How many days will it take for the car to arrive at the 4S store after being shipped?

1 Answers
MacHolden
07/29/25 1:27pm
The car will arrive at the 4S store in about 10 days after being shipped. Below is the relevant introduction about 4S stores: 1. Introduction: A 4S store, fully known as Automobile Sales Service shop 4S, is a sales store that integrates car sales, maintenance, parts, and information services. It was introduced to China from Europe after 1998. 2. Content: 4S stores are invested and built by dealers according to the standards set by car manufacturers. They feature unified design inside and outside the store, with huge investments often reaching tens of millions, offering a luxurious and comfortable environment. They are authorized to sell only a single brand of cars. 3. Scope: Generally, a 4S store operates under a single brand in a region, with one or several stores distributed at relatively equal distances. They are built according to the manufacturer's unified design requirements, involving massive investments often in the tens or even hundreds of millions, presenting a luxurious and grand appearance.
Was this review help?
5
2
Share
More Forum Discussions

What are the reasons for the rear wheel hub of a car to become hot?

Car rear wheel hub becoming hot may be due to prolonged friction between the tire and the ground or extended braking. Below is a detailed introduction about car wheel hubs: 1. Overview: The wheel hub (Car-Rim) is the central part of the wheel where the axle is installed, also known as the "wheel rim" or "steel rim." Wheel hubs are prone to accumulating dirt, and if not cleaned for a long time, they may corrode and deform, posing safety hazards. 2. Classification: Wheel hubs can be categorized into steel wheel hubs and alloy wheel hubs based on material, each with its own advantages and disadvantages. The main advantage of steel wheel hubs is their simple manufacturing process (usually using casting techniques, whereas aluminum alloy wheel hubs are typically produced using low-pressure casting), relatively lower cost, and stronger resistance to metal fatigue.
6
4
Share

How to Remove Black Scratches on the Car?

First, determine whether the black mark is from exposed plastic after the paint has been scraped off or from another vehicle's paint. The former can be removed by polishing, and if the black mark is large, touch-up paint may be required. The latter can be gently wiped off using paint remover or alcohol. Below is more information on car paint maintenance: 1. Rinse promptly after rain: Rainwater stains on the car body will gradually shrink, increasing the concentration of acidic substances in the rainwater. If not rinsed off with clean water promptly, these stains can damage the paint over time. 2. Avoid washing the car in direct sunlight or high temperatures: When washing the car, ensure the engine is cool and avoid washing under the sun or in high temperatures to prevent cleaning agents from drying and leaving marks. When washing the car yourself, use dedicated car wash soap and neutral water. Avoid using highly alkaline detergents like laundry powder, soap, or dishwashing liquid, as they can strip the protective oils from the paint and accelerate aging. 3. Use clean, soft cloths or sponges for washing: When wiping the car, use clean, soft cloths or sponges to avoid mixing in metal shavings or sand particles. Do not use dry cloths, towels, or sponges, as they may leave scratches. Wipe gently in the direction of water flow from top to bottom, avoiding circular or horizontal motions. 4. Remove highly corrosive stains promptly: Some highly corrosive stains must be cleaned immediately. Use dedicated cleaning agents for this purpose and avoid scraping with blades or using gasoline, as these can damage the paint.
3
2
Share

Can a Car with Dents Pass the Inspection?

Whether a car with dents can pass the inspection depends on the severity of the dents. Generally, minor dents can pass the annual inspection, as the inspection mainly focuses on the safety and modifications of the vehicle. However, if the dents are significant and the damage is extensive, the car may not pass, and the staff will require repairs and maintenance at a 4S shop before returning for re-inspection. Below is an introduction to the vehicle inspection content: 1. Check whether the engine, chassis, body, and their accessories are clean, complete, and functional, whether the paint is uniform and aesthetically pleasing, whether the main assemblies have been replaced, and whether they match the initial inspection records; 2. Test whether the vehicle's braking performance, steering control, lights, exhaust, and other safety features comply with the "Technical Conditions for Safe Operation of Motor Vehicles"; 3. Check whether the vehicle has been modified, remodeled, or altered, whether the driving license, license plate, and vehicle records match the current condition, and whether approval and change procedures have been completed; 4. Check whether the license plate, driving license, and enlarged license plate markings on the vehicle are damaged, altered, or illegible, and whether replacement is needed; 5. For large vehicles, check whether the unit name or the name of the street, township, or town where the vehicle is registered is written in imitation Song font on both sides of the door, along with the seating capacity in the cab; for trucks, check whether the rear panel (including the trailer rear panel) is marked with a license plate number enlarged 2-3 times, and whether the word "individual" is written on both sides of the door for privately owned or jointly operated vehicles.
2
5
Share

Does Drilling Holes on the Inner Side of the Rear Fender Have Any Impact?

Drilling holes on the inner side of the rear fender has certain negative effects. Below is a detailed introduction about car fenders: 1. Overview: The fender is the outer body panel that covers the wheel, named for its shape and position resembling a bird's wing on older car bodies. Based on installation position, it is divided into front fender and rear fender. The front fender is installed at the front wheel and must ensure the maximum space for the front wheel's rotation and movement. 2. Others: The rear fender does not have the issue of wheel rotation interference, but for aerodynamic considerations, it is slightly arched and protrudes outward. The fender is formed as one piece with the outer panel and reinforcement section using resin.
15
5
Share

Will an automatic transmission car roll back when parked on a slope?

Automatic transmission is simpler to operate than manual transmission, especially on slopes. Since the automatic transmission is always engaged and won't stall, it's more convenient. However, improper operation can still lead to unavoidable rolling back. Here are some tips to prevent rolling back: 1. Auto Hold function: Automatic transmission cars equipped with this feature won't roll back. Once Auto Hold is activated, the vehicle will stop after braking, making starts and stops very stable. So, Auto Hold is indeed a very useful feature. 2. If there is no Auto Hold: You can switch to manual mode, which prevents gear changes based on RPM and keeps the car in a low gear. This makes starting on a slope easier and reduces the chance of rolling back.
15
4
Share

What does Mercedes-Benz Night Edition mean?

Mercedes-Benz Night Edition is a coupe version of the S-Class launched by Mercedes-Benz. Below are specific details about Mercedes-Benz: Background: Mercedes-Benz is a world-renowned German automotive brand established in 1900, headquartered in Stuttgart, founded by Karl Benz and Gottlieb Daimler. Mercedes-Benz is globally known for its high-quality, high-performance automotive products. In addition to premium luxury cars, Mercedes-Benz is also the world's most famous manufacturer of large buses and heavy-duty trucks. Currently, Mercedes-Benz is a division under Daimler AG. Development History: The Mercedes-Benz automobile company was not founded by Mr. Benz alone; it was a collaboration between two automotive giants, namely the pioneers of automobile invention, Karl Friedrich Benz and Gottlieb Daimler. In 1926, these two major automobile companies merged to form Daimler-Benz AG. By this time, Daimler had already passed away, and Karl Benz was already 82 years old.
3
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.