How Many Days in Advance Does the Traffic Management 12123 Stop Accepting Appointments?

2 Answers
StLillian
07/29/25 8:21am
The Traffic Management 12123 stops accepting appointments 1 day in advance. Introduction to Appointment Cancellation: If a student cannot attend the exam at the scheduled time, they should cancel the appointment one day in advance. Failure to attend the exam as scheduled will result in a failing grade for the current exam. If the appointment has not yet received an SMS notification, the cancellation can be done on the Traffic Management 12123 platform. For those who have already received an SMS reminder, they need to bring their ID card to the vehicle management office to apply for cancellation. Notes: Be sure to fill in the information carefully. The mobile phone number must match the one used when applying for the motor vehicle or driver's license; otherwise, normal registration will not be possible. If the mobile phone number has been changed, the user must go to the traffic police station window to complete the change procedure.
Was this review help?
5
0
Share
BrooklynRose
08/12/25 11:31am
When I was taking my driver's license test, I often used the Traffic Management 12123 APP. Exam scheduling usually stops three days in advance. For example, if you plan to take the test this Friday, you must complete the reservation by Tuesday at the latest. I remember once trying to change the time on Wednesday, but the system no longer allowed me to operate as the slots were already full. The APP is indeed convenient; besides scheduling exams, you can also check for violations and pay fines. I'm used to setting up phone reminders to avoid waiting until the last minute. It's best to start checking a week in advance. Opening the exam scheduling module on the APP's homepage shows the timetable and deadline reminders, preventing missed opportunities that could affect your driving progress. This method saves the hassle of going to the vehicle management office.
Was this review help?
5
3
Share
Expand All
More Forum Discussions

How to Replace Car Spark Plugs?

Steps for replacing spark plugs: Open the hood, lift the plastic cover of the engine, remove the high-voltage ignition wires, and mark each cylinder's position to avoid confusion. Use a spark plug socket to remove the spark plugs one by one. While removing, check for any external debris like leaves or dust and ensure they are thoroughly cleaned. Place the new spark plug into the spark plug hole, hand-tighten it a few turns, and then use the socket to tighten it further. Reinstall the high-voltage ignition wires in the firing order and secure the cover. If a spark plug is damaged, it can directly cause issues such as leakage in the vehicle's ignition system, increased fuel consumption, reduced power, and most notably, difficulty starting, affecting the vehicle's normal operation. Severe spark plug erosion—such as scarring, damage, or melted electrodes—indicates that the spark plug is ruined and should be replaced. Under normal maintenance conditions, spark plugs should be replaced every 40,000 to 60,000 kilometers. However, this may vary depending on the brand and engine type, so it's recommended to follow the owner's manual. For reference, the following standards can be used for maintenance replacement: platinum spark plugs at 40,000 km, standard nickel alloy spark plugs at 20,000 km, and iridium spark plugs at 60,000 to 80,000 km.
20
4
Share

What is the working principle of a circuit breaker?

The working principle of a circuit breaker is that when a short circuit occurs, the magnetic field generated by a large current (generally 10 to 12 times the normal current) overcomes the reaction force spring, causing the trip unit to pull the operating mechanism and instantly trip the switch. In the case of overload, the current increases, heat intensifies, and the bimetallic strip deforms to a certain extent, pushing the mechanism to act (the larger the current, the shorter the action time). Below is detailed information about circuit breakers: 1. Professionally, a circuit breaker is called a circuit interrupter. Its function is to cut off and connect load circuits, as well as to disconnect faulty circuits, preventing accidents from escalating and ensuring safe operation. High-voltage circuit breakers must interrupt arcs with voltages of 1500V and currents of 1500-2000A. These arcs can stretch up to 2m and continue to burn without extinguishing. Therefore, arc extinguishing is a critical problem that high-voltage circuit breakers must solve. 2. The principle of arc blowing and extinguishing mainly involves cooling the arc to weaken thermal ionization. On the other hand, blowing the arc lengthens it, enhancing the recombination and diffusion of charged particles. Simultaneously, it disperses the charged particles in the arc gap, quickly restoring the insulating strength of the medium. Low-voltage circuit breakers, also known as automatic air switches, can be used to connect and disconnect load circuits, as well as to control infrequently started motors. Their functions are equivalent to the combined or partial functions of knife switches, overcurrent relays, undervoltage relays, thermal relays, and leakage protectors. They are an important protective device in low-voltage distribution networks.
11
4
Share

Why is the car windshield washer fluid not spraying?

