How many degrees is it inside the car when it's minus 5 degrees Celsius outside?

1 Answers
RosalieLynn
07/30/25 6:05am
When it's minus 5 degrees Celsius outside, it's 3 degrees Celsius inside the car. Car insulation materials: Fiberglass, heat-resistant, thermal insulation. Refrigerated truck: It is a type of "specialized truck". It is specifically used for transporting perishable goods such as meat, fish, fresh fruits, and vegetables. These goods require maintaining a certain temperature, humidity, and ventilation conditions during transportation. To prevent the internal temperature from being significantly affected by external temperature changes, the vehicle body is required to have good thermal insulation performance. The body of a refrigerated truck is structurally equipped with insulation materials to reduce heat exchange between the inside and outside of the vehicle. The vehicle is equipped with cooling devices for temperature reduction, heating devices for temperature increase, ventilation devices for maintaining suitable temperature, humidity, and air exchange, as well as temperature measurement equipment.
Was this review help?
16
2
Share
More Forum Discussions

Can the sun film provided by Audi 4S store be used?

The sun film provided by Audi 4S store can be used, but its UV blocking rate and heat insulation effect are not as good as those of purchased ones. Heat insulation and sun protection: The film can effectively reduce the large amount of heat generated by infrared rays, significantly lowering the temperature of the car body and the interior. UV blocking: Medium and long waves of UV rays can penetrate thick glass. Applying a heat-insulating film can block 99% of UV rays, protecting the skin from damage and reducing the aging of car interiors. Safety and explosion-proof: The base layer of the film is made of polyester, which has excellent tear resistance and penetration prevention, preventing secondary injuries to passengers in case of accidental glass breakage. Reducing air conditioning energy consumption: Applying a heat-insulating film can compensate for some loss of air conditioning cooling capacity, preventing excessive interior temperature to a certain extent, thereby saving fuel consumption and reducing air conditioning energy consumption. Anti-glare: Maintaining eye comfort and reducing accidents caused by glare factors.
15
2
Share

How many grams of Freon should be added to the Baojun 730 air conditioner?

Baojun 730 air conditioner requires 650 grams of Freon. The function of car air conditioning: Car air conditioning refers to the air conditioning device installed in the car, which can cool, heat, ventilate, and purify the air inside the compartment, providing a comfortable riding environment for passengers, reducing driver fatigue, and improving driving safety. Method for adding Freon to car air conditioning: To add Freon, first connect the charging hose to the Freon bottle and then to the three-way valve. Then connect the three-way valve and pressure gauge to the three-way valve. Turn on the air conditioner for cooling. At this time, a pressure difference will be created between the Freon bottle and the air conditioning refrigeration system, achieving the purpose of adding Freon. When the pointer in the pressure gauge reaches around 0.5 MPa, you can stop adding Freon.
20
3
Share

What is the reason why the headlight washer of Audi A4L cannot retract?

The reasons why the BMW X3 air conditioner does not blow air when turned on may be due to faults in the blower and control system, or the air duct being blocked. The specific reasons are as follows: Blower issues: The blower is the core component of whether the car air conditioner blows air or not. If the blower is damaged, the car air conditioner will definitely not blow air. The cause of blower failure may be internal coil overheating damage or capacitor damage. You can judge whether it is faulty by turning the car air conditioner's wind speed and air volume to the maximum to listen to the sound of the blower. Air duct blockage: The outside air will be filtered by the air conditioner filter before entering the car, which will absorb many impurities in the air, so it is easy to cause blockage. Control system failure: If none of the above reasons apply, then the control system is faulty. The air door, control switch, and car air conditioner computer could all be the cause of the fault.
2
1
Share

Is the Baojun 510 equipped with a four-cylinder engine?

Baojun 510's engine is designed with 4 cylinders, and the entire lineup is equipped with a 1.5L version engine. Four-cylinder engine: A four-cylinder engine, also known as a four-cylinder power unit, is a machine capable of converting one form of energy into another more useful form of energy. Its main components include the cylinder block, crankcase, cylinder head, and cylinder gasket, among others. It is widely used in car engines, motorcycles, chainsaws, and other small-power machinery. Baojun 510: The Baojun 510 lineup is equipped with a naturally aspirated 1.5L engine, including both low-power and high-power versions. The low-power version has a maximum power output of 77 kW and a maximum torque of 135 N·m, while the high-power version delivers a maximum power of 82 kW and a maximum torque of 146.5 N·m. It offers three transmission options: a 6-speed manual transmission, a 5-speed AMT transmission, and a CVT continuously variable transmission.
13
4
Share

What is the issue with BMW charging system?

Introduction to the causes of BMW charging system abnormalities: 1. Battery leakage: Common leakage phenomena include: a) Poor sealing between the upper cover and the base tank or cracking of the sealing adhesive due to collision causing leakage; b) Acid leakage from the valve cap; c) Acid leakage at the terminal connections; d) Acid leakage at other locations. Measures: First conduct a visual inspection to identify the acid leakage location. Remove the cover plate to check for acid leakage traces around the valve cap, then open the valve cap to observe if there is any flowing electrolyte inside the battery. If no abnormalities are found after these steps, perform an airtightness test - bubbles indicate acid leakage. 2. Battery fails to charge: First check whether the charging circuit connection is reliable, inspect whether the wiring and plug contacts are intact, carefully examine if there is any "sparking" or arcing at the socket and plug, and check for any wire damage or disconnection. Measures: Check whether the charger is damaged and whether the charging parameters meet requirements: initial charging current should reach 1.6-2.5A/cell; maximum charging voltage should reach 14.8-14.9V/cell, charging to float charging transition current should reach 0.3-0.4A/cell, and float charging voltage should reach 14.0-14.4V/cell.
14
4
Share

What are the functions of the Skoda Rapid dashboard buttons?

Skoda Rapid dashboard buttons functions are as follows: the first button adjusts time and other data, press it and then use the right-side button for adjustments; the second button is used to switch between trip mileage and total mileage, and if the second button is pressed for more than 2 seconds, the trip mileage will be reset. The role of indicator lights on the dashboard: The most common indicator lights while driving, such as light signal indicators, turn signal indicators, parking lights, etc., serve to inform the driver about the status of various vehicle functions. The role of warning lights on the dashboard: They have an alerting function, such as fuel indicator lights, door status indicators, seat belt indicators, etc. Generally, warning lights turn off after the driver performs the corresponding action, for example, the seat belt indicator turns off when the seat belt is fastened. The role of malfunction indicator lights on the dashboard: The most important indicator lights, such as generator malfunction indicators, ABS malfunction indicators, transmission malfunction indicators, etc. Normally, these malfunction indicators rarely light up, or they may light up briefly when starting the engine and then turn off. If a malfunction indicator stays lit and is accompanied by a warning sound, it indicates that the vehicle has a malfunction or abnormality.
6
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.