How Many Days Does the DMV Usually Take to Mail License Plates?

2 Answers
SimonRose
07/29/25 4:28am
New vehicles generally take fifteen working days to complete the production of license plates. Below is the method for affixing temporary license plates for vehicles: One plate: A single temporary license plate should be affixed to the lower left or right corner of the front windshield, ideally without obstructing the driver's view. Two plates: If there are two temporary license plates, one should be affixed to the front windshield, and the other should be placed on the lower left corner of the rear windshield inside the vehicle. If there is no space on the rear windshield, the second temporary license plate should still be carried in the vehicle. Below is additional relevant information: Traffic law regulations: Vehicle owners should note that temporary license plates are subject to the same traffic laws as regular license plates. Therefore, do not assume that temporary plates allow reckless behavior or that they are too small to be captured by cameras—high-definition cameras can clearly photograph temporary plates. Temporary license plates: There are two types of temporary plates. One has a light blue background with black characters and borders, limited to driving within the city (local temporary plates). The other has a brown-yellow background with black characters and borders, allowing for intercity travel (non-local temporary plates).
Was this review help?
15
2
Share
LaneRose
08/12/25 4:48pm
I remember waiting almost 10 days to receive my new license plates last time, which was quite agonizing. Generally, it takes the DMV 7 to 14 days to mail out plates, depending on courier speed and location. In first-tier cities during peak periods, it might drag on for two weeks, while smaller towns are faster. I'd advise against long-distance driving while waiting—if using temporary plates, make sure they're securely attached to avoid tickets. If in a hurry, you can check the progress on the local DMV website or call their hotline. Stay vigilant too—don’t fall for rumors about expedited processing; stick to official channels for reliability. Just be patient, safety first anyway.
Was this review help?
18
4
Share
Expand All
More Forum Discussions

How to reset the maintenance light on Audi S3?

Audi S3 maintenance light reset method: 1. Press and hold the button next to the odometer, turn ignition switch ON; 2. SERVICE or SERVICEIN will appear on the LCD display; 3. Release the button, press the button on the left side of the instrument panel (near the tachometer) to reset the display, and SERVICEIN10000MI will appear on the LCD; 4. Turn ignition switch to OFF position. For interior features, the Audi S3 comes with a three-spoke sport steering wheel, gray-white dashboard needles, combined with all-black interior, giving the new car's cabin a thoroughly sporty style.
16
2
Share

How many cylinders does the Sylphy engine have?

Sylphy is equipped with a four-cylinder engine. The Sylphy uses a 1.6-liter naturally aspirated four-cylinder engine with the model code HR16, delivering a maximum power of 102 kW and a maximum torque of 169 Nm. This engine features multi-point fuel injection technology and utilizes an aluminum alloy cylinder head and block. It is paired with either a 5-speed manual transmission or a CVT transmission. The Sylphy is a compact family sedan under the Nissan brand, with a wheelbase of 2,712 mm and dimensions of 4,641 mm in length, 1,815 mm in width, and 1,450 mm in height. The front suspension of the Sylphy employs a MacPherson independent suspension, while the rear suspension uses a torsion beam non-independent suspension. The torsion beam rear suspension is designed to maximize rear passenger space and trunk capacity.
15
0
Share

Is the engine of the Mazda3 a three-cylinder or four-cylinder?

The engine of the Mazda3 is a four-cylinder. In terms of power, the Mazda3 offers a choice between a 1.5-liter naturally aspirated engine and a 2.0-liter naturally aspirated engine. The 1.5-liter version delivers a maximum horsepower of 117 hp, a maximum power of 86 kW, and a maximum torque of 148 Nm. The Mazda3 is a compact car under Changan Mazda, with dimensions of 4662 mm in length, 1797 mm in width, and 1445 mm in height, and a wheelbase of 2726 mm. For the suspension, the Mazda3 features a MacPherson strut front suspension and a torsion beam rear suspension.
4
4
Share

What are the reasons for failing the written test (Subject 1)?

It might be due to insufficient practice. Here are some methods for Subject 1 preparation: 1. Directly judge right/wrong: These keywords in questions indicate correct answers: prohibited, must not, cannot, do not, yield by stopping, yield by slowing down, avoid by slowing down, wait in line, preserve the scene, keep right; These keywords indicate wrong answers: accelerate, unnecessary, no need, coast in neutral, emergency brake, refuse to yield, immediately. 2. Overtaking restrictions: Never overtake these vehicles: ambulances, fire trucks, police cars on emergency duty, rescue vehicles; Never overtake in these areas: crosswalks, narrow roads, curves, narrow bridges, railroad crossings, tunnels.
15
1
Share

What are the dimensions of the Lavida car?

The dimensions of the Lavida car are: for the sedan version, the length, width, and height are 4670 mm, 1806 mm, and 1474 mm respectively, with a wheelbase of 2688 mm; for the hatchback version, the length, width, and height are 4541 mm, 1806 mm, and 1488 mm respectively, with a wheelbase of 2688 mm. The Lavida's in-car navigation system combines touch screen and rotary knob controls, and includes MP3 playback capability, supporting USB, AUX, and SD card expansion slots for ease of use and powerful functionality. The LCD screen features a foldable design. The Lavida is front-wheel drive, with a front suspension type of MacPherson independent suspension and a rear suspension type of torsion beam semi-independent suspension.
10
1
Share

Which model is the Sylphy 59800?

Sylphy 59800 refers to the Sylphy Classic model. The exterior of the Sylphy Classic is quite similar to the newer models, but the rear emblem has been updated—newer models feature the SYLPHY Classic badge. The Sylphy 59800 is positioned as a family-oriented compact car, with dimensions of 4641mm in length, 1815mm in width, and 1450mm in height, and a wheelbase of 2712mm. It is powered by a 1.6L naturally aspirated engine, delivering a maximum power of 139 horsepower and a peak torque of 169 Nm. The transmission options include a 5-speed manual gearbox and a CVT (continuously variable transmission).
7
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.