Failure to spray windshield washer fluid is often due to the fluid level being too low. Even if there is still water in the reservoir, if it doesn't reach the standard height, the fluid won't spray. Here are several reasons why the windshield washer fluid may not spray: 1. The washer fluid is full but still won't spray—this could be because the spray nozzle is clogged with dust. Simply use a fine needle to unclog the nozzle. 2. In winter, the reservoir or tubing may be frozen. After warming up the car sufficiently, park it in the sun to thaw. If it sprays afterward, consider switching to a higher-grade antifreeze washer fluid. 3. When trying to spray the fluid, if there's no sound from the motor and the wipers don't work, it might be due to a blown fuse or a damaged motor. 4. If none of the above reasons apply and the washer fluid still won't spray, take the car to a professional repair shop for inspection.
7
5
Share

Is It Correct Not to Perform Wheel Alignment Lightly?

It is correct not to perform wheel alignment lightly. Wheel alignment should only be considered when the vehicle exhibits symptoms such as drifting, reduced steering accuracy, misaligned steering wheel, or severe tire wear, provided that the dynamic balance is normal. Wheel alignment involves adjusting the geometric angles of the wheels and steering components to ensure tight contact between the wheels and the ground. Generally, after replacing or repairing suspension and steering system components, a wheel alignment is necessary to adjust the precision angles of various parts of the vehicle's chassis system. If the wheel alignment is inaccurate, it can cause excessive wear on the vehicle's chassis system. Based on the vehicle's four-wheel parameters, adjustments are made to ensure optimal driving performance and reliability.
2
1
Share

How to Turn Off the Start-Stop Function on the Malibu XL?

Vehicles equipped with automatic start-stop have this function enabled by default. The method to turn off the automatic start-stop on the Malibu XL is as follows: The owner can directly press the automatic start-stop button, and the dashboard will usually prompt that the system has been turned off. Below are situations where it is recommended to turn off the automatic start-stop: 1. When driving on steep slopes, it is advisable to avoid using the automatic start-stop. Although the start-stop duration is brief, the engine's start-stop on a slope may lead to insufficient brake assistance. 2. During extremely hot weather in the south when the air conditioning is running at full capacity, it is best to turn off the automatic start-stop function. This is because the air conditioning requires significant power consumption, and the vehicle's electrical system may not provide enough power to keep the air conditioning running when the engine is off, causing discomfort to passengers. 3. When driving through water, it is recommended to turn off the start-stop system to prevent the engine from shutting down if the vehicle stops mid-drive. A sudden reduction in exhaust pressure could allow water to flow back into the engine through the exhaust pipe, potentially preventing the engine from restarting. 4. In cases of severe traffic congestion, it is also advisable to turn off the automatic start-stop. Prolonged engine shutdowns can cause the combustion chamber temperature to drop, leading to the formation of carbon deposits from unburned hydrocarbons and paraffin on the cylinder walls. These deposits can increase fuel consumption and reduce engine power, counteracting the fuel-saving purpose of the automatic start-stop function.
20
4
Share

What does the windshield washer fluid symbol look like?

The windshield washer fluid symbol is a blue plastic cap with a water spray pattern. The inlet for adding windshield washer fluid is marked with this symbol, so you can locate it to pour in the washer fluid. Windshield washer fluid, commonly known as glass water, is a consumable item used in cars. High-quality windshield washer fluid is mainly composed of water, alcohol, ethylene glycol, corrosion inhibitors, and various surfactants. When you notice reduced transparency in the front windshield, spraying some washer fluid can restore a clear and bright view. Especially during nighttime driving, dust on the glass can scatter light, making it necessary to spray washer fluid to maintain the windshield's transparency.
6
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.