operating conditions. Types of transmission oil: It is divided into automatic transmission fluid (ATF) and gear oil. Automatic transmission fluid is specifically designed for automatic transmissions. Manual transmission oil, commonly referred to as gear oil, is mainly composed of petroleum-based lubricating oil or synthetic lubricating oil, blended with extreme pressure anti-wear agents and oiliness agents to form an important lubricant.
7
0
Share

What Are the Different Engine Arrangements?

Engine arrangements include inline, V-shaped, W-shaped, horizontally opposed, and radial. Here is the relevant information: 1. The most commonly used is the inline transverse arrangement, where four or more cylinders are aligned in a row on the crankshaft. The advantage is its simple structure, making it suitable for small cars. 2. The V-type arrangement divides the cylinders into two groups, installed alternately on the same crankshaft at a certain angle (usually 90 or 70 degrees). The advantages are compact size and reduced vibration. 3. The W-type is essentially two V-type engines combined. It is extremely complex in structure but more compact and efficient, often found in high-end luxury cars like Audi and Volkswagen. 4. The horizontally opposed arrangement also divides the cylinders into two groups but installs them opposite each other at 180 degrees on the same crankshaft. The advantages include lowering the engine bay height and effectively reducing vibration, commonly seen in sports cars like Subaru and Porsche. 5. The radial arrangement features cylinders arranged in a star shape around the crankshaft, making it ideal for streamlined aircraft bodies, often found in older propeller planes.
3
5
Share

What are the steps to replace the battery in the Accord key?

The steps to replace the battery in the Accord key are as follows: 1. Remove the mechanical key: Press the latch to pull it out and store the mechanical key safely; 2. Open the key cover: Use a screwdriver or similar tool, but wrap the tip with a cloth to prevent damage to the key. Also, be careful with the force applied to avoid breaking the key shell; 3. Locate the battery holder clip: Find the clip position on the battery holder. When removing the clip, identify the gap between the keys to fully open the key; 4. Replace the battery: The battery model used in the Accord is CR2032. Ensure the positive side is facing up during installation; 5. Reinsert the key into the keyhole: After replacing the battery, align both ends of the key, press firmly to close it, and reinsert the key into the keyhole to complete the battery replacement.
13
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.