How many days in advance should I book the Subject 2 test?

1 Answers
Samuel
07/29/25 6:20pm
Subject 2 test booking requires a 3-day advance reservation. Below is relevant information about Subject 2: Required materials for application: The applicant needs to register at the driving school and submit materials such as ID card and medical examination form. The driving school will collectively submit these materials to the vehicle management office for processing before the applicant can make an independent reservation. Currently, independent reservations are available from Subject 1 to Subject 4. Subject 2 test items: Subject 2, also known as the small road test, is part of the motor vehicle driver's license assessment and refers to the field driving skills test. The car test items include five mandatory tests: reversing into a parking space, parallel parking, stopping and starting on a slope, turning at a right angle, and driving along a curve.
Was this review help?
4
3
Share
More Forum Discussions

Can a Car in the Break-in Period Drive on the Highway?

It is possible for a car to drive on the highway during the break-in period, but it is recommended to keep the speed below 100 kilometers per hour and the engine RPM below 2,500. Here is more information about the car break-in period: 1. The break-in period generally refers to the initial operation process where mechanical components come into contact, rub, and mesh. During this period, it is essential to control the driving speed. 2. Taking the car on the highway during the break-in period not only tests its performance at high speeds but also helps clear engine carbon deposits caused by low-speed driving. Maintaining a speed of 100 kilometers per hour on the highway for about two hours is advisable, followed by a proper rest. Once the car has covered over 3,000 kilometers during the break-in period, it will reach an optimal condition.
4
2
Share

Why does the ABS light come on after a vehicle inspection?

After a vehicle inspection, the ABS light may come on because the four wheels of the car rotate at different speeds during the inspection process, causing the computer to collect incorrect speed data and triggering the light. If the self-check is normal after driving a few kilometers, the ABS light will automatically turn off. Here is more information about ABS: 1. ABS is part of the safety system. Its function is to prevent wheel lock-up during braking on slippery roads, thereby avoiding loss of vehicle control. 2. On smooth dry roads, loose gravel, loose soil, or deep snow-covered roads, the ABS system may not provide the shortest braking distance.
19
4
Share

What is the valve train assembly composed of?

The valve train assembly consists of components such as the valve timing gear, camshaft and its components, rocker arm shaft and rocker arm assembly, valve pushrod, valve, cylinder head, valve seat, valve guide, valve spring, valve lock piece and its components, valve adjusting screw, etc. Here is more information about the valve train assembly: 1. The valve train assembly includes all parts from the timing gear to those that actuate the valve movement. Its composition varies depending on the type of valve mechanism, and its function is to drive the valves to open and close at the correct timing. 2. The engine valve mechanism consists of two main parts: the valve group and the valve train assembly.
1
2
Share

How to set the time for the 2015 GL8?

15 GL8 time adjustment method: 1. Turn on the radio power. 2. Locate the "RPT" button on the panel and press and hold it for 3 seconds. 3. When the screen display starts flashing, rotate the knob on the right to adjust the hour. 4. Press the center button of the right knob to adjust the minutes. 5. Turn off the radio to complete the time adjustment. Appearance introduction of the new GL8: 1. Front of the new GL8: It features a brand-new design with an electroplated and sprayed process that enhances the texture of the front grille. The chrome trim around the grille connects with the headlights, and the design of the headlights on both sides of the grille has been redesigned for a more integrated look. 2. Rear of the new GL8: It incorporates more curved designs, giving it a stronger sense of layering. The chrome trim connecting the taillights has been removed, and a silver decorative strip extending to both sides of the body has been added below the trunk, making it look more stretched.
6
0
Share

What is the normal tire pressure for the Buick Verano?

The normal tire pressure range for the Verano is 2.4-2.5bar. Due to seasonal factors, the tire pressure can be appropriately increased by 0.2bar in winter and reduced by 0.1bar in summer. This data is based on the international GBT2978-2008 standard. The Verano's tire pressure monitoring system is indirect, utilizing the vehicle's ABS balance control, and only displays low pressure when there is a leak. To check the tire pressure, first prepare a tire pressure gauge, locate the position of the factory tire pressure label, press the gauge onto the tire valve to measure and read the value, and remember to replace the valve cap after checking. Generally, a tire pressure above 2.8bar is considered too high, and below 2.0bar is too low. Hazards of over-inflation: Reduced tire friction and adhesion, affecting braking performance; causes steering wheel vibration and deviation, reducing driving comfort; accelerates wear on the central tread pattern, shortening tire lifespan; increases vehicle vibration, indirectly affecting the lifespan of other components; overstretches tire cords, reducing elasticity and increasing the load on the vehicle during driving. Hazards of under-inflation: Increased friction coefficient with the road surface, leading to higher fuel consumption; makes the steering wheel heavy and prone to deviation, compromising driving safety; increases movement in various parts of the tire, causing abnormal heat due to excessive rolling; weakens cord and rubber functions, leading to delamination or cord breakage and excessive friction with the rim, damaging the bead area and causing abnormal wear; multiplies friction between the tire and ground, sharply raising tire temperature, softening the tire, and drastically reducing strength. High-speed driving may result in a blowout. If the tire pressure monitoring indicator lights up (a yellow symbol with an irregular circle, no stamp on top, four small spikes below, and an exclamation mark inside), there are generally three possible reasons: Abnormal tire pressure: Typically alerts when pressure is below 1.8bar or above 3.0bar. In this case, tire inspection and pressure adjustment are required. Tire pressure monitoring not reset: After inflating the tires, the system wasn't reset, so it still records the previous data, causing the indicator to light up. Simply reset the tire pressure monitoring. Damaged tire pressure sensor: The sensor, installed inside the tire and connected to the inflation valve, monitors tire pressure. If damaged during driving (e.g., by impact), the tire pressure warning light will activate. A damaged sensor must be replaced with a new one.
12
3
Share

What material is the brake disc of the Malibu XL made of?

The brake disc of the Malibu XL is made of cast iron. The brake disc is a round disc that rotates as the vehicle moves. The brake caliper clamps the brake disc to generate braking force, which slows down or stops the vehicle when the brake is applied. The advantages of brake discs are as follows: 1. Continuous braking is less likely to cause brake fade and failure. 2. The change in size of the brake disc due to heat does not increase the travel distance of the brake pedal. 3. The disc brake system responds quickly and can perform high-frequency braking actions, making it more suitable for ABS system requirements. 4. The braking force is more evenly distributed between the left and right wheels with disc brakes. 5. The better drainage of brake discs reduces the likelihood of poor braking caused by water or mud. 6. The structure is simple and easy to maintain.
1
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